outras máquinas para plástico usadas para venda

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Ermafa Type: RA 1200-350 , Agglomerator Control: Siemens S6 Built: 1995 Dimensions and weights Dimensions LxWxH m: 1.5 x 1.5 x 3.36 Machine Weight Kg: 4250 Other Motor-Three-phase cage rotor motor Performance-355 KW Speed-1488 rpm Voltage-380/660 V;50 Hz Degree of protection-IP 55 Type-IM V3 Mode-S 6 Mixed fraction from shredding 700-1100 kg

Number of milling agregates: 2 St.milling stroke vertical: x mmProfile height max.: x mmweight of the machine ca.: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

machine measurements: 6.850 x 3.600 x 1.900 mmmachine weight: 5.000 kgpower capacity: 9 kWCondition: used - as good as new unit is still completely packedSpecification: Medical surgical mask system completeConsisting of:- See sketches in the attachmentSummary of the equipment:This machine is mainly used for automatic forming of plane mask:the whole roll of cloth is driven by roller after being unrolled,and the cloth is folded and wrapped automatically.The nose bridge strip is rolled up for traction and unrolled.After cutting with a fixed length, it is imported into the edge cloth.The two sides are welded to the seal by ultrasonic welding.The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonicwelding.After the mask is made, it is transported to the flat belt linethrough the assemb ...

machine measurements: 9.657 x 1.472 x 1.985 mmmachine weight: -- kgpower capacity: -- kWCondition: used - as good as newSpecification: FFP 2 N95 mask system completeConsisting of:- see sketches in the plant- cycle time approx.: 35 - 50 pieces/min- not CE certified- Space requirement approx.: 9,657 x 1,472 x 1,985 mm- Completely assembledThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2001 serial number: 0940/01 operating pressure: 8 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Compressed air preparation or atomization optimization, manufacturer: ENSUTEC, type: Airmatic AM 3000W-400-1.3, serial no.: 20170433, max. heating power: 2,500 W, max. permissible heating power: 2,500 W, max. Operating pressure: 8 bar, compressed air heating control: 0..85C, air volume at operating pressure: 2,800 NL/min., max. air volume flow: 3,000 NL/min., with 4 control cabinets, 4 pressure accumulators a. 4-piece, main control cabinet, suitable for 8 spray guns, round and flat jet

 ... mais informação

 ... mais informação

Regenerative afterburner, manufacturer: KRANTZ, type: Ecoline 2 23,500 Nm³/h, year of manufacture: 2005, serial no.: G-8321161-2, with pre-filter or cartridges for RNV, roof passages must be professionally closed by the purchaser! ... mais informação

Painting line, alternatively as a complete package from items 2190-2193! Without item 2940! ... mais informação

Suitable for coating plastic profiles, includes flaming, hoover, humidifier, cooling unit, vacuum pumps, double diaphragm pump, pulsation damper, pull-rope emergency switch, reflection light barrier, filter control valve and other elements, with documentation. ... mais informação

Connected load: 2000W, weight: 80kg. ... mais informação

Pneumatic pressure: 8bar, connected load: 2kW, weight: 550kg, without documentation, spare parts or accessories, was maintained regularly. ... mais informação

Usable length: 3000mm, load: 50kg/m, connected load: 1.5kW, length: 3500mm, width: 550mm, weight: 208kg. ... mais informação

A window and door production line with 7 machines is available. 1) 1.1) HT line: Horizontal four-head welding machine (HSM) Stürtz, year of construction: 2019. 1.2) 2 MC - 1 head cleaner Stürtz with tool carrier top and bottom, year of construction: 2009. Add-ons for frames and sashes, profile type: Veka, installation depths: 70mm/76mm/82mm/116mm, max. size: approx. 2600mm/4000mm. 2) HFL Kruba milling machine: 3-axis milling machine, year of manufacture: 2011. 3) Rotox GZS glazing bead saw, year of manufacture: 2011. 2000 pieces in 8 hours. With 10-pair loading magazine (corresponds to 20 glazing beads) and 20-pair automatic removal table (corresponds to 40 cut glazing beads). 4) Series line: 4.1) & 4.2) Vertical four-head welding machine Stürtz VSM-20/VSM26-Turbo with handling system, year of manufacture: 2019. 4.3) Horizontal four-head plastering machine Stürtz MC-H4K-30/26, year o ...

Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the Fiber Placement process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible. ... mais informação

There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible. ... mais informação

For the storage and pre-treatment of two-component materials such as polysulphides or silicones etc. There are 3 Reinhardt Technik NF1 freezer available. Years of construction: 1) 2009/2) 2000/3) 1999. min. temperature 1/2/3: -45°C/-25°C/-25°C. Capacity: 18l, container diameter/length: 175mm/1000mm, refrigerant: R 404 A / 15. Dimensions: 910mm/500mm/1150mm, weight: approx. 70kg. Documentation available.