1 heater for a mixing plant, Fabr. WEHO in a 30 foot container ____________________________________________________________ - Incl. water pressure boiler, water softening system - Booster pump for water supply of the concrete plant Scope of delivery: - Container heating unit length 9550 - WE-HO steam boiler NDK 55, 640 KW, 820 kg steam - Pressure vessel with valve DN 65

TECHNICAL SPECIFICATIONS Manufacturer: MASA Description: Production plant for concrete products Year of Make: 1996 ESSENTIALLY CONSISTING OF: ------------ 01) Stationary horizontal compulsory mixer RECORD-HM 1500/2250 - Dry filling: 2,250 l - Output: 1,500 l ------------ 02) Dosing and weighing equipment for cement, water, aggregates - Cement silos - In-line feeder with weighing belt for 4 components ------------ 03) Stationary fully automatic block making machine RECORD 9001 V - Board size: 1,200 x 1,100 x 50 mm - Stone height: up to 400 mm - Mould height: 450 mm ------------ 04) Rope transport system, roller-supported, for dispatching and handling of production boards ------------ 05) Lifting and rotating basket with chassis - For removing the products from the underlay board to a steel table ------------ 06) Stacking and packaging system - Fully automatic, ...

Italian made Mario Croci & Figli Concrete pipe machine. In great condition (the machine is new and it has never produced a single pipe). It is weather protected, placed in a dry warehouse. It produces 2 and 2.5m length pipes of D30 up to D120cm diameter. It comes with D300, D400, D500, D600 moulds along with rings. Located in Greece

Paver, made Zenith 913, incl. 4 moulds for: - Hollow block 49/ 17.5 / 17.5 cm - Hollow block 30 / 24 / 17.5 cm - Hollow block 36/ 24/ 17.5 cm - Hollow block 36/ 24 / 23.8 cm The machine travels on triangular rails  ... mais informação

1 Gebr. Mixer, Fabr. Haarup Type 750/1 = - Variant: 728 - Fixed output 360 l, with lift, steering wheel, cement/spirit level - Weight: 3100 kg - Control of the system via Mixodatamat - Mixer capacity approx. 360 l  ... mais informação

An overhauled (reconditioned) mobile concrete batching plant Incl. guarantee Manufacturer: Stetter Type: M1 TZ Overhauled in: 2024 Power: 56m3 aggrgate storage / compartment batcher: 4 X 10 m3, total 40m3 Mixers: pan mixer , Stetter T 1000, compacted concrete output 1.00 m3 per charge Dosage: Aggregate wheighing in the skip bucket 2500kg Cement scale 500 kg water dosing hopper 250 kg Additive scale 1 X 12.0 l Control: STETTER MCI 460 (optional GEDIS IBS 33 W possible) operator stand in a office container installed Cement silo: Optionally possible cladding/housing: Optionally possible Delivery time: according to agreement (immediate available) Delivery free construction site possible assembly and commissioning possible by us Price on request Offers and prices are net ex location. Subject to prior sale, subject to errors and/or misrepresentations, withou ...

1 Gebr. Mat Cutting Machine Reinforced design up to single rod 12 mm Passage width 3 m Weight 645 kg  ... mais informação

2 used hydr. Tilting tables = 1 tilting table: Scarf size: - Length 12 m - Width 3.56 m - Parapet height on one side: 0.13 m 2 Tilting table: Scarf size: Length 11 m Width 3.56 m - Parapet height on one side: 0.23 m both with: incl. hydraulic ram incl. vibrator Surface on both tables good condition with signs of wear. Both tables have heating coils for hot water

2 used mortar silos made by Wachter/ Maxit - Capacity approx. 20 tons - Total height approx. 6 m - Ø 2.40 m - Screw conveyor, mixing cabinet and vibrator  ... mais informação

Pruning shears made by Reppel type TU 20-6 = - Weight: approx. 4.0 to -Sheet width/ sheet thickness 6mm  ... mais informação

5 used tilting tables = Formwork width: 2.85 m Scarf length: 12 m Parapet height: 0.23 m Steel Surfaces Condition: Good The load capacity per square meter is 550 kg, walls up to a thickness of 24 cm were made. Incl. heating coils for hot water, incl. 4 hydr. Stamp  ... mais informação

One used automatic stirrup bender from SCHNELL, model Bar Wiser 22. Bi-directional automatic stirrup bender from bar for the production of stirrups and cut-to-size bars using wires up to Ø 22 mm (#7) . Driven by electric servomotors . Bar Wiser 22N stirrup benders are equipped with: 12.000mm bench Max. pulling speed: 120 m/min (400 ft/min)

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg  ... mais informação

One used METAX cutting line from Peddinhaus for bars up to 40mm  ... mais informação

One used good as new SCHNELL AUTOMATIC BAR SHAPING MACHINE BAR WISER 28 Bi-directional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cut-to-size bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with: - Max. pulling speed: 180 m/min (600 ft/min) - 2 bending units (upper and lower) - Clamp for extraction of the end part of the bar - Virtual mandrel - Web teleassistance

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle  ... mais informação

Steel mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould has appropriate fittings and pressure plates and must be rebuilt accordingly for each step length. Step height 18cm, tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

Precast concrete plant Complete with mixer & mixer. Machines Manufacturer: FIBO With approx. 40 tables 5500 x 3200 mm 6500 x 3200 mm 7500 x 3200 mm Not yet dismantled. Location Lower Saxony Net/export price 290.000,-- Euro I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net and negotiable! Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Goldman +49 173 6242 600 (also WhatsApp)

Used Floor Paver Manufacturer: Zenith Type: 913 Year of construction: 1978 Used traveller for concrete blocks, pavers Manufacturer: Zenith Type: 913 Year: 1978  ... mais informação

Hydraulically operated tilting vibration table for products up to 5 m. long. Type v20 vibrators max speed 6000rpm. Hydraulically operated beltfeeder. Hydraulically power packs. Pneumatically operated gates. PLC control system with monitor and memory for 100 different mould settings. Demoulding crane. Transport system consist of 2 lanes and 10 units of chain stands. PLC control system 70 steel pallets for a product area of 5000 x 1,125 mm and a load of 3500 kg. Amexpo Consult Merkurvej 31, 9370 Hals Denmark Mobile: +45 25291017.