- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- ABS Trading (2)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- Allround (3)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARCUS (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- BALLERSTAEDT (1)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMASCH (1)
- BAUMER (3)
- Bavelloni (6)
- ... mais
Fabricante:
(Categoria: 1300)
Ano de construção: 2001
usava
1 piece Conveyor belt, No. 10-323 Manufacturer: MaTech GmbH/ Germany Type: Tape 40 x 06 (4000 x 450 mm) Year of manufacture: 2001 – never used Machine number: 465/01-03 Belt length: 4080 mm usable Belt width: 530 mm usable Belt tensioning device: via adjusting screws Height: 950 mm Belt speed: 1 – 30 m/sec Drive: Drum motor 1.1 kW, 400 V, 50 Hz Control: NEW contactor control with frequency converter and Pilz PNOZ Safety Relay Safety: Emergency stop via 2 rip cords alongside; Dimensions: 4300 x 1000 x 370 mm Weight: approx. 600 kg • Mint condition, as never in use • Stainless steel exterior cladding • New control panel, machine function-tested before delivery • New square tube base frame
Ano de construção: 2006
usava
Fusing width: 600mm, max. temperature: 200°C, conveyor speed: 1-9m/min, connected load: 6.7kW, weight: 180kg, with documentation. ... mais informação
Ano de construção: 2006
usava
Automation of the packaging process, including (1) Industrial Robot Kuka KR 3, weight: 53kg, year of construction: 2005 (2) 2x Labelling Machine Etipack SURPRISE 13, year of construction: 2007. ... mais informação
Ano de construção: 1993
usava
Max. load: 5kg, weight: 350kg, including controls and documentation. ... mais informação
usava
Max. cutting width: 700mm, cutting speed adjustable, without documentation, spare parts or spare parts, an inspection is possible. ... mais informação
usava
The robot is unused and still in its original packaging. ... mais informação
Ano de construção: 2011
usava
Connected load: 36kW, length: 2750mm, width: 2750mm, height: 2000mm, weight: 2.5t, with documentation, operating hours: 20h, an on-site inspection is possible. ... mais informação
usava
There are 12 identical Rittal control cabinets available, the control cabinets are still in their original packaging. ... mais informação
Ano de construção: 2015
usava
Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible. ... mais informação
Ano de construção: 2015
usava
The StyleShoots Horizontal, designed for flatlay product photography, contains a Canon EOS 5D Mark III with a Canon EF 24-105mm f/4L IS USM lens. Length: 2820mm, width: 2160mm, height: 2600mm, very little documentation available, an inspection is possible. ... mais informação
Ano de construção: 1965
usava
Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. ... mais informação
Ano de construção: 2009
usava
The system has limited functionality, the camera has a bug, which leads to longer test times, was used until the beginning of 2023, with calibration plate for the camera. ... mais informação
Ano de construção: 2008
usava
There are two identical machines available, year of construction machine 1/ 2: 2003/ 2008, with documentation, were part of a flexo printing machine Fischer & Krecke 16S/10. ... mais informação
Ano de construção: 2010
usava
X-travel: 700mm, y-travel: 450mm, z-travel: 450mm, max. load: 500kg, table dimensions: 1100x820mm, connected load: 1500VA, weight: 1.02t, with documentation. ... mais informação
Ano de construção: 1978
usava
Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. ... mais informação
Ano de construção: 1987
usava
Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible. ... mais informação
Ano de construção: 1999
usava
With computer, Windows XP, tray support, 12x feeder base plate and documentation, over the years the following parts have been replaced: placement head (Z-axis), control board placement head, main board laser, all belts, head cable, PC (already with Windows XP), the placement machine last ran in 2020, since then it has been unused, was maintained regularly.
Ano de construção: 2010
usava
Two identical machines are available, max. speed: 600m/min, min. width 250mm, roll diameter: 200-800mm, roll width: 600-4000mm, thickness: 54-350µm, with documentation and spare parts, has been regularly serviced, on-site inspection is possible. ... mais informação
Ano de construção: 2014
usava
Max. printing area: 400x400mm, frame dimensions: 450x450-736x736mm, axis range: +/-5mm, connected load: 600W, length: 1540mm, width: 872mm, height: 1380mm, weight: 450kg, suitable for series production with small and medium quantities, quick changeover between individual jobs, suitable for double-sided PCBs, magnetic table with vacuum block, fast printing accuracy and high repeat accuracy, has been regularly serviced, on-site inspection is possible.
Ano de construção: 2016
usava
Max. printing format: 1200x650mm, max. printing speed: 1000mm/s, connected load: 8kW, with documentation, has been regularly serviced by the manufacturer, on-site inspection is possible. ... mais informação