mandriladoras, centros de usinagem usadas para venda

Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles  ... mais informação

- Exhibition machine -new exhibition machine ... mais informação

SPECIFICATIONS: Size of work table mm: 1000 x 310 Max. groove depth mm: 130 Longitudinal stroke mm: 400 Installed capacity KW: 3.0 Complete with: - 2 vertical pushers - 2 horizontal pushers - 2 workpiece stops  ... mais informação

Hole rowing machine DB 3 - 25 drill bits pitch 32 mm  ... mais informação

Code: 0152 Brand: MASTERWOOD - ITALY Model: TEKNOMAT 2800 - CE Standard CNC machining center for doors and windows - CE standard - Year 2008 Composition: Working table dimensions mm 250 x 4000 - Rear reference stops Anuba hinges inserting and routing unit for machining of any kind of hardware and inserting of anuba hinges - Anuba diameter mm 14 - Milling unit Kw 3,3 - Rpm 1000/18000 - Tilting unit -7 / +90° Vertical routing unit - Motor Kw 3,3 - Rpm 1000/18000 Chisel mortising head - Motor Kw 2,2 - Rpm 2840 Working stroke length mm 3290 Working stroke transversal axis mm 1000 Workpiece clamping vices Numeric control with PC - MW313 - Windows Installed electric power 24 Kw Suction port diameter 200 Compressed air 6/8 bar Overall dimensions of machine : mm 4300 x 2400 x 2700 h - Weight kg 2400 Overall dimensions of electrical cabinet: mm 600 x 1450 x 2200 h - Weig ...

bore capacity in steel (diameter): 40 mmthroat: 315 mmbore stroke: 200 mmtaper MK: 4 speeds: 12: 56-1120 U/minbore capacity in cast iron: 50 mmtable-size: 700 x 450 mmDistance spindle/table max.: 710 mmtotal power requirement: 4/3,43 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,14 x 0,7 x 2,58 mElectric 380 Volt: Thread cutting device: Croll-moving table: Vice: BB 175 mmHeavy gear drill with automatic spindle feed, 2-stage motor, 12 speeds, thread cutting device with Re-Li barrel, height-adjustable drill head and work table. Sliding cross table with locking make Alzmetall Mod. 6000PR, 750 x 420 mm table size, travel x/y = 400 x 200 mm.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0732 Brand: STETON Model: TF - 2 - CE Standard Automatic working centre for window frames (Programmable tenoning/profiling machine) - CE Standard Technical data: Table dimensions mm 1850 x 850 Working table height mm 910 Tenoning carriage - Table mm 880 X 500 - Stroke mm 1100 - Speed m/min 8/12 - N° 2 Pneumatic hold-down cylinders Cut-off saw diameter mm 400 F 30 - Motor Kw 2,2 - Rpm 3000 - Suction mouth diameter 40 mm Tenoning 2 pieces in one operation Vertical spindle diameter mm 50 - Length mm 270 - Spindle stroke mm 210 - Speed rpm 3000/6000 - N° 50 automatic positions - Max tool diameter mm 340 - Motor Kw 7,5 - N° 2 suction ports diameter 120/150 Glazing bead unit - Blade diameter mm 180/200 F 30 - Motor Kw 2,2 - Speed rpm 3000 - Suction mouth diameter mm 80 Automatic feeder Outside profiling of an assembled frame Compressed air 7 bar Overall dimen ...

SCM MORBIDELLI CX100 High-performance compact vertical machining center for drilling wood boards such as chipboard, lacquered board, MDF, extremely suitable for installation in smaller rooms. Safe and reliable, thanks to the upper clamping unit that provides adhesion to the lower reference, ideal for both flexible and series production. Windows operating system. CAD/CAM software for programming and designing any production processes. Automatic detection of piece dimensions and barcode scanner for greater efficiency and production speed. Specifications; Max. workpiece dimensions: 3050 mm x 900 mm x 60 mm Min. workpiece dimensions: 200 mm x 70 mm x 10 mm X and Y axis speed: 40 - 40 m/min Number of vertical drills: 12 (7+5) Number of horizontal drills along the X-axis: 4 Number of horizontal drills along the Y-axis: 2 Electrospindle milling machine: 5.5 kW - 18000 rpm ...

