espalhadores de cola usadas para venda

Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480

Type FZ-515 Thickness of panel 10-60 mm Edging thickness 0,4-3 mm Feeding speed 15 m/min Air pressure 0,8 MPa Total install power 6,5 kW Panel width ? 60mm Transport dimensions 3700x900x1700 mm Weight 1200 kg  ... mais informação

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg  ... mais informação

Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.  ... mais informação

Edge magazine for edge banders-Spaces for edges: 5 pieces-Max. Edge width: 60 mm-freestanding-Dimensions: 900/530/H1030 mm-Weight: 208 kg ... mais informação

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,  ... mais informação

Description: Working Area  ,: 1750 x 350 mm Belt feed: Ø 600 mm Extensible table til 400 mm approx ,  ,  ,  ,feed: 5.5 m/min, gluing unit: yes, return system: no, total power approx: 3 kW, Approx. Onsite Dimension. (l x w x h): 1,750 x 1,000 x 1,350 mm, weight approx.: 135 kg ... mais informação

Description:  , Serial number: 1157/0902 Feeder  ,1806 Plate diameter: 800mm Edge length: min 350 Thickness: 3 mm Max. height: 51 mm Gluing unit 1906 Workpiece thickness: 6-60 mm Workpiece length: 140 - 4000 mm Hot-melt cartridge : Diameter 60x80 mm Pressure unit 1912 Edge thickness: 3 mm Edge height: 51 mm Workpiece feed rate max. 11 m/min Big roller: 240 N Small roller: 80 N End trimming unit  ,1822 Edge section: 3x51 mm Edge excess: 200 mm Feed speed: 8 m/min Workpiece length: 140 mm Workpiece thickness: 45 mm Gap: 45 mm Workpiece spacing: 600 mm Turning range: 0-10°. Motor power: 0.22kw Revolutions per minute: 9000 min-1 Milling unit: 1825 Motor power:2x0.6kw Revolutions: 18000 min-1 Air consumption: 300 m3/h Edge scraper unit: 1964Approx. Onsite Dimension. (l x w x h): 3,060 x 950 x 1,500 mm, weight approx.: 900 kg

Description: Serial Number: 4418 For preglued edges Automatic feeding of the edge Total power 3.30 kw Worpiece thickness: min 11 mm - max. 65 mm Feed speed 4.50 m/min Snipping unit Rough trimming unit  ,serial number: 4,418, Approx. Onsite Dimension. (l x w x h): 1,720 x 950 x 1,300 mm, weight approx.: 200 kg

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Description: CEHISA EP-2 Manual edgebander Serial number 1770 Maximum gluing height: 60 mm Workpiece thickness from 10 mm up to 50 mm It does not have a shear to cut the edge ! Hot melt glueing unit Adjustable temperature from 50 to 300º Motor power: 0.25 HP Three-phase connection With wheels for easy transport  ,serial number: 1,770, Approx. Onsite Dimension. (l x w x h): 1,040 x 820 x 950 mm, weight approx.: 100 kg, Serial Number of Manufacturer: 1,770

Flat scraper IMA Type: 08.50 Price on request  ... mais informação

Manufacturer: Italpress, Type: Program 30, Working widht max mm: 3000, Working width min min mm: 1800, Hydraulical/pneumatical: hydraulisch 3 PS, Wight approx. kg: 1800,  ... mais informação

Frequency converters, frequency converters, drive converters, controllers, variable speed drives-Input: 380/440 V 3.7 kW-Frequency: 50/60 Hz-Power: 3.7 kW-Weight: 3.3 kg ... mais informação

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 3.2 kW -Output: 165 V 300 Hz -Power: 4 KVA -for edgebander, edgebander -Weight: 105 kg ... mais informação

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 4.2 kW -Output: 133 V 200 Hz -Power: 6 KVA -for: edgebander edgebander -Weight: 115 kg ... mais informação

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 5.5 kW -Output: 133 V 200 Hz -Power: 7.5 KVA -for: edgebander edgebander -Weight: 105 kg ... mais informação

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 4 kW -Output: 380 V 100 Hz -Power: 8 KVA -for edgebander, edgebander -Weight: 120 kg ... mais informação

4 Roller Glue Applicator Make Friz Working width approx. 2600 mm 4 Roller Glue Applicator 2 rubberized rollers 2 steel rollers  ... mais informação

GLUE APPLICATOR Working width: 1400 mm 2 rollers, glue application on one side. Speed 0-50 m 2.2 m² Xsokevn Maximum adhesive thickness 65 mm Reel: Rubber: 200 mm Metal: 150 mm Cleaning program Dimensions: length 230 cm, width 140 cm, height 170 cm; weight approx. 800 kg  ... mais informação