outras máquinas para plástico usadas para venda

Used HP4200 MultiJetFusion 3D printer in good condition for sale, Equipment:, 1 piece Processing stations, 2 pcs. Build Units ... mais informação

Comexi solvent-free laminating system Coating width = 1320 mm , Speed = 350 m/min, With 2 unwinders (turnstile) With 1 rewinder (turnstile) With Doypag vario mixer. Mixing plant 4 heaters Pre-treatment AFS corona type. G 60 S,  ... mais informação

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30 ... mais informação

The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.

Maszyna Maklaus model Res-Uni SPECIFICATIONS: Max. rewinding speed 1500 meters per minute Cycle production time 17-21 seconds (for 250 meter rolls) Max. diameter of mother roll 550 mm Max. material width 600 mm Min. material width 450 mm Max. diameter of finished roll 300 mm Mother roll core diameter 76 mm Inside diameter of finished roll 50 mm (30mm, 32mm, 38mm, 42mm, 76mm optional) Material thickness 10 micron - 50 micron Installed power 14 Kw Voltage 400 V Air pressure 6 bar Compressed air consumption < 100 liter per minute Machine overall dimensions 1350x1800x2200 mm Machine weight 1250 Kg STANDARD FEATURES INCLUDE: ● Two Servo Drive microprocessor controls ● On - board computer controls ● Touchscreen Operator Interface in operator language ● Electronic rewinding tension control ● Integrated command pulpit ● Pneumatic device for the Lifting of Mothe ...

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994  ... mais informação

This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes

Roland EGX-350 engraving machine, perfectly packed, almost unused. ... mais informação

Year: 2009 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... mais informação

Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... mais informação

Used Farsoon HT403P-H (high cylinder version) with 1x 100 watt CO2 laser for sale. The machine only took 146 hours to build and is equipped with an HT option for a maximum of 220°C. Includes cooler, cleaning and sieving unit and various accessories for mixing. ... mais informação

Film buffer silo: 10000 litres, geared motor: 2.2 KW (3 hp). With remover.  ... mais informação

For Wood, Plastic, Kitchens, Windows, Doors, Loading Furniture, construction, etc VAT not deductible.  ... mais informação

Conveyor belt Length: 6 m Width: 0.58 m. Legs with wheels. Reference: GT-4618 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

Line for extrusion of XPS polystyrene foam boards with ultra-low density 20 kg/m3 and compressive strength 250-300 kp using technology patented in Ukraine with a set of additional innovative devices. Board parameters: width up to 1200 mm, thickness up to 200 mm, length is not limited. Extruder 180/235mm L/D 28-40 manufactured by the Korean company MYUNG-IL FOAMTEC Foaming gases - CO₂, DME, HFC, HFO, propane-butane, isobutane. Pumping equipment set Capacity up to 50m3/h (1000kg/h) Weight – 60t. Line length -90m, width 6m. Power consumption – 650 kW The extruders operated for a year and a half after the plant was sold to another owner, and the rest of the time the line was in storage.

Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table  ... mais informação

Year: 2000 - technically efficient, ready to work - after full service - manual feed - pneumatic profile clamping  ... mais informação

I would like to offer the UHG 500 Easy vacuum chamber. It was purchased in 2018 at a price of €24,980, has been in operation for a total of 510 hours and is in very good condition. In addition to two Memmert ovens (see attachment), the vacuum chamber also includes a handling table with a load capacity of 1,000 kg, a new silicone mixing attachment (for a drill). We will give the chamber a set of spare funnels, inserts, tubes, dividers, cups and anything else we can find for it. We are getting rid of the chamber due to the specialization of our company in 3D printing using stereolithography, due to capacity reasons it is no longer important for us to do vacuum casting as well. The buyer must arrange the transport, there is a loading ramp available.

Stratasys FORTUS 900mc 3D printer YOM 2015, USA Computer Numerical Control (CNC)- Brand: Touchworks Technology: Fused Filament Fabrication (FFF) Materials: Thermoplastics. Polymers/Thermoplastics: PLA, Polyesters, Polyamides, Polycarbonates, Styrenes: ABS, ASA, Polysulfones, Polyaryletherketone, Polyimides Two vials for main material 1508 cc Two vials for fixing material 1508 cc Automatic switching from one vial to another Feedstock format: Filament 95% rate of yield Total Installed Capacity: 7,5 kW Working volume (XYZ): 914.4 x 609.6 x 914.4 mm Details up to 200 kg Build volume 508.756164 L Min. layer thickness 0.51 mm X/Y accuracy: +/- .089 mm or +/- .0015 mm per mm, whichever is greater. Z part accuracy includes an additional tolerance of -0.000/+ slice height. Note: accuracy is geometry-dependent. The vacuum board is adapted for use with two sizes of construction s ...