cepilladoras usadas para la venta

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800 ... más información

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!  ... más información

Four-sided planer REX HOMS-410 – made in Germany – for wet wood TECHNICAL PARAMETERS: planing width max. 410 mm planing height on both sides 200 mm planing height on four sides 200 mm spindle diameter 40 mm shaft motor power 2 x 11 kW spindle motor power 2 x 5.5 kW feed speed infinitely adjustable feed speed adjustable on the inverter three upper pulling rollers three lower pulling rollers two auxiliary rollers in the table top brake minimum workpiece length 450 mm dimensions of the machine (length/width/height) 250 / 220 / 180 cm weight ~ 3500 kg

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7  ... más información

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment

Specifications/Equipment: Planing width approx. 505 mm Planing height max 250 mm Chip removal max. 8 mm Table length 1,110 mm Electr. Thickness table height adjustment with digital display Thicknessing table guided on 4 spindles Feed speed 7/14 m/min One rubberized feed roller each in the inlet and outlet TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm Motor power 5.5 kW Suction nozzle Ø 160 mm Dimensions: 1,200 x 950 x 1,050 mm Weight approx. 600 kg All information is subject to the actual equipment

Motor power 1.25 kW Power consumption 1.8 kW Shaft speed 6700 rpm Weight 93 kg Connection: 400 V / 50 Hz with integrated filter bag for self-suction  ... más información

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg  ... más información

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Planing width approx. 490/500 mm (at end position dressing stop) Table width 52 cm Table length 2210 mm Tersa planing shaft (4 knives) Motor power 7.5 kW Table height adjustment electric Thickness table guided on 4 spindles 2 feed speeds manual star-delta switch Emergency stop switch Suction nozzle Ø 160 mm Power: 400 V, 50 Hz, 3~, 15.5 A

Specifications/Equipment: - Planing width 504 mm - Chip removal max. 8 mm - electr. Thickness table adjustment - One rubberized transport roller each in the inlet and outlet - Spring-loaded articulated pressure beam in the inlet - 4-knife system planer shaft, 510 mm - Variable feed speed 4-16 m/min - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 7.35 kW - Weight: approx. 650 kg

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Good day! I would like to offer you the following machine: 1 used dresser SCM F 410 - 41 cm planing width - 2.60 m table length - 125 mm knife shaft with 4 knife Centrofix - 4 KW 380 volt motor -Main switch -Circuit breaker - Automatic engine brake - 8 mm chip removal - Joining stop can be swivelled up to 45° - Auxiliary stop - Low-noise design with serrated steel table lips - Suction nozzle 140 mm - Star triangle switch renewed (150,-- € + 19 % VAT) - 4 Leitz-Centrofix knives newly installed (80,-- € + 19 % VAT) - Weight: 750 KG - Price: €4,300,-- + 19% VAT The machine is technically checked, cleaned and adjusted. Cables and plugs available and ready to use. Very good condition. Bank transfer before shipment or cash payment on pick-up. Loading by forklift is not a problem. The machine is sold without an ...

SECOND-HAND 3 SPINDLES MOULDER WEINIG MOD. UNIMAT SUPER 4 - Working width 25-150 MM. - Working thickness 15-50 MM. - Feeding speedy 5/20 M/MIN. - 1st spindle 11 Kw - 2nd spindle 18.5 Kw - 3rd spindle 5.5 Kw  ... más información

SECOND-HAND SURFACE PLANER EXCEL LUCK INDUSTRY MOD. MB50 - CE RULES - mm. 500 - sn 2108301 - year 2021  ... más información

Straightening planer AF 3 E Product name: Planing machine Manufacturer: Julius Lindner & Co. Görlitz Type: AF 3 E Year of construction: 1966 Machine number: 3420 Condition: used, cleaned, completely refurbished and checked! Technical details: • Machine dimensions (L x W x H): 1,480 x 300 x 770 mm • Table size (L x W): 1,480 x 700 mm • Knife shaft speed: 5,400 rpm • Number of knives: 2 • Weight: 400 kg • Suction nozzle diameter: 120 mm Engine data: Voltage: 380 V Power: 1.5 kW Speed: 2,870 rpm The machine has been completely refurbished. The flat belt, the motor circuit breaker, the supply lines and the motor were renewed. Furthermore, a connection for an extraction system was retrofitted. Price: €1,250.00 (EUR) plus VAT ex Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!)

Kölle thickness planer DH 63 Product name: Thickness planer Type: DH 63 Manufacturer: Kölle Machine number: 888 Year of construction: 2000 Condition: used technical details: • Planing width: 630 mm • min. planing height: 4 mm • planing height: 225 mm • Largest chip depth: 8 mm • Length of the thickness table: 1,000 mm • Shortest workpiece length: 260 mm • Diameter of the knife shaft: 125 mm • Speed of the knife shaft: 5,000 rpm • Number of planing knives: 4 pieces • Feed speeds: 4/6/12 m/min • Weight: approx. 1,020 kg • Electronic positioning control e.g. adjustment of the thickness table • Sliding roller in the table Electrical equipment: • Voltage: 400 V • Power knife shaft motor: 7.5 kW • Power feed motor: 0.75 kW • Power motor for thickness table adjustment: 0.18 kW Suction: • Diameter suction nozzle: 160 ...