prensas usadas para la venta

Vertical baler HSM VL 500.2, built in 2006 Specifications: Manufacturer: HSM Type: VL 500.2 Stock No.: 9858 Year of construction: 2006 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg

Baler Up to 500 kg bale weight depending on the material Weight approx. 750 kg  ... más información

pdf description attached  ... más información

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Mobile plasticizer for pressing processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulic PN: 150 bar Pn: 16.5 kW P Heating:8 kW 400 V Single STW 150/1-3-10-K Temperature control unit 3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Manufacturer: BERGMANN Type: PS 8100 machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm charging height 1900 mm Machine weight: 800 kg engine rated current at 400 V 3.0 Rated current converter 230 volts Motor power: 0.38 2 2 kW Required fuse: 10 A, 13 rpm protection: IP 54 (D), (E) Fire hydraulic oil: HLP 32 Bale weight: 150-400 kg capacitance: 1 m3; ready for use

This press from Fontijne Holland is in machine storage at Plastima Used Machinery. The machine is from 1996 and is in great condition. – Brand: Fontijne Holland B.V. – Model: TP 1000 – Plate size: 500 x 500 mm – Max. pressing force: 1000 kN – Max. hydraulic pressure: 251 bar – Year built: 1996

Metal press type RETEC for sale in good condition.  ... más información

Sell a press for cans and tin containers Make: Becker Pruente Built: 1984 E-engine: 4KW/ 175Bar  ... más información

Briquette press for metal granules or shavings or slurries Machine is as good as new, has only 20 bh Hydraulic motor 55 kw Pressing pressure 2000 kg/m2  ... más información

Pressing pressure 16 tons Specific pressing force 46 N/cm2 Filling opening W 620 x L 1000 mm Bale cross-section W 700 x H 500 mm Bale weight at 1200 mm length (depending on material) up to 90-220 kg Theoretical throughput without oil cooler approx. 62 m3/h Practical throughput without oil cooler approx. 37-43 m3/h Drive power 11kW Weight approx. 4.5 t Born in 1999 Machine No. 29335 / 6607P00648 Colour in RAL RAL9002

Pressing pressure 8.2 t Specific pressing force 33 N/cm2 Throughput theoretically / practically without oil cooler approx. 18m3/h / 11m3/h Filling opening W450 x L 700 mm Bale cross-section W 500 x H 500 mm Bale length adjustable in 4 steps 400 – 600 mm Bale weight at 600 mm length (depending on material) 30-60 kg Drive power 4 kW Control HSM Slide Control Left side of the system Dimensions of the machine L 3935 x W1150 x H1405mm Weight approx. 900 kg Colour in RAL Grey Masch.- Nr. 28921/ 6424P02073 Year of construction 2007 Off the pitch as seen

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

Pressing force: 3.5 tons Connection: 400 V Engine: 1.1 kW Container: 660-1100 litres Height open: 1930 mm Width: 1210mm Depth: 1200mm  ... más información

Dimensions: Length 4240mm Width: 1850mm Height: 2015mm Weight: approx. 8.000kg Briquette diameter: 105mm Working pressure. 300bar Control pressure I.: approx. 70bar Required oil quantity: approx. 800l Control: Simatik Connection load of the machine: approx. 30kW  ... más información

Cardboard press, paper press Horizontal version bale size 60x70x70 cm with cutting device Make HSM 14 to Presskraft older model year unknown. Very comfortable due to Insertion shaft and cutting device. The finished bale can be placed directly on a Pallet can be pushed out. Has a large hydraulic agregat runs very fast and quiet. Sale without guarantee/liability or warranty for VB 3.600,--€ plus VAT VAT. Peter Knam Sweden 7 D-88085 Langenargen peterknam.de 07543/4242

Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...

Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...

Dear customers, currently we offer a polystyrene press incl. shredder for sale. It is a new machine that has 0 operating hours! Here are a few more technical details: Material to be processed: EPS moulded parts and chips Maximum material density that can be processed: 18 kg/m³ Loading opening: 700 x 360 mm Filling height 1,402 mm Achievable compaction: up to 250 Kg/m³ System throughput: up to 15 kg/h Block dimensions: 130 x 130 mm Power supply: 3x400 VAC+N+PE 50 Hz Connected load: 1.5 KW, 400V 50Hz incl. automatic press pressure regulation with pellet holder Finish: RAL 7035 (light grey) combined with RAL 2011 (deep orange) Incl. water dosing system for direct screw cooling up to 10 litres/h with water shut-off valve. Price plus VAT, which will be shown separately on the invoice. Transport possible worldwide for an extra charge! If you have any questions, please d ...