fresadoras usadas para venda

Spindle moulder with fixed spindle, table with extensionsTable length: 1750 x 500 mmSupport rail in the frontsiko reading for setting input and output supportLateral tenoning carriageSpindle diameter: 50 mmHeight motorised with digital readoutMotor 5,5 kWSpindle speed,3000, 4500, 6000, 8000, 10500 ... mais informação

Rover Machining center biesse rover c6.50 very good condition about 6000 h, one 4 axis spindle, 1 3 axis spindle, drilling block biesse works software Machine visible in operation ... mais informação

Hofmann TFS 107 table milling machine for profiling and milling wood with electric height and swivel adjustment as well Sliding carriage roll table., table size: 1,200 x 815mm, Direction of rotation: Left Right, Spindle ø: 30 mm, clamping length: 140 mm, number of revolutions: 3,000 / 4,500 / 6,000 / 9,000 rpm

BIESSE ROVER A 3.40 machining centre Working Range X: 3060mm Working range Y: 1260 mm Working range Z: 150 mm Number of electrospindles: 1 Main motor 12 kW Tool magazine slots: 18 Vertical drilling spindles: 14 Machine Table: Traverse Table Software: BIESSE BIESSEWORKS ADVANCED + additionally on board Machine control: BIESSE XP 600 - Manual control panel: Yes Fabric stands: yes ( new suction cup rubbers ) - BIESSE ATS: Yes Fixed mounting points for chiller: yes Material clamping system: HSK-F63 Horizontal drilling spindles in the X-axis: 4 Horizontal drilling spindles in the Y axis: 2 Sawing unit: in X direction - Boom Design: Yes Number of traverses: 6 Vacuum pump: Yes Vacuum pump capacity m³/h: 90 - CAD (.dxf) reading interface: yes

Manufacturer Ganner Maschineprotuktion, Austria automatic drilling of holes in panel parts of furniture, including drilling of sockets for installation of accessories, as well as automatic mounting of accessories. Distinctive features: Rigid stable design - a work table with PVC rollers, eliminating damage to workpieces when moving; - rack-and-pinion drive drive for feeding a drilling support, feed speed up to 75 m / min; -controlled axis Y of the drilling support allows you to process workpieces with a width of 130 mm to 700 mm; -controlled Z-axis of the drilling support allows drilling to a depth of 35 mm (drill length 70 mm), with the possibility of through-hole drilling; -controlled X axis of the longitudinal support with rack and pinion drive and linear guides, speed up to 120 m / min for moving and positioning workpieces with lengths from 250 mm to 2300 mm; -controlled Y a ...

Used CNC-processing centre Brand: HOMAG Type: OPTIMAT BAZ222/60/K Not rebuilt-without warranty Year: 2010 with gluing unit with FLEX-5unit Workpiece length max: - All units: singe field 6.000mm, pendular process 2.375mm, - At tool-Ø 25mm: 6.175mm, pendular 2550mm Workpiece width max. frontal: - All units 1150mm, - At milling process with tool-diam. 25 mm: 1220mm, - At edge banding: 1220mm at workpiece thickness max. 40 mm rear: - All units 1400mm, - At milling process with tool-Ø 25 mm: 1550mm, - At egde banding 1475mm - with standard flush milling and gluing 1500mm Workpiece thickness: - Max. 300 mm inclusive chuck at use as top miller - Up to max. 60 mm with standard clamping without limits for units and suction - Min. 12 mm at chamfer milling - Min. 16 mm at radius millers or min. 2 x Radius + 10 mm Main spindle 15 KW, HSK F63 C-Axi ...

Manufacturer: Friulmac , Type: Quadromat S, Year: 2010, Machine no 1: yes, Motore Maschine 1: 3, Machine 2: yes, Motore Maschine 2: 3, Conveyor: yes, Work piece width min-max mm: 207-800, Min.-max. workpiece length in mm: 250-2010, Min.-max. workpiece height in mm: 7-22, Feeding speed min-max m/min: 10-90, Feed stepless: yes, Overall milling units: 3+3, Year :2010

- German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting to the line and zyzgka - loading with a conveyor with spacers - package width 600 mm - split ironing length Dimensions of the folding machine - length 42000 mm - width 6000 mm - height 2100 mm

- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box  ... mais informação

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.  ... mais informação

Holzher uni master 7226 Use but in working condition ... mais informação

Used Casadei mc 30/12 Wood CNC machining centre drilling head with 16 bits, joint cutter and pantograph Year 2010 ... mais informação

