Fabricante:
(Categoría: 502)
This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN ... más información
Baler Presto HPK 50 HS, year of manufacture 2014 Manafacture: Presto Type: HPK 50 HS Year of construction: 2014 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg
Technical data baler:Manufacturer Europress Umwelttechnik GmbH, GermanyType EP5 150 V5Year of construction 2015Operating hours 19,173 hoursNumber of pressed bales 282,961 balesNumber of press strokes from the press ram 1,895,112 press strokesPressing force of main press 150 tSpecific pressing force 181.8 N/cm²Dimensions of feed chute 1,000 x 2,000 mm (w x l)Bale dimensions 750 x 1,100 mm (h x w), length variableDrive power 2 x 55 kW + 15 kW + 2 x 0.75 kWRated current 230 ACable cross-section supply 120 mm²Tying 5-fold vertical, fully automaticHydraulic oil tank capacity 4,300 lPLC control Siemens S7 / ET200STransport weight press 35,800 kgSpecial equipment:Base plates and side walls made of HARDOX steelFree tamper in front of the counter blade, with cleaning cycleScope of delivery:1 piece baler1 piece control cabinet1 set of oil collecting pans under the baler1 piece maintenance platfo ...
Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 40 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic, Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...
Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 25 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic. Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...
Baling press cardboard foil MF100 | 6 t pressing force The MF100 balers are ideal for pressing cardboard, paper, film, clothing and other materials. Volume reduction through compaction of up to 90%. The press is user-friendly with a large filling volume. The automatic bale ejector helps to remove the bales from the baler without any problems. Characteristics: Bale weight of up to 100kg Ideal for use with medium material volumes Fully automatic bale ejection Powerful cylinder for uniform material compaction Hold-down device to reduce material springback CE certified Made in Europe Specifications: Pressing force: 6 t Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2371 x 1388 x 1046 mm Transport height: 1876 mm Machine weight: 632 kg Cycle time: 28 seconds Noise level: ...
Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91 ... más información
Dual hydraulic pump for PAAL, 45kW Used 2-piece hydraulic pump for PAAL channel baling press. Can be used in systems with a 45 kW motor ... más información
Brand new gear pump, with internal gearing for PAAL Konti, Pacomat channel baling press. Can be used in systems with a motor of at least 22 kW ... más información
New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor. ... más información
Hydraulic power pack pump, pump for the baler HSM 1160 Plus ... más información
High-pressure pump, pump for baler HSM 500.1 VL with 7.5 kW motor ... más información
: gebraucht : 2005 : 7289 : prompt, Zwischenverkauf v : Italien : 13800 €: 1 : 20 to: 550 mm: 370 mm: 110 mm: 5 - 75 mm: 160 1/min: 187 x 143 mm: 35 mm: 38 mm: 185 mm: 225 mm: 225 mm: 1,5 kW: 1050 mm: 1250 mm: 2100 mm: 1150 kg2 V-guidesFront and side table shielding by safety doors2-hand control and foot pedalClamping plateThickness table and clamping plate 50/50 mmUser Manual in GermanCE Declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)
For sale is a Paal Dokon channel baling press from 2001 with 137 operating hours and approx. 2300 pressed bales. The press can be operated stationary and mobile with the following accessories. Specifications: Pressing force: 170 tons Duct cross-section: 1090 x 1080 [mm] Hopper filling opening: 1000mm x 2000 [mm] Connected load: approx. 132 kW Conversion to Rasspe RS9000 Knoter in 2019 Press stands on Faymonville Max 100 axle low loader from 2018 with 48 tons payload. For the operation of the press, there is an overseas container as an aggregate container with a power generator and hydraulic unit: 45 ́sea container, 60mm mineral wool insulated, partially reinforced for power and hydraulic power unit MOSA GE FSX electric generator set Three-phase stand-by power: 385 kVA (308 kW) / 400 V / 555.7 A Power three-phase PRP: 350 kVA (280 kW) / 400 V / 505.2 A Engine: FPT C13 TE ...
187 kW 26500 kg The tractor is in working order. In good technical condition, without significant defects. more info on Whats app, ... más información
with 3 compression chambers, from 30 t to 150 t material quantities per year, vertical, for cardboard, foils, canisters, PET bottles, 200 kN, volume reduction up to 90%, ball weight 250 kg, ... más información
Baler Presto HPK 50 HS (HPK 750 H), year of manufacture 2013 Manafacture: Presto Type: HPK 50 HS (HPK 750 H) Year of construction: 2013 Hours: 3788 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without guarantee and guarantee.
Hydraulic press for metal cans, make: Serman, model: HI, year: 2012, engine: 4 Kw (5,5 hp), drawer: 550x450 mm. MF-0068 ... más información
Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m ... más información