mandriladoras, centros de usinagem usadas para venda

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW  ... mais informação

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Machine double-sided row drilling machine 2 drill motors 1.8 kW with oil brake cylinder Stroke max. 130 mm with pneumatic reversing valve 21 spindles, spindle pitch 32 mm Drilling distance max. 640 mm (by moving the Bkhqffww workpiece max. 2656 mm) Portal passage 850 mm Air verbatcu at 5 atm approx. 11 l per cycle Suction nozzle 160 mm Machine dimensions approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Location: 97478 Hainert

Technical Details: - X axis working area: 3130 mm - Y axis working area: 1250 mm - Working Table Pod and Rail - Main Electrospindle power: 9 KW - Number of controlled axes: 4 axes - Total number of drilling spindles: 12 - Total number of tool changer positions: 8  ... mais informação

SPECIFICATIONS: Table dimension mm: 1600 x 500 Number of spindles: 21 + 3 (accessory head) Wheelbase between each spindle mm: 32 Max. drilling depth mm: 90 2 workpiece clamps Installed capacity: Hp 2.5 Pneumatic tilting device of the unit from above to the horizontal  ... mais informação

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

We are happy to offer: 1 used and VERY well maintained HUNDEGGER SC 3 with full equipment. From 2016 200 mm version. TOP 1 a condition. Year of construction 2016 Available approx. Oct. - Nov. 2024 Technical equipment on request The entire system is insured against fire, storms, etc. until the day of dismantling. Full functionality is guaranteed in writing until the day of dismantling. In order to purchase the machine, a deposit of 70% of the sales price plus VAT must be made. The remaining payment is made exactly 6 weeks before the set dismantling date. The machine is sold as is from the Germany location without warranty. The machine can be viewed during operation after a written appointment has been made. The purchase price includes the removal of all anchors such as welding seams, air, electricity and loading using a mobile crane, but not the pure dismantling of ...

CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)

Recording ISO 30 Connection BIESSE and possibly MASTERWOOD Ratio: approx. 1 : 0.7 Saw blade holder 35 mm, with side hole approx. 6 mm on pitch circle 50 mm Max. saw blade diameter approx. 165 mm BIESSE No: 9405A056  ... mais informação

Connection HSK F63 IMA Ratio 1:1 max. speed 12,000 rpm Cutter holder for collet ER 25 Saw blade holder bore 30 mm Swivel infinitely adjustable 0 – 90 degrees with fixed points at 0, 22.5 and 45 degrees  ... mais informação

Connection IMA – HSK 63F Gear ratio 1:1 Max. speed 14,000 rpm Bore for saw blades or disc cutters 22 mm Tactile diameter. inside approx. 130 mm Note: Plastic coating probe ring is missing Sensing distance approx. 5 mm  ... mais informação

I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.  ... mais informação

BIESSE ROVER K FT machining center Manufacturer: BIESSE Model: ROVER K FT Year of production 2017 Additional information: Electrospindle: 1 pc. Main engine: 9 kW Tool magazine: 14 positions Vertical drills: 10 pcs. Machine table: raster Software: BIESSE B_SOLID Number of revolutions: max. 24,000 rpm Handles: HSK-F63 The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos.

Technical Details: - X axis working area: 5300 mm - Y axis working area: 1300 mm - Working Table Pod and Rail - Main Electrospindle power: 9 KW - Number of controlled axes: 5 axes - Total number of drilling spindles: 32 - Total number of tool changer positions: 8  ... mais informação

Technical Details: - X axis working area: 3050 mm - Y axis working area: 1250 mm - Main Electrospindle power: 10 KW - Number of controlled axes: 3 axes - Total number of drilling spindles: 25 - Total number of tool changer positions: 4  ... mais informação

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V  ... mais informação

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2