subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 505)
There are two shredders available, blade width: 3x 46mm, power: 30kW, machine 2 has a cracked casing and needs overhauling. ... mais informação
Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available. ... mais informação
Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure. ... mais informação
Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar. ... mais informação
Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h. ... mais informação
With conveyor belt, blower, shredder, screw, drum and screen. ... mais informação
Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. ... mais informação
Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia. ... mais informação
Max. bale dimensions: 700x490x730mm, bale weight: 40-60kg, length: 710mm, width: 1000mm, height: 1920mm, weight: 550kg. ... mais informação
The process engineering focus of the Doppstadt screw press is not on extracting as much biogas from the feed material as possible, but rather on providing a clean biogas substrate with a single machine, that requires no further treatment. Working chamber of the press screw diameter/length: 500mm/2000mm. Pressing baskets: round sieve holes with 8mm diameter. Feed hopper: volume: 5m³, feed height: 2900mm. Foldable one-piece rear belt: dimensions X/Y/Z: 5000mm/1200mm/3000mm with smooth belt. Eccentric screw pump for filtrate: max. delivery head/delivery length: 10m/15m. Throughput: 8-12t/h, liquid phase TS: 16%-23%. The machine is in mint condition with only 300 hours of operation. Including feed hopper DM 205, folding one-piece rear belt and eccentric screw pump for filtrate. Documentation available. On-site inspection is possible.
Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm. ... mais informação
Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW. ... mais informação
Conveyor belt Kleemann Brand: Kleemann A.A Length = 15000 mm. Belt width: 800 mm. Drive: 5.5 kW slip-on gearbox. ... mais informação
The HERBOLD plastcompactor is a system for the agglomeration of films, fibres, chips, dust and flakes. Poorly free-flowing waste is turned into an agglomerate with a high bulk density and good flowability, which can therefore be applied directly to extruders and injection moulding machines. The plant for sale has a main motor with 110 kw drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA, and bioplastics can be agglomerated without thermal damage or discoloration. The system consists of the feeding device with silo, the compactor, a re-cutting mill with sifting and fine material return On request, a pre-shredding can be offered that is adapted to the task Tests can be carried out in our technical center for suitability tests and sampling. We are the manufacturer of this ...
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal range (customizable) Rising Range (Customizable) Angle in the bend infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable Conveyor belt width (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they really need. Together with our customers, we develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contac ...
Dosing conveyor belt LKoreman with bunker Brand: LKoreman A.A length = 4700 mm, Strip width: 650 mm Drive: 5.5 kW slip-on gearbox Dim. bunker: 3600 X 2000 X 3300 mm ... mais informação