cepilladoras usadas para la venta

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW  ... más información

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW  ... más información

Front side planer / automatic planer  ... más información

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SPECIFICATIONS: Max. machining width mm: 110 Table length mm: 2000 Number of knives: 3 Voltage: 380 volts  ... más información

Width 610 mm 4 knives automatic lifting  ... más información

Hofmann C500 Dressing thickness planer Thickness planing width 510mm Planing height 200mm 2 sliding rollers in the lower table 2 feed speeds Surface planer 500mm 2 Knife Shaft Strip Planer Knife Year of manufacture 1980 G&-5099-o0691  ... más información

SPECIFICATIONS: Max. processing height mm: 150 Max. machining width mm: 230 Feed length mm: 2000 Spindle diameter: mm 40 Number of Spindles: 8 (7 + 1 Universal) Voltage: 380 volts Shaft drive Grooved table Spindle configuration: 1 BOTTOM 2 RIGHT 3 LINKS 4 RIGHT 5 TOP 6 Bottom 7 TOP 8 UNIVERSAL SPINDLE

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

2-sided slat planer with optional scoring saw at the bottom Working width: 520 mm Working height: 250 mm Number of working shafts: 2 (option 3) Shaft arrangement: (scoring saw at the bottom) - planing shaft at the bottom - at the top Motor strengths of the planing shafts: 11-15 kW Working height adjustment: motorized Feed speed: 27-130 m/min (reduction possible) Feed motor: 5.5 kW Driven rollers in the table: 3 Top feed rollers: 3 Chip removal at the bottom: 12 mm Chip removal at the top: 15 mm Diameter of the suction nozzles: 160-160 mm Weight: 3500 kg Space requirement: 2300x1600x1700 mm Voltage/Frequency: 380V

Planer-saw combination copper mill DK-14 Year of construction 1982 Working width 605 mm Working height 200 mm Number of spindles 3 Shaft arrangement Hobewelle bottom+top / Saw shaft bottom Spindle speed 6000 rpm Motor power 5.5 - 7.5 - 30 kW Feed speeds 7 - 23 m/min Feed motor 2.2 / 3 kW Driven rollers in table 3 Feed rollers top 4 Yt9k30 Transport rollers in extract 2 Tool head horizontal dia. 126mm, L=610mm Chip removal below 12 mm Chip removal top 20 mm Suction nozzle diameter 140-140-120 mm Weight 3500 kg Space requirement 1500 x 1900 x 1500 mm Voltage / Frequency 380V 50Hz 3Ph Cutting height saw max.: 50mm Saw blade diameter max.: 250mm

Planer WEINIG UNIMAT SUPER 4 – German production – very good condition – year of manufacture 2004 –DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools adjustable top head 1) bottom head 11 kW 6000 U/min 2) top head 18,5 kW 7000 U/min 3) bottom head 5,5 kW 6000 U/min feed motor 2,2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic pressure three upper fixed pulling rollers one rubber top roller corrugated top length of the pre-worktop 1950 mm total power 37 kW central lubrication Trzansport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

- German production - universal head 360" TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 4 kW 3 left spindle 4 kW 4 top spindle 4 kW 5 universal spindle 4 kW electric height adjustment feed on cardan shafts two types of feed speed pre-table top length 2500 mm minimum element length 350 mm connection diameter 140 mm Machine dimensions 450x170x160 cm weight ~ 1400 kg

–DTR – German production – electric adjustment of the left head – adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW 2) right head 3) left head 7.5 kW 4) top head 5.5 kW 5) universal head 360° 5.5 kW feed motor 2.2 kW feed speed 5 – 20 m/min four steel pulling rollers two top rollers pulling rubber one pulling roller in the countertop feed on cardan shafts electric height adjustment length of the pre-worktop 1970 mm central lubrication pneumatic clamps dimensions of the machine (L/W/H) 380 / 200 / 170 cm weight ~ 2000 kg

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

– Italian production – year of manufacture 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal bottom 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2 and 3 spindle) 11 kW 4) horizontal top 230 mm 7.5 kW all spindles up/down, right/left spindle diameter 40 mm from above 3 insertion rollers pulling metal, swivel including 2 double pulling lead shaft from above, double rubber on the side, pressure 1 pc. in the lower table top a rubber pulling roller feed on cardan rollers pneumatic clamps infinitely variable feed speed 5-22 m/min feed motor 1,1 kW electrical setting of planing thickness lifting engine 0,37 kW introductory table length 2470 mm enclosed in the cabin central lubrication of the table top extraction pipe diameters 150 and 180 mm dimensions (L/W/H) 3650 / 1200 / 1600 mm wei ...

– German production – year of production 1995 – right and left spindles with a front milling cutter ensuring parallelism and a right angle of 90° – measurement of the width of the element – electronic width setting TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm control of the width of planing electronic 1 bottom spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (front milling) 4 right spindle 4.2 kW (front milling) 5 top spindle 7.5 kW element width measurement electric height adjustment of feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six steel top rollers one top rubber roller one roller in the working table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm connection diameter 140 mm dimensions of the machine (L/W/H) 456 / 240 / 220 ...

– German production – corrugated top – year of production 1996 – rollers in the countertop pulling TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm corrugated top spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 bottom spindle 7.5 kW smoothly adjustable feed 6-36 m/min feed motor power 5.5 kW six upper steel pulling rollers two top rubber pulling rollers three rollers in the countertop pulling pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of the pre-worktop 1970 mm electric height adjustment central lubrication (split) connection diameter 140 mm dimensions of the machine (L/W/H) 410 / 200 / 180 cm weight ~ 3000 kg

–DTR – German production – electric adjustment of the left head – adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 4 kW 2) right head 3) left head 5.5 kW 4) top head 4 kW 5) universal head 360° 4 kW feed motor 2.2 kW feed speed 5 – 20 m/min four steel pulling rollers two top rollers pulling rubber one pulling roller in the countertop feed on cardan shafts electric height adjustment length of the pre-worktop 1970 mm central lubrication pneumatic clamps dimensions of the machine (L/W/H) 380 / 200 / 170 cm weight ~ 2000 kg

– German production – year of manufacture 1990 – for wet wood TECHNICAL PARAMETERS: planing width max. 310 mm planing height on both sides 300 mm planing height four-sided 100 mm spindle diameter 30 mm shaft motor power 2 x 11 kW spindle motor power 2 x 7.5 kW feed speed 14-86 m/min feed speed adjustable on the variator four upper pulling shafts two lower pulling shafts four rollers in the auxiliary countertop brake minimum element length 600 mm machine dimensions (L/W/H) 290 / 170 / 210 cm weight ~ 3500 kg