subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 209)
Torwegge H293 is a special machine. The panel length of the machine is 2.65 m. – the panel width is 10 m.- the panel thickness is from 10mm to 50mm. ... más información
Radial fan, chip extractor, fan, suction, chip fan -Centrifugal fan in a galvanized housing, soundproofing -Motor power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Connection input: Ø 800 mm -Connection output: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg
Manufacturer: Piller, Type: RG 11 Vakuumturbine, Year: ca.1990, Diameter intake mm: Kw 4,75, Engine power kW: Drehzahl 7000, Flow rate approx. m3/h: war verbaut in schleifmaschine, rotations rpm: 0,42 m³/s , Direkt drive: Druckgussgehäuse, V-belt drive motor: Saugseite 100 mm, V-belt pulley impeller: Austritt 100 mm Durchmesser, Year :ca.1990
New hydraulic station, renewed electric cabinet, many new and renewed parts. Machine is sold by the customer. Location in Lithuania ... más información
Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call) ... más información
Vecoplan wood shredder for waste wood Inlet cross-section 1300 x 1400 mm Feed capacity per hour 500 to 2000 kg Weight approx. 1900 kg Drive 37 kW ... más información
Marking - Station with discharge and attached roller-tube Length: 4700 mm Total height: 2000 mm ... más información
Buhler Pellet Mill Pelleting Machines 420 pellet mill feeding and conditioning 110 kw ... más información
For sale two (2) maschines made by Pallmann, one 132 and second 200kw for processing chipwood till saw dust in wet condition (this maschine has rottary kniwes moving on left side and sieve moving opposite and make super results. Price: 132kw = 20.000 EUR Price: 200kw = 39,000 EUR ... más información
Manufacturer: Ilcam Kantenbearbeitung, Year: ca.1990, Monting of the machine: Verleimteil/Kappen/Vorfräsen/Zieklinge, Min-max edge material mm: 0,5-12, Work piece width min-max mm: 65, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 10-20, Premilling: no, Fine milling: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Year :ca.1990
Radial fan, chip extractor, fan, suction, chip fan -Motor power: 75 kW -Speed: 1480 rpm -Volume flow: approx. 40,000 m³/h -Total pressure: approx. 1600 Pa -Connection input: Ø 710 mm -Connection output: Ø 710 mm -Dimensions: 2400/1560/H2810 mm -Weight: approx. 1600 kg ... más información
plate thickness: 4 mmblade length: 200 mmTable dimensions: 1200x780 mmweight of the machine ca.: 1200 kgfrequency: 50 HzThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x
Sorting conveyor with 13 electric off boxers for round wood to wood length 5, 5 m. Complete with drive unit and deflection. Hydraulic chain tensioning. 13 log kickers sorting conveyor with electrical for log length up to 5, 5 m. Including eletric hydraulic chain tensioner, driving station. ... más información
Chopper Fabr. Ackermann Type HB 900/220 YOC 1991 with slider ... más información
Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991
Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991
Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991 ... más información
Manufacturer: IMA, Type: AVM/K/I/G 80/822/SR/ L 20, Year: 1991, Min-max edge material mm: 3-15, Work piece width min-max mm: 80, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 50, Min-max feed m/min: 18, Finished product: Leistenmaschine, Premilling: yes, Fine milling: yes, Coil magazine: yes, Min.-max. batten magazine mm: 3-15, Mitre stations: yes, Pre-milling: yes, Top pressure belt/roller: Rolle, Kantenschleifen gerade: yes, Kantenschleifenradius: 2, Werkstückunterstützung: yes, Compressed air bar: 6, Machine lenght mm: 11000, Year :1991