trituradoras usadas para la venta

This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.  ... más información

the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw  ... más información

used Foodwaste shredder with gearbox and engine 11 kw blades 18 mm 2 hooks  ... más información

This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.  ... más información

 ... más información

Engine power 18.5 kW 30 knives EC 60 Screen perforation 10/12 mm Knife and sieve renewed in 2023  ... más información

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fo ...

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Complete line with 2 pieces cutting mills type TRIA, each 55 kW. With big bag filling.  ... más información

Complete wood shredder line, shredder motor 55 kW. Composed of: - Shredder type Jenz with vibro feeding table - 1 piece discharge conveyor - 1 piece magnet It all fits on a standard tarpaulin truck.  ... más información

GRANULATOR TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition incl. 3 sets of rotor knives and stator knives incl. 2 sets of screens, 5 and 8 mm IMMEDIATELY AVAILABLE AND READY FOR USE  ... más información

2- Shaft shredder for pre-crushing sperm, beams, etc. with overbelt magnet Diesel engine from CAT  ... más información

2 shaft shredders with a rotor width of 1500 mm Diesel engine from CAT  ... más información

Edge strip shredder for edge trimming plastic films.  ... más información

Catalog No. 6796 TECHNICAL DATA - inlet width 410mm - inlet height 150mm - shaft diameter 800mm - number of knives 3 pcs - knife length 410mm - from the bottom, 6 pulling shafts, toothed - 2 pulling rollers, toothed from above - reverse gear - autoreverse - length of the conveyor belt 3500mm - width of the conveyor belt 390mm - main engine 37kW - feed motor about 4kW - feeder drive motor about 3kW - dimensions of the machine length / width / height 3300x2300x1900mm - feeder dimension length/width/height 3600x800x1000mm - weight about 7500 kg ADVANTAGES – Polish production – with a feeder – technical documentation – used chipper, very good condition Net price: PLN 75900 Net price: EUR 16323 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit  ... más información

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately