sierras usadas para la venta

Cut-off band saw Canali Type: HBSG Saw roller diameter 1000 mm Cutting height approx. 500 mm Motor approx. 11 kW hydraulic feed table incl. some saw blades well-functioning condition  ... más información

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

Kälin type KA 250 multi-blade circular saw for sawing, trimming, ripping or grooving boards with accessories and laser., chain width: 250 mm, cutting height: Max. 100 mm ... más información

Cross-cutting saw or pendulum saw Pfeiffer type EP-125 with stable roller conveyor., cutting height: 150 mm, cutting width: 450 mm, Roller conveyor length: 2.5 + 3.5m ... más información

Saw blade swivel: 45 °, carriage length: 3200 mm, cutting width: 1300 mm, motor power: 5.5 kW, saw blade diameter: 450 mm, machine weight, approx. 1000 kg, scoring unit, motor brake, eletr. Dissimulation.  ... más información

From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm  ... más información

SPECIFICATIONS: Flywheel diameter: 700 mm Installed power: 3.0 KW Voltage: 380 volts Complete with saw blades  ... más información

cutting width: max. 330 mmCutting height: max. 150 mmSaw blade diameter: 550 mmMotor output: 7,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 550 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 220x150/330x50 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 7.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations and e ...

cutting width: max. 610 mmCutting height: max. 150 mmSaw blade diameter: 600 mmMotor output: 9,2 kWturning speeds: 2750 U/minRequired air-pressure: 7 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 770x1385x1370 mmSALVAMAC Legend 600 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 420x150/520x100/610x30 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 9.2 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibration ...

cutting width: max. 375 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 500fast semi-automatic chop saw-------------------------------------------------- -Maximum cutting areaOption A: 220x125/310x50mmOption B: 350x80/375x50mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 5.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations an ...

Optimization cross-cut saw Dimter type OptiCut 150 for full optimization with chalk line detection and inlet and outlet., Technical specifications: tba ... más información

Carpentry tenon cutting machine Schneider SK A 4 S Swivel Automatic swivel readable via a scale 90 degrees - 30 degrees ( 60 degrees ) Power current Cutting height 450 mm Cutting width 240 mm Cutting depth 360 mm Motor power 3 KW Laser Cutting Display Chassis Top Condition Functionally tested Shipping available at an additional cost

I sell a vertical band saw fields hammer N4400. Motor power 3.0KW Suitable for saw blades up to 35mm Swivel table. Year of construction 2009 Condition as good as new. Available soon.  ... más información

Multi-saw edger by FOD Bydgoszcz DPPA-II-50-E with electronic blade setting – Polish production – DTR – fixed sleeve – movable dial with the possibility of programming 8 fixed dimensions TECHNICAL PARAMETERS: - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speeds - feed motor power 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electronic adjustment of disc spacing with programmable fixed dimensions - fixed edging sleeve 60 mm - one movable disc - two rows of anti-kickback pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 270x165x220 cm weight ~ 2000 kg

Linck 700 x 100 edger - German production - hydraulic disc shifting TECHNICAL PARAMETERS: - cutting width max 550 mm - cutting height max 100 mm - element width max 700 mm - engine power 22 kW - feed smoothly adjustable from 10 - 60 m/min - working length of the fixed sleeve 120 mm - working length of the movable sleeve 120 mm - minimum element length 600 mm - disc diameter max 350 mm - spindle diameter 55 mm - sleeve diameter 85 mm - spindle with steady rest - two upper pulling rollers - two lower pulling rollers - two auxiliary rollers in the tabletop - feeder length 3700 mm - feeder width 700 mm - four rollers in the table - adjustment of the disc spacing from the feeder - a row of anti-kickback pawls Transport dimensions 380x220x150 cm weight ~ 2000 kg

Cutting height: 125 mmMotor output: 3 kWcutting width: 700 mmSaw blade diameter: 450 mmcutting width: ca. 700 mmLength of the roller table: links. 2.000 mmLength of the roller table: rechts. 2.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Sawblade tiltable: 45 °Length of the rolling table: 2.800 mmcutting width: ca. 1.100 mmMotor output: 7,5 kWCutting height: ca. 153 mmSaw blade diameter: 450 mmSpeed: 3/4/5/6.000 U/min.weight of the machine ca.: ca 1.000 kg: Ja : Ja : Hydraulisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length of the rolling table: 3.300 mmcutting width: 800 mmMotor output: 5,5 kWCutting height: 145 mmSaw blade diameter: 450 mmSpeed: 2800/4000/5500 U/min.weight of the machine ca.: ca. 900 kg: Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single str ...

Used sliding table saw Int. Art. Ref. m3527 Manufacturer: LAZZARI Type JUNO 3200 Year of construction 2000 CE With scoring machine Saw blade can be swivelled up to 45° Motor power 5.5 kW Speeds 2,800 and 4,000 rpm. Carriage length 3.20 m Weight approx. 750 kg Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shi ...