cepilladoras usadas para la venta

– Italian production – year of manufacture 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal bottom 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2 and 3 spindle) 11 kW 4) horizontal top 230 mm 7.5 kW all spindles up/down, right/left spindle diameter 40 mm from above 3 insertion rollers pulling metal, swivel including 2 double pulling lead shaft from above, double rubber on the side, pressure 1 pc. in the lower table top a rubber pulling roller feed on cardan rollers pneumatic clamps infinitely variable feed speed 5-22 m/min feed motor 1,1 kW electrical setting of planing thickness lifting engine 0,37 kW introductory table length 2470 mm enclosed in the cabin central lubrication of the table top extraction pipe diameters 150 and 180 mm dimensions (L/W/H) 3650 / 1200 / 1600 mm wei ...

Heavy Hochleistungshobelmaschione type Waco 6,000 with 8 spindles. Feed speed 75 m/min up to 600 m / min. Spindles: U/O/RE/LI/U/O/O/U Working height: 17 mm to 120 mm. Max-width 50 mm up to 350 mm. All spindles with Jointer. Machine with feeder table (accelerator) and cross conveyor. Complete switchgear including FU's. Including soundproof cabin! RONDAMAT and washing machine for planing heads. 1 set of tools.

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Specifications/Equipment: - Planing width 504 mm - Chip removal max. 8 mm - electr. Thickness table adjustment - One rubberized transport roller each in the inlet and outlet - Spring-loaded articulated pressure beam in the inlet - 4-knife system planer shaft, 510 mm - Variable feed speed 4-16 m/min - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 7.35 kW - Weight: approx. 650 kg

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder - a set of heads included in the price planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW four upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242  ...

Working width: 410 mm; Planing shaft: strip knife; Number of knives: 4; dressing table length: 2500 mm; Dressing stop angle adjustable: yes 45Â to 90Â; Motor power: 5.5 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2500 mm; Machine width: 750 mm; Weight: 570kg; ... más información

Working width: 510 mmLength of the planing table: 2.250 mmNumber of knives: 4 St.Motor output: 5,5 kWDimensions (L/W/H): 2.427 x 1.340 x 890 mm: Ja weight: 750 kgDust suction hood: 140 mm: Keilleistenmesser The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Thickness planer or Dickte Hofmann D 512 for planing wood and wood-based materials to a desired thickness electrical adjustment., working width: 505 mm, Working height: 305 mm, working height: 305 mm, engine: 5,5 kW ... más información

Heavy four-sided combined calibration milling planing machine with additional scratch saw for relief grooves Still in operation at Franz Kirnbauer KG Hauptstrasse 2 AT-2630 Ternitz Detailed technical description in the PDF document (as an attachment in the photo gallery).  ... más información

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

TECHNICAL DATA: Working width mm: 230 Planing height mm: 150 Infeed table length mm: 2000 Feedrate m/min: 6-24 Rotation speed max rpm: 6000 Number of spindles: 5 Spindle configuration: 01 - Planer wave - 7,5 HP 01 - Right spindles - 10 HP 01 - Spindles left 01 - Spindles top - 10 HP 01 - Bottom spindles - 10 HP Total connection HP: 42,75 Weight Kg: 2400 Feeding magazine

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmfeed: 5-25 m/minCASOLIN MEGA 230/6 four-side planer--------------------------------------------------------6 spindles, with touchscreen controls.Width and height controlled.Spindle arrangement:1. Spindle: below, 40 mm diameter, 6,000 rpm, 5.5 kW2nd spindle: right hand, 40 mm diameter, 6,000 rpm, 11 kW together with3. Spindle: left, 40 mm diameter, 6,000 rpm4. Spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW5. Spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW6. Spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kWMachine without machining tools.The additional screen on the front of the machine is not included in the scope of delivery (belongs to the window system).(technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the sof ...

SCM Topset XL planing and molding machine for four-sided planing and profiling of wood with CNC-controlled spindles and SCM T-Set quick release nuts., working width: 240 mm, working height: 120 mm, spindles: 7, spindle 1: Bottom / 7.5 kW / 8,300 rpm, spindle 2: Right / 11 kW / 8,300 rpm, spindle 3: Left / 11 kW / 8,300 rpm / CNC, spindle 4: Right / 11 kW / 8,300 rpm / CNC/, spindle 5: Top / 11 kW / 8,300 rpm / CNC, spindle 6: Below / 7.5 kW / 8,300 rpm / CNC), spindle 7: Universal / 7.5 kW / 8,300 rpm, feed: 5,5 kW, control: Control 100 PC Plus, table rollers: Driven table roller in the outlet, spindle diameter: 40 mm

All-round automatic planer and moulder Weinig Powermat 500 for four-sided planing, profiling and ripping Folding device and CNC control in excellent original condition. Spindle 1: Bottom / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 2: Right / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 3: Left / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 4: Top / 7.5 kW / HSK Powerlock / 8,000 rpm Spindle 5: Bottom / 15 kW / HSK Powerlock / 4,000 - 12,000 rpm Includes a set of HSK Powerlock tools/adapters, spindles: 5, working width: 230 mm, working height: 120 mm, Dressing table length: 2.000 mm, CNC Control: for spindle 2,3,4,5, Driven role: in the exit table, Control: PowerCom Plus, feed: 3kW / 5 – 30 m/min

-Knife shaft Z4 -in chrome-plated finish -D 200 mm -for machine K133 Condition good, used  ... más información

ready for use m used Pre-dressing table for copper mill planing machines Total length 2600 mm Planing width 240 mm  ... más información

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

WEINIG Unimat 500 – 5 spindles • Planing width max. 230 mm • Planing height max. 120 mm • Feed electronically frequency-controlled 5-30 m/min. • Feed motor 4 KW • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 11 KW • 3rd spindle on the left with electr. Axle adjustment FORWARD – BACK • 4th spindle top 7.5 KW with electr. Axis adjustment HIGH-LOW • 5th spindle bottom 5.5 KW • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatic, high-low controlled • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Driven rubber roller in the run-out table • Electronic digital displays on 1/100 mm • Manual lubricant pump • Central positions of the lubrication points • GR ...

Heavy-duty single-sided planar calibration machine with ROTOLES system for demanding calibration of individual workpieces as well as for processing glulam panels.  ... más información