Illumina MiSeq uses sequencing by synthesis (SBS) technology: cluster generation+ sequencing+ data analysis in a very short time. Key features - Automation: Miseq includes a buffer bottle, flow cell and reagent cartridge, designed to enable both cluster generation and sequencing with unrivalled efficiency. - Time-saving: integrated Real Time Analysis (RTA) software analyzes data on the instrument in real time, saving valuable analysis time. - Applications: Whole genome sequencing (WGS), exome sequencing (WES), specific sequencing of gene panels of interest, sequencing and assembly of new genomes, mitochondrial sequencing, epigenetics, metagenomics .../... Functional device shut down in Dec. 2022 - Last Illumina preventive maintenance performed in October 2022. Dimensions in cm : 52.3x68.6x56.5 Weight in kg : 57.2 Power supply: 100 to 240 V AC at 50/60Hz, 10A, 400W NRTL IE ...

X : 3200 mm Y : 1250 mm Z : 250 mm X axis speed : 60 m Y axis speed : 60 m Z axis speed : 25 m ... mais informação

) Mortising depth 100 / 150 mm-) nominal no load speed 1/min - 4050) rated power 2500 W-) weight 8.7 kg-) universal motor 230 V / 50 Hz transverse stop best. No. 200954 1 Allen key 4 mm best. No. 093074 1 Allen key 8 mm best. No. 093070 1 connection cable 10 m best. No. 087612 â?¾Zapfenlöcher â?¾Materialeinsatz such as: Solid wood, laminated wood â?¾Ergonomische handle and switch arrangement - for safe, efficient and energy-saving work. â?¾Geringes weight - ideal for use on construction sites. â?¾Extrem powerful motor - for high efficiency and saving time. â?¾Einzigartiges light-weight 8.7 kg. â?¾Der long cross fence holder with large adjustment range allows you to work on large-scale wood. â?¾DAS clamping system in the LS 103 EC allows a quick chain change. Even a tighten ...

Working size 420x280x60cm With 4 spindles head  ... mais informação

ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO CN – CE RULES - max. horizontal tenon length 160 mm - max. vertical tenon length 100 mm - max. bench inclination 20° - inclination of workpiece support guides: 45° - production: 600/700 tenons per hour - spindle Ø 25 mm - benchs: dimensions 315x360 mm longitudinal axis inclination 0° ÷ -20° piece support guide adjustment 0° ÷ 45° - Numerical Control piece support guide adjustment 0° ÷ 45° axis movements 2 DC motors brushless” X axis stroke 600 mm Y axis stroke 200 mm X, Y axis speed 15 m/min. execution of programs in quick tasks program memory 1000 pcs. programming using macros - 9000 / 12000 rpm. - cutter motor power 4 hp - volts. 380/50 - year 2012 - CE Standards

Pneumatic keyway milling machine Hoffmann PU2 for milling dovetail keyways of size W-1/-2/-3/-4 in wooden frames or similar., milling cutter: W-2 (ø 8 mm), length: 750 mm, width: 800 mm, height: 1.500 mm, engine: 1 kW, mass: 119 kg ... mais informação

Kervenfräse (carpentry): The machine is almost as good as new, and there is also a warranty on the machine! Technical data "MAFELL Kervenfräse ZK 115 EC": -) Smoothing depth: 0-83.5 mm ) Milling tool - standard: 150 x 115 mm mm -) Swivelling range: 0-60 ° -) Nominal no-load speed: 4050 1/min -) Rated power: 3000 W ) Weight (with standard milling head): 21.1 kg ) Universal motor: 230 V / 50 Hz Scope of delivery: 1 Kervenfräskopf, complete, Ã? 150 x 115 mm 1 RIP fence 1 spanner 10 mm 1 wrench, Torx T-15 1 connection cable 10 m

Spindle swivel: Yes 0 to 45Â; Height adjustment: manual/handwheel; Swivel adjustment: manual / handwheel; Stop adjustment: manual; Altitude display: Scala; Swivel angle indicator: Scala; Milling stop indicator: Scala; Spindle diameter: 30 mm; Speeds: 3500 / 6500 / 7800 rpm; Motor power: 4 kW; Engine brake: Yes, automatic; Suction connection: 2 x 120 mm; Machine length: approx. 1200 mm; Machine width: approx. 900 mm; Weight: