espalhadores de cola usadas para venda

 ... mais informação

Machine line Combiform / single-sided edge banding machine, consisting of: Feeding by means of 1 lifting table, 1 one-sided edge banding machine IMA, type: Combi-Form/K/I/R75/885/V/vR3, year of construction: 1997, comp. no.: 15018, with 3 conveyor belts, partly as a waste inclined conveyor belt, 1 brushing unit WANDRESS, type: BIQ 46/1/2200, year of construction: 2007, no.: 070838, 1 output roller conveyor SYSTEMATIC, type: AR-2, year of construction: 1997, machine no.: 97.052

SED edge banding machine, consisting of: 1 loading roller conveyor with tine pick-ups for forklift loading, 1 automatic rail transverse carriage QVW 38, 2 loading boxes, with lift tables and stacking portal or gantry loader WAMHOFF, type: Robomat-M-II-B, year of construction: 2001, machine no.: 111.10, 1 double-sided edge banding machine IMA WEHRMANN, type: Combima/FC/K/II/1410/V/VR/R/S02, year of construction: Ü99, machine no. 249/262, with marking spray unit REA JET HR, 1 brushing unit WANDRESS with humidification, 1 rotary cone station VENJAKOB, type: VDK/M, year of construction: 1999, machine no.: A99 09 001, with control WEHRMANN Micromat, 1 double-sided edge banding machine IMA, type: Combima/K/II/885/F/SR, year of construction: 1981 / Ü1999, machine no.: 149/268, 1 automatic drilling machine BIESSE, type: Techno FDT, year of construction: 2004, serial no.: 44258, weight: 5,890 k ...

Wemhöner press, consisting of: 1 loading roller conveyor with tine pick-ups for forklift loading, 1 stacking portal with lifting platform embedded in the floor, 1 HELMUT FRIZ dust collector, 1 OMMA glue applicator, type: NSC.1600, year of construction: 1992, serial no. 4185, 1 foil laminator HELMUT FRIZ, nameplate not traceable, 1 belt and buffer line with cutting device, as station, 1 foil press WEMHÖNER, type: VS003/1086, machine no.: 9600377, operating pressure: 320 atm, pressing pressure: max. 1,086 tons, 1 double trimming line WAMHOFF, with brushing unit WANDRESS, machine no. 10 05 14, 1 BÜTER lift table embedded in the floor, 2,800 kg, with acceptance roller conveyor ALTEK, year of construction: 2013, factory no. 20.15.0913

 ... mais informação

Zig - Zag Veneer Splicing Machine Kuper Type: FW-Pimus (special model) Year of construction 2008 Nominal current 4 A Voltage: 230 V Specifications: Stand projection: 920 mm Working height: 950 mm Veneer thickness: approx. 0.4 to 2.0 mm (also thick veneer) Feed in 3 stages: approx. 10 to 23 m/min 3 K heating system. The new temperature control ensures optimal melting results of the adhesive thread and thus ensures a perfect connection. Discus discs with tolerance compensation mechanism Electrically controlled thread tear-off roller new heating system with standstill control Frequency converter controlled drive Space requirement: approx. 1,400 x 560 x 1,470 mm Incl. accessories

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 50mm; Workpiece width: minimum 110mm; Glue basins: granules, quick-change basins; Cross-cut scissors: yes; Caps / flush sawing: yes ; Milling Station: Bevel / Radius; Corner copying: yes; Flat - Scraper: Yes; Radius Scraper: Yes; Schwabbel: Yes; Anti-Adhesive Spray Unit: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 3314 mm; Machine width: 1085 mm; Weight: 545 kg; Convenient and simple control of all important functions via control panel at the frontExcellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reductionPrecise and proven units enable optimum machining and perfect finishing of the edgePre-milling unit equipped with two slide milling cuttersHigh-fr ...

pre milling unit: yes; edge thickness: max 3mm; workpiece thickness: 8mm - 50mm; workpiece width: min.110mm; glue system: granulat, quick-change glue pool; cutting knife: yes; cutting saw: yes; milling station: chamfer / radius; corner copy unit: yes; flat scrapper: yes; radius scrapper: yes; buffing unit: yes; anti-adhesive spraying unit: yes; inlet ruler adjustment: manual; workpiece thickness adjustment: manual; motor power: 5 kW; machine length: 3314 mm; machine width: 1085 mm; weight: 545 kg; Convenient and easy control of all important functions via control panel on the frontExcellent accessibility to the working units thanks to large hood, which provides additional protection and noise reduction.Precise and proven units enables optimum machining and perfect edge finishingJoining unit equipped with two slide cutters High-frequency motors for edge processing Stan ...