CNC machining center - BIESSE SKIPPER V 31 Working range X 2500 Working range Y 900 Working range Z 70 Main motor kW 4.5 Vertical drilling spindles 10 Machine Table Pass-through Device Special Material Clamping System Toothed Gripper - Vertical working area: yes BIESSE BIESSEWORKS Software BIESSE BH 17 yes Number of electrospindles 1 Number of revolutions max/min 24000 ISO 30 Tool Holder Horizontal drilling spindles in the X axis 4 Horizontal drilling spindles in the Y axis 2 X-direction sawing unit Safety device Enclosed cab CE marked: yes Total connection capacity kW 12 Standby still connected

BIESSE TechnoLogic through-hole drilling machine Drilling on 4 sides  ... mais informação

Hardware drilling and recessing machine, with multi-spindle headTable mountedMotor 1,1 kWFence left and right, 1,5 m. long ... mais informação

drilling machinedrilling lines 7 spindlesMotor 1.1 kWFence left and right 1.5 m. ... mais informação

devel device: yes, 16, 22 25, 32; boring depht: 145 mm; boring length: 240 mm; height adjustment: 135 mm; motor power: 1,5kW; speed: 1500 / 3000 U/min; suction connection: 100 mm; machine length: 1280 mm; machine width: 960 mm; weight: 200 kg;  ... mais informação

Code: 0376 Brand: MASTERWOOD - ITALY Model: TEKNOMAT 3000 - CE Standard CNC working center anuba hinge unit/routing with 7-spindle tool changer for fitting anuba hinges and milling all types of hardware, arched window elements, doors, staircase elements, etc. - CE Standard Technical data : Two fully NC-controlled operating units Anuba hinge unit : loader diameter mm 14/16 - Tilting head -10°/+90° - Max anuba centre distance mm 2950 - Automatic sensor - Drilling motor Hp 2 - Rpm 3600 - Screwdriver motor Hp 1,5 Routing unit: Universal router for milling all types of hardware, arched window elements, doors, staircase elements - High frequency electro spindle 18.000/24.000 rpm Hp 9 - Automatic 7-spindle tool changer - Reach mm 1000 N° 5 tables with n° 6 vacuum suction cups for workpiece clamping X axis speed mt/min 50 Y axis speed mt/min 30 Z-axis speed mt/min 14  ...

Specifications: Workpiece length: min 200 mm Workpiece length: max 3050 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 12 mm (for horizontal machining on the two transverse edges and on the upper edge), Note: When drilling horizontally from the lower edge, central drilling is only permitted up to a workpiece thickness of 19 mm. max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 50 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces. Drill gear V13 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2,800 rpm Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-chan ...

CNC machining center SCM Tech 99 Working area x-y-z: 3000 x 1200 x 200 mm Drilling unit 12 + 6 spindles Sawing unit 0 - 90 degrees rotatable NC Vertical milling unit ISO 30 6.6 kW Additional. Stop working range I = 3780 mm Vacuum pump 100 m³/h Automatic tool changing device TR 7 Control/Control Cabinet PC Control 8.2 TFT-V6A Color Monitor Software XILOG TELE SOLVE - Service Safety device with bumper and protective grille CE version TV work table with cushions Electrospindle renewed in 2023 Machine is NOT ready for operation - control system defective Ex location NET € 5.900,00

5 axis CNC Wood Machining Center Table size 3280x1580 mm X,Y,Z axis speeds 80,60,20 mm/min Software Bsolid  ... mais informação

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

SCM drilling machine model TOP29: - 29-spindle head with quick coupling - Adjustable drilling 0-90° from upper vertical to horizontal - Motorized movement of the drilling head - 6-position drilling depth revolver - 4 pneumatic clamps to hold the pieces - complete with aluminium rails AVAILABILITY FROM APRIL 2024