outras máquinas para plástico usadas para venda

FOIL SEALING MACHINE type TS 1000 C-2 Year of Build 1980, Machine No: 1748, for the production of bags made of suitable Polyethylene and polypropylene films Product: Tren suture bag Processing: single-lane or dual-use printed two-lane unprinted Working width: max. 1000 mm Section lengths: 80 - 600 mm Film thicknesses: 2 x 0.015 - 0.100 mm depending on the welding wedge design Working cycles (mech.): max. 150/min. depending on film thickness, type of film, film quality and Section length Film web speed: max. 35 m/min Power consumption: 4 KVA Nominal voltage: 380 V Nominal frequency: 50 Hz Control voltage: 220 V Cooling water consumption: approx. 42 l/h Paint: light grey according to RAL 7030

Horizontal Centrifuge For Sale Brand: Refakt Model No.: Trockner T1001 Length: 1200 mm Diameter: 500 mm Engine: 22 kW (30 hp) at 3000 rpm Year: 1993 For more details or to make an enquiry, please contact us.  ... mais informação

Hydraulic Shear (Guillotine) for sale Brand: Gester Model No.: TN-60 Cutting Chamber: 1200x1000 mm Engine: 11 kW (15 hp) For more details or to make an enquiry, please contact us.  ... mais informação

Vibrating Screen Circular Sieve For Sale Brand: Filtra Model No.: IVR15 Material: Stainless Steel Year: 2004 Sieve: 1500 mm diameter For 3 sizes For more details or to make an enquiry, please contact us.  ... mais informação

Hydraulic Baling Press for Sale Brand: Presto With automatic tying Engine: 7.5 kW (10 hp) Feed Mouth: 1000x750 mm Bullet Measurements: 1.2 x 0.70 x 0.65 m External dimensions of the machine: 3.8 x 2.10 x 2.55 m (height) For more details or to make an enquiry, please contact us.  ... mais informação

EPS Crushing & Melting Machine For Sale Brand: Best Machine Industry Model No.: BF-HM Power: 2.57 kW (3.5 hp) Feed Mouth: 380x300 mm For more details or to make an enquiry, please contact us.  ... mais informação

Cutting machine from roll to sheet. Technical details Model: FMHZ-400A Power voltage: 220V / 1.2 kw Cutting length: 0.1----- 9999.9mm Cutting width: 0.1 -----400mm Cutting speed: 36m/minute max. Cutter material： SKD11 Bearing: Imported SOO6Z Panel material: Stainless steel Feed roller: PUR, 48mm diameter, plastic hardness upper 35° and lower 75° Cutter motor: Reducer motor 250W Feeding motor： Stepping closed loop motor (high accuracy and less error) Rear feeding motor: speed regulating motor Double pull rod cutting mode Spring gear simple brake Feeding bearing: ≤130KG Unwinding diameter: 40≤OD≤1000mm Weight: around 200KGS Dimension: 2850(L ) x 980(W ) x 10500 mm(H) Machine is as good as new. China Flyingman. It can be seen running and tested any time. Attached some photos and video.

On behalf of a customer, we are selling an HP4200 MultiJetFusion machine with a maintenance contract valid until July 20, 2024. The machine was sold to the customer by HP as a new machine in 2021. The material used is PA12 (HP 3D High Reusability PA 12). The machine was used very little (approx. once a month)., Scope of delivery:, - 1 pc. HP 4200 (commissioning 2021), - 1 pc. processing station, - 2 pcs. Build Unit

Side seal bag machine for carrier bags with glued-in grip hole reinforcement (patch handle). servo machine. The machine is ready for transport, new backup batteries have been installed. Max. welding width: 850mm Min. Feed: 200mm Max. feed: 600mm Max. power: 150 pc/min Main voltage: 400V Control voltage: 230V Connected load: 42 KVA Pre-fuse: 80 A

Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press-Manufacturer: Benzing, pneumatic cutting device-Stroke: adjustable, max. 70 mm-Individual components: see photos-Dimensions: 150/130/H450 mm-Weight: 9.3 kg ... mais informação

2017 ProJet 2500Plus, defective as a spare part carrier or for repair. Machine reports error with support feed. According to 3D Systems, repair costs can be between €1,000 and up to €7,000. Device was last serviced in 2023 and has printed components in good quality., Possibly defective components:, - DMC Board, - Carriage Board, - PDAC-Board, - Umbilical track, [Buy 2017 3D Systems ProJet 2500Plus now](https://www.layerbylayer-shop/p/2017-3d-systems-projet-2500plus), Technology: MultiJet Printing

Collin Heating Press for Forming Plastics and Rubber Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites / Rubber / Ceramic Compounds Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

Vecoplan Shredder Type VAZ 300/250 Year 1996 Previously used for plastic  ... mais informação

Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.  ... mais informação

Mixer for granules and powdered products Mixomat. Completely in stainless steel. Mixing tanks on load cells. Tegiloxane pump. Vacuum pump AZO 5.5 kW. Granulate gate valve NW 100.  ... mais informação

Granule dryer for heating and drying hygroscopic plastic granules. Tank capacity 1200 l. Heating capacity 9 kW. Optionally available with air dryer AZO LE 400 K  ... mais informação

Dry air dryer Granulate dryer for drying and heating hygroscopic granules. Capacity 600 l. Heating capacity 4.5 kW. Optionally available with dehumidifier AZO LE 600 P.  ... mais informação

Well-maintained Mark Two 3D printer in good condition for sale. Running time: 4015 hours or 556 prints., Equipment:, - some remaining materials can be purchased additionally (expiration date expires), - 1 piece dry box for material storage, Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass), network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE, nozzle diam ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

A ProJet 2500Plus from 2017 is being sold. The device is in perfect condition, test printing is possible (compensation for expenses, which will be charged upon purchase)., Accessories: EasyClean system from 3D Systems, second construction platform, Technology: MultiJet Printing ... mais informação