single-sided CNC edge processing machine, manufacturer: OTT, type: Storm+, year of manufacture: 2017, serial no.: H/321 75, connected loads: 24 kW / 400 V / 42 A / 50 Hz, CNC control BECKHOFF, touch screen, automatic return unit OTT Translift+, year of manufacture: 2017, no.: TS/81075, belt conveyor, return belt conveyor belt FOURTEC SFB 90/110, conveying speed: 40 m/min, 1 roller conveyor at working height approx. 300 cm, various roller conveyors, mobile edge magazine, various cabinets with accessories, Hot Melt Gluing Unit OTT 40456C01V2, Year of manufacture: 2016, No.: CMS/207, 5.9 kW

Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... mais informação

Compact and mobile edge banding machine Bi-Matic 4.5 Starter Plus for gluing and processing edge material Including extensive supplies of glue and edge material., Aggregate: 4, Aggregate 1: Caps, Aggregate 2: Round, Aggregate 3: Pulling blade, Aggregate 4: Babble ... mais informação

Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.

Pneumatic gun, 2 component gun, multifunctional gun, cartridge gun, pneumatic cartridge gun, pneumatic cartridge gun, cartridge press-Manufacturer: Festo, pneumatic cartridge gun-Cartridge length: 212 to 218 mm-Cartridge diameter: 45 to 50 mm-Inlet pressure: max. 10 bar-Accessories: see photos-Box dimensions: 600/260/H100 mm-Weight: 2.5 kg

Edge banding machine Felder G480 The following units are available: Cutting, joining, flush milling, corner rounding, scraper blades, surface scraping blades Year of construction 2016 The machine is in top condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well  ...

Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm PLC Screen Control Edgecontrol Motorized, positioning-controlled bridge height adjustment Pre-milling unit for fastening upstream of the gluing station Fully automatic edge magazine for rolls and strips Glue application station cartridges + PU gluing Car. Glue height adjustment / tactile nozzle Printed plant 1913 pneum. Cross-cut unit for rolls and strips 1918 - 15 mm with pneumatic changeover of 0-10° incline of the cross-cut saws Multifunctional milling unit with mot. Adjustment: Flush milling - 15 mm, radii and bevel milling -15° Frommilling unit - corner rounds 1833 Scraper unit for chamfers and radii 1929 pneum. pneumatic indentation and disengagement Surface Scraper Unit - Finish pneum. Buffing unit for replastering and edge polishing with 2 textile discs HIGH-END spraying device Compl ...

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 45mm; Workpiece width: minimum 90mm; Glue basins: Granulate alternating basins; Cross-cut scissors: yes; Caps / flush sawing: yes with corner round function; Milling Station: Bevel / Radius; Flat - Scraper: Yes; Radius Blade: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 2300 mm; Machine width: 1020 mm; Weight: 420 kg;

Single-sided edge banding machine Brandt type OPTIMAT KDF 650 C edition Specifications: • Feed rate (m/min.): 8 - 18 • Feed max. with form milling machine (m/min.): 14 • Working height (mm): 950 • Pneumatic connection (bar): min. 6 • Overall length (mm): 6,060 Workpiece and edge parameters: • Workpiece width min. at workpiece thickness 8 - 22 mm: 70 mm (depending on workpiece length) • Workpiece width min. for workpiece thickness 23 - 40 mm: 120 mm (depending on workpiece length) • Workpiece width min. at workpiece thickness 41 - 60 mm: 150 mm (depending on workpiece length) • Workpiece protrusion (mm): 38 • Workpiece thickness (mm): 8 - 60 • Edge height max. = workpiece height (mm): + 6 • Edge Material Roll (mm): 0.4 - 3 • Max. edge cross-section for PVC: 135 mm² • Max. edge cross-section for veneer: 100 mm² • Roll diameter max. ( ...

I am selling a fully equipped edge banding machine HOMAG EDGETEQ S-500 KAL370 Ambition 2484, built in 2019: Configuration: Input stop servo-motor adjustable Manually adjustable joint milling Edge banding with preheating tanks 2 pcs. Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling top + bottom pneumatically adjustable Round unit 4-motor servo motor adjustable R2 / second set R1 included Swivel groove saw unit Radius scraper blade Multiradius servo motor adjustable Scraper blade surface can be pneumatically adjusted Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 8-60mm Edge material thickness 0.4-12 (20)mm Feed speed 16 to 25m/min. Overall length including feed plate 8365mm Mileage status 833,000 meters. Input appar ...

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...