cepilladoras usadas para la venta

Working width: 510 mm; Planing height: 250 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display of planing thickness: mech. Counter; Feed speed: 8 / 16; Feed roller: steel; Pressure bar: articulated; Pull-out roller: steel; Table rollers: Yes; Motor power: 7 kW; Suction port: 120mm; Machine length: 800mm; Machine width: 900 mm; Weight: 650kg;

working width: 500 mm; cutter head: strip knive; number of blades: 4; surface table length: 2700 mm; adjustment surface table: Hebel; read out: table height; fence tilting: yes; motorpower: 4 kW; motorbrake: yes, automatic; machine length: 2800 mm; machine width: 1000mm; weight: 1050 kg;

Capacity: 230 x 130 mm.Spindles: 7Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kWspindles 2, 3, 4 and 5 are 8000 tr/minstraight jointer on 2nd bottom spindleCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short pieces0,8 m infeed straightening tablemanual bed lubricationSpindle diameter: 50 mm.5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kWmotor height adjustment

WEIBERT WJ-D53 Thickness planer Planing width of 530mm n=5000min 4 knife shaft Tersa n=5000min Planer shaft D=125mm Max. chip removal of 8mm Passage height from 3-300mm Feed speed of 8 and 16 m/min. Motor for feed 1.5 KW (2 HP) Suction nozzle of 160mm Electronic height adjustment of the thickness table with display Machine table, planing shaft bearing block and table guide made of Cast iron! Numerical display of the planing height Long thickness table Motor 5.5KW 400V 50HZ G&WJ-D53

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

Weibert SD 410 Dressing thickness planer new SD 410 incl. spiral knife shaft and comfort package electric height adjustment of the thickness table 4.5KW 400V 50HZ Star Delta Switch Dressing table length 2000mm Thickness table length 860mm (890mm) 4 column guide in the thickness table Planing height 250mm Dressing tables can be folded out in a dual way Dressing stop from 45° to 90° now only for a short time in price with 4-knife shaft The comfort package includes: Digital display of thickness table adjustment 2 feed speeds 6 and 12m/1 Thickness planer table extension Built-in auxiliary stop G&RO-SD410KO-SP Special price: SD 410 incl. spiral knife shaft and comfort package

Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1

Weibert FS32 Dressing thickness planing machine Dressing thickness planer FS32 with spiral knife shaft Weibert FS32 Planer width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 OPTIONS AT EXTRA COST: Slotted hole drilling device Wescott chuck 0-16mm Driving device Dressing table extension adjustable 750mm

SPECIFICATIONS Pre-planer mm: 2000 Number of spindles: 5 Spindle configuration: I below - week 5,5 II - III right- left - KW 7,5 IV above - week 5,5 V below - week 4,0 Cardan shaft Speed-controlled drive KW: 4.0 Spindle diameter mm: 40 Revolutions per minute: 6,000 Max. working width mm: 230 Max. machining height mm: 120 Complete with: - Soundproof cabin - Grooved table -Tools CE-compliant

TERSA planer shaft, table opening to the rear, helical toothed feed roller, noise-insulated, dust-tested---------- Technical data ---------- planing width: 300 mm, table length: 1,500 mm, max. chip removal: 3 mm, diameter planing shaft: 72 mm, number of knives: 3 pieces, swivel range dressing stop: 45, passage height: 230 mm, min. workpiece thickness: 3 mm, min. workpiece length: 300 mm, suction nozzle: 120 mm, weight: 264 kgTOP condition! Workshop-tested & immediately ready for use Quality - Info: - Dressing tables adjusted- Feed and pull-out rollers checked and adjusted- Table guides checked - Complete basic inspection- Complete basic cleaning- Electrics checked - Immediately ready for use

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

-Exhibition machine-new exhibition machine ... más información

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert WJ-D63 Thickness planer Planing width of 630mm 4-reversible knife shaft planing shaft D=125mm Knife shaft speed 5000 min/1 Thickness passage, min/max mm 3 to 300mm Motor planer shaft 9,5 KW 400V 50HZ Motor for electronic height adjustment of the thickness table with digital display Motor for feed 1.5 KW (2 HP) Max. chip removal of 8mm Passage height from 3-300mm Feed speed from 5 to 21 m/min. Suction nozzle of 160mm Machine table, planer shaft bearing block and table guide made of cast iron! External dimensions L=900 W=1120 H=1145 mm Total weight 1100kg G&WJ-D63 Optional spiral planing shaft G&WJ-D63-SPIRAL

JPT-310 Dressing-thickness planing machine Planer width:310mm Planer shaft:3-strip knife Engine Power:230/400V 4.7 HP Passage height:3-225mm G&JET-10000290T  ... más información

SCM Topset XL planing and molding machine for four-sided planing and profiling of wood with CNC-controlled spindles and SCM T-Set quick release nuts., working width: 240 mm, working height: 120 mm, spindles: 7, spindle 1: Bottom / 7.5 kW / 8,300 rpm, spindle 2: Right / 11 kW / 8,300 rpm, spindle 3: Left / 11 kW / 8,300 rpm / CNC, spindle 4: Right / 11 kW / 8,300 rpm / CNC/, spindle 5: Top / 11 kW / 8,300 rpm / CNC, spindle 6: Below / 7.5 kW / 8,300 rpm / CNC), spindle 7: Universal / 7.5 kW / 8,300 rpm, feed: 5,5 kW, control: Control 100 PC Plus, table rollers: Driven table roller in the outlet, spindle diameter: 40 mm

Straightening planer AF 3 E Product name: Planing machine Manufacturer: Julius Lindner & Co. Görlitz Type: AF 3 E Year of construction: 1966 Machine number: 3420 Condition: used, cleaned, completely refurbished and checked! Technical details: • Machine dimensions (L x W x H): 1,480 x 300 x 770 mm • Table size (L x W): 1,480 x 700 mm • Knife shaft speed: 5,400 rpm • Number of knives: 2 • Weight: 400 kg • Suction nozzle diameter: 120 mm Engine data: Voltage: 380 V Power: 1.5 kW Speed: 2,870 rpm The machine has been completely refurbished. The flat belt, the motor circuit breaker, the supply lines and the motor were renewed. Furthermore, a connection for an extraction system was retrofitted. Price: €1,250.00 (EUR) plus VAT ex Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!)

Profimat 22 n 5 spindle  ... más información