mandriladoras e centros de usinagem usadas para venda

bore capacity in steel (diameter):50 mmspindle cone:V MKspindle stroke:340 mmhight above plate:1230 mmrevolutions of the spindle, 16 steps:25 - 2000 U/minHeight adjustment:580 mmautomatic feed rates:0,04 - 3,2 mmtravel of the spindle head on the arm:1250 mmtable height:500 mmdimension of the dice table:630 x 500 x 500 mmMotor output:4 kWrange L-W-H:2500 x 1070 x 2840 mmweight:3500 kgMachine description:- stable cast body- Gearbox with hardened and ground gear wheels in oil bath- Thread cutting via spindle reversal- Hardened and ground heavy column- right-left-run- drilling depth limitation- high spindle torque- Feed overload clutch- quiet running- Hydraulic, switched feed and spindle gear with preselection- Hydraulic clamping of the stop, the column and the drill head- Ground and hardened guideways- ergonomically arranged controls- Lighting - standard- Coolant system - standard- Dice tab ...

bore capacity in steel (diameter):5 - 30 mmx-travel:450 mmy-travel:380 mmtotal power requirement:1,4 / 2,2 kWweight of the machine ca.:1.100 kgdimensions of the machine ca.:1.000 x 1.400 x 2.900 mmgear box:85 - 2.000 U/minspindle diameter:72 mmbore depth:700 mmthroat:300 mmspindle taper MT:3 T-slots:3 x 16/25 mmtable-size:700 x 300 mmspindle turning speed range:85/170/250/355/475/710/1000/2000 U/minmotor speeds::705/1425 Year:ca. 1975

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmspindle taper: MT:5 table surface area:750 x 1380 mmsurface area:1450 x 920 mmtotal power requirement:5 kWweight of the machine ca.:3000 kgdimensions of the machine ca.:2060× 930 × 2760 mm ... mais informação

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmspindle taper: MT:5 table surface area:750 x 1380 mmsurface area:1450 x 920 mmtotal power requirement:5 kWweight of the machine ca.:3000 kgdimensions of the machine ca.:2060× 930 × 2760 mm ... mais informação

Boring power:10 mmweight:590 kgconnected load:2 kWdimensions::1500 x 1300 x 2300 mm ... mais informação

bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:100 mmtotal power requirement:0,7 kWweight of the machine ca.:302 kgdimensions of the machine ca.: 620 x 800 x 1950 mmTable dimensions:350 x 250 mmspindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min ... mais informação

throat:580 mmbore stroke:650 mmX-axis :3300 mmy-axis:550 mmz-axis:650 mmDrill head RPM:bis 3800 U/minDrive x + y + z axis:Servomotor Rapid traverse x axis:20 m/minRapid traverse y axis:10 m/minRapid traverse z axis:10 m/minDistance table top - bottom Chuck:700 mmTable width:560 mmT-slots:14 Threaded drill up to:M4-M20 Tolerance x axis::0,1 mmTolerance of y and z axis::0,06 mmtotal power requirement:4 kWweight of the machine ca.:ca. 4 tdescription of the Company Bauer:Drilling rig driving stand principle the table stops, the drill head moves. Simple operation, CNC knowledge is not required. Data import DXF and CSV. Robust design with proven engineering components and a clearer structure of the machine guarantee high availability and long service life. All this for a price which paid off faster than expected.In the development of the control system, special attention was given to easy oper ...

:FB-160 spindle diameter:160 mmx-travel:4000/6000/8000/10000/12000/14000/16000 mmy-travel:2000/2500/3000/3500/4000 mmz-axis:1200 mmw-axis:700 mmspindle cone:50 SK/BTspindle speed max.:3000 U/minspindle drive:37/51 kWfeeds:X/Y/Z/W: 10 / 10 / 10 / 8 / 5 m/minrapid speed:X/Y/Z/W: 20 / 20 / 20 / 10 / 5 m/minmax. torque on the spindle:3.300 Nmcross section of ram:460x520 mmtable load:30 ttable-size:2500x2500 mmtable travel:1500 mmweight of the machine ca.:FBM-160 mit X=4m: 80 tpositioning accuracy:0.032/1000 mmrepeating accuracy:0.018/1000 mmCNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain Factory-new CNC controlled panel drilling machine with CNC control from Siemens / Fanuc / Heidenhain. All essential components from well-known manufacturers such as Siemens, SKF, FAG, Heidenhain, Igus and many more.Newly developed FB seriesConvenient for a variety of ma ...

bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:80 mmtotal power requirement:1,1 kWweight of the machine ca.:195 kgdimensions of the machine ca.:530 x 650 x 1850 mmspindle speeds::355, 710, 1400, 2800 U/minTable dimensions:340 x 280 mm ... mais informação

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm ... mais informação

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm ... mais informação

throat:640 mmtotal power requirement:1,6 kWweight of the machine ca.:450 kgdimensions of the machine ca.:1000 x 600 x 2100 mtable-size:455 x 380 mmchuck::MK 3 working area:355 x 280 mm ... mais informação

bore capacity in steel (diameter):55 mmarm length:1600 mmtotal power requirement:4 kWweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm ... mais informação

arm length:1600 mmweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm ... mais informação

bore capacity in steel (diameter):80 mmarm length:2500 mmWORKING RANGE -BORING-:. - drilling capacity full bore (steel):80 mm - throat (max):2500 mm - horizontal travel:2000 mm - vertical travel:1000 mm - sleeve stroke:450 mmWORKING SPINDLE / HEAD:. - spindle revolutions (min):16 /min - spindle revolutions (max):1250 /min - number of gears:16 - spindle diameter:104 mm - taper fixture : MK 6 :. - drive power (max):7.5 kW - max. distance spindle ... clamping surface:2000 mmELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:3730 mm - space requirements width:1400 mm - total height:4025 mm - total weight approx.:11000 kgAttachments :- Angular Table 1000 x 800 x 800- Coolant DeviceDescription of condition :SHOWROOM MACHINE

Machine in good technical condition, possibility of testing after agreement. Control system Fanuc ... 0i - MC ; Table clamping surface ... 1200 x 500 mm; X-axis travel ... 1020 mm; Y-axis travel ... 510 mm; Z-axis travel ... 560 mm; Spindle speed ... 0-8000 /min.; Number of controlled axes ... 3; Spindle clamping cone ... BT40.; Dimensions L x W x H ... 2960 x 2150 x 2600 mm; Machine weight ... 5000 kg; Max. table load ... 450 kg; Tool magazine YES; Number of positions in the tool tray ... 16. See photo for accessories.

Operating Instructions FMB Machining Center / Version 9. June 2011. Machining centres Software from Schüco installed Software design Special machines Operating instructions 7. technical data 7.1Machine dimensions Total length mm 9,750 Total depth / with LS mm2.750 / 3.300 Total height max. mm4.100 7.2 Axle travel X-axis mm approx. 7,100 Y-axis mm approx. 1,480 Z-axle bucket 710 V-axis (optional)mmca 6,980 A axis (optional)degrees180 ° Gajs30zga C axis (optional)degree360 ° W-axis (optional)mm 7.3Working spindle Spindle drive kW7.5 Spindle speedmin-120.000 Spindle mounting HSK E40 7.4Tools Mounting HSK E40 Wkzg positions 6 (more optional) 12 Wkzg maximum diameter mm 35 Saw blade Ø for milling spindle mm 400

HEIDENHAIN TNC 530 CNC X axis (strokes) 650 Y axis (strokes) 600 Z axis (strokes) 500 C axis (table rotation) 360,000 Spindle power Kw 15 kw Spindle speed (main spindle) 18,000 Maximum warehouse capacity 32 Spindle connection (spindle) Din 69871 Renishaw system predisposition Air blow through dry machining spindle yes Chip conveyor yes 5 axis continuous package yes

CharacteristicsMax machining diameter460 mmDimensions (L x W x H)5,01 X 2,36 X 1,80 mDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/2075 mmNumber of tool stations10 Speed max.3500 rpmBar diameter max.80 mmSpindle bore91 mmSwing- Ø, max.820 mmMax. Turning Length2000 mmWeight approx.7950 KgGeneralTurning Center; Control: Control M730UM

Working spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest quill extension 1,600 mm Spindle speed in the range 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Threads: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL ON STAND 3 150 mm TRAVEL OF THE STAND ON THE BED 6,000 mm BASE PLATE DIMENSIONS 12,800 x 5,665 mm