subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 207)
Working width: 1300mm, roller diameter: 185mm, max. opening height: 100mm, working height: 800mm, power: 0.37kW. ... mais informação
Code: 0317 Brand: OSAMA Model: S4R/1300 - CE Standard Automatic 4-roller gluing machine for wood panels, laminates, technical panels, foam, soundproofing, plasterboard, parquet, doors, suitable for uniform gluing of many types of fluid adhesives such as urea-formaldehyde, resorcinol, melamine, phenolic resin, polyvinyl, epoxy adhesives etc. - CE Standard Technical data: Automatic washer for perfect roller cleaning Uniform and constant spreadin throughout the working length Working width mm 1300 Working height mm 100 Spreading rollers diameter mm 210 Feed speed 20 mt/min Motor power Hp 1 Overall dimensions mm 2100 x 1000 x 1450 h Weight kg 700
Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg
Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  ,edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg
Description: serial number AH00004898 track feed speed 11 m/min panel thickness 8-60 mm thickness of edges in strips 0,3-6mm thickness of rolled edges 0,3-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm exceeding material to the panel thickness 2+2 distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) 90 mm opening for panel support roller 500 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document PDF - OLIMPIC K 360 HP.pdf  ,serial number: AH00004898, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,300 x 1,800 mm, weight approx.: 1,400 kg
Description: serial number AH00004035 variable track feed speed 12-18m/min panel thickness 8-60 mm thickness of edges in strips 0,4-8 mm thickness of rolled edges 0,4-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) (with unit adjustment modification) 60 mm opening for panel support roller 560 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document ,PDF - OLIMPIC K 560 R PS 7.pdfserial number: AH00004035, Approx. Onsite Dimension. (l x w x h): 5,000 x 1,300 x 1,900 mm, weight approx.: 1,900 kg
Description: HOLZ-HER LUMINA 1380 Edgebander Feed rate: 10 - 18 m/min Operating dimensions Minimum workpiece length: 160 mm Minimum workpiece width: 60 mm Workpiece thickness: 8 - 60 mm Edging thickness: 0.4 - 8 (15) mmApprox. Onsite Dimension. (l x w x h): 5,740 x 1,200 x 2,100 mm, weight approx.: 2,000 kg, Serial Number of Manufacturer: 289/1-907
Description: IMA ADVANTAGE 4612 Edgebander Motor data: 380 V - 50 Hz - 15 Kw - 37 A Suction nozzle: 120 mm Pre-wired for Pre-milling Unit Space Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 45 mm Edge material height: 14 - 55 mm End trimming unit Rough Milling unit MFA Milling Unit (Fine Milling + Corner Rounding) Profile Scraper + Flat Scraper + Buffing unit Feed approx.: 12 m/min Compressed air approx.: 7 bar serial number: 02305, edge thickness: 0,4 - 12 mm, workpiece thickness: 50 mm, feed: 12 m/min, control: IMA 1101, Approx. Onsite Dimension. (l x w x h): 6,100 x 1,800 x 2,000 mm, weight approx.: 3,100 kg
Description: HOMAG KL 76/A20 Edge Bander (incomplete)Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg ... mais informação
Description: Edgebander with tilting unit. For edgebanding doors, with the following groups: Entrance guides with SIKOR counters Joint trimming unit regulated by SIKORS Gluing unit with electronic positioning cartridges Snipping unit with 2 motors Fixed fine trimming unit Tilting fine trimming unit Profile Scraping unit Profile trimming unit with 1 motor Scraping unit Cleaning brushes unit Joint triming unit for grooving 0-90º Sanding unit NOTE: The return system is not included The heater does not work. serial number: 105/0-212, packing measure approx (l x w x h): 1,200 x 2,000 x 2,000 mm, Approx. Onsite Dimension. (l x w x h): 1,200 x 2,000 x 2,000 mm, weight approx.: 4,000 kg
Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg
Description: Spindle moulder group in input Glue group End trimming group Straight trimming group Inclined trimming group Profile group 1 motor , NOTES: Electronic machine and the PLC does not workserial number: 365/0-602 5005052, Approx. Onsite Dimension. (l x w x h): 10,200 x 1,800 x 1,900 mm, weight approx.: 2,500 kg
Description: Vertical panel saw Working dimensions: 3300x1900 Max. thickness: 65 mm Motor power: 3 kw Machine with disc and scoring blade Approx. Onsite Dimension. (l x w x h): 4,000 x 1,000 x 2,400 mm, weight approx.: 1,500 kg ... mais informação
IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition ... mais informação
Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg
gluing unit: yes, snipping unit: yes, rough trimming unit: yes, fine trimming unit: yes, flat scraping unit: yes, edge buffing unit: yes, Approx. Onsite Dimension. (l x w x h): 5,000 x 900 x 1,400 mm, weight approx.: 1,200 kg ... mais informação
Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the des ...
Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , serial number: 201011RX0 ...
Description: Curved edging machine. Power: 3.53kw ,  ,serial number: 130,201, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,800 x 1,300 mm, weight approx.: 950 kg ... mais informação
Description: Semi-automatic edge bander for straight, round and shaped panels shear device and roll-holder plate for the application of rolled edges with 3 mm max. thickness serial number: 193,150, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,700 x 1,300 mm, weight approx.: 900 kg ... mais informação