subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 1200)
Used plate pasteurizer made by Gea, type 161. New 1986. Max. pressure 4 Bar, max. working temperature 100 ° C, volume 209 L, extension 881-938 mm. Capacity 7550 kg / h. ... más información
There are two identical silos available, capacity: 24m³, width: 3000mm, height: 4750mm, was used for storing polycarbonate. ... más información
Normal steel Volume: 25 litres, drive: 3 kW ... más información
No.: 12690 Year of construction: 1987 top condition Head with jacket Hopper and discharge chute Power: 2.2 kW Off switch available Dimensions: LBM = 300x400x770mm Weight: approx. 45 kg ... más información
Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!) ... más información
Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg overhauled, ready to use ... más información
Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!) ... más información
Diatomaceous earth filter capacity 45 liters, operating pressure 2.5 bar. Suitable for filtration of cutting oils of automatic lathes. ... más información
Corundum disc mill Manufacturer: Fryma Type: MK-95/R No.: 215747 Year of construction: 1987 Power: 3.3 kW in EEx protection new grinding disc, with spare discs with hopper mounted on a mobile wagon LBH: 800 x 600 x 1720 mm ... más información
Bead Mill Manufacturer: Fryma Type: MSM-50 Year of construction: 1987 No.: M12671 Pressure working space: 2.5-0.2 bar Pressure double jacket: 2.0-0.2 bar Power: 45 kW with pressure gauge, with temperature gauge as good as new grinding set movable on castors Control cabinet is missing LBH: 1600 x 1000 x 2400 mm
Colloid Mill Manufacturer: Fryma Type: MZ 80/A Factory No.: M13063 Power: 2.2 kW Year of construction: 1987 Working room pressure: 1 bar very good condition with double jacket with outlet chute with pressure gauge LBH: 370 x 340 x 760 mm ... más información
Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...
Laboratory processing plant UNIMIX Manufacturer: Haagen & Rinau Factory no.: 865 3779 Built: 1979 Permissible operating overpressure: container: 4 bar, tube side: 6 bar Total content: 5.5 l Usable volume: 3 l with speed-controlled agitator with speed-controlled homogenizer integrated heating Vertical stroke (water hydraulics) with temperature regulatioin with control system LWH: 750 x 360 x 850 mm
Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg
Agitator containers Volume: 150 l Built: 1987 with propeller mixer Power: 0.55 kW 1380/224 rpm LWH: 750 x 700 x 1950 mm ... más información
Agitator containers Volume: 150 l Built: 1987 with propeller mixer Power: 0.55 kW 1380/224 rpm good condition LWH: 670 x 670 x 1950 mm ... más información
Excenter screw pump Manufacturer: Fryma Type: NE20A Built: 1987 Power: 0.55 kW good condition LWH: 1100 x 300 x 270 mm ... más información
Excenter screw pump Manufacturer: Fryma Type: N20A Built: 1987 Speed: 700 rpm very good condition LWH: 1200 x 350 x 410 mm ... más información
Centrifugal pump Manufacturer: VEB Kyffhäuserhütte Artern Type: KSP 65/180-1,3 Item #: 98605 Year of construction: 1987 Power: 3.8 kW standing on feet very good condition LWH: 560 x 250 x 450 mm ... más información
Material: Stainless steel 1.4541 Weight: 350 kg Dimensions L x W x H: 1730 mm x 500 mm x 800 mm; 2 machines available. ... más información