mandriladoras e centros de usinagem usadas para venda

The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm accessories for the machine include a column crane A tour is possible by prior arrangement. ... mais informação

spindle diameter: 180 mmx-travel: 8000 mmy-travel: 4000 mmControl: Siemens type: Sinumerik System 3 ram: horizontal adjustment: 800 mmSpindle travel W-axis: 1400 mmram: diameter: 220 mmengine output: 75 kWturning speeds: 900 U/minPlate area: 8000x6000 mmangular milling head: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0 bore depth: 10000 mmnumber of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mmswing diameter over bed slide: 1600 mmboring diameter: 50 - 310 mmcentre height: 800 mmspeeds:: 2,5 - 400 total power requirement: 74 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg  ... mais informação

Description: Column drilling machine with: automatic feed coolant device emergency stop device drilling capacity in steel 32 mm throat 320 mm drilling stroke 250 mm holder MK 4 MK table size 400 x 400 mm feeds 0.1 - 0.16 - 0.25 - mm/rev speed 85 - 1500 rpm total power requirement 2.2 KW machine weight approx. 0.75 t dimensions L x W x H 1.2 x 0.8 x 2.4 mweight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,400 mm

Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm  ... mais informação

bore capacity in steel (diameter): 50,0 mmarm length: 1.350 mmworkpiece height max.: 1630 mmturning speeds: 19 - 1320 U/minbore spindles - Morse Taper: 5 MKengine output: 5,5 kWweight: 5 trange L-W-H: 2,4 x 1,0 x 3,55 mmfeed movement: 475 mmfloor plate size:: 1650x1000 mmfeeds: 0,07-2,9 mm/UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 2000 mmy-travel: 1400 mmz-travel: 1400 mmspindle taper ISO: 50 table surface area: 1000x800 mmtable load: 12 tnumber of spindle speeds: 8-1650 U/mindigital readout: total power requirement: 12 kWweight of the machine ca.: 9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7266 Type: WH 13 Producer: TOS Created: 1972 Parameters: Work table length: 1800 mm Work table width: 1600 mm X-axis travel: 1250 mm Y-axis travel: 2200 mm Z-axis travel: 1700 mm Equipment: 4x extensions in the length of 4x1 m 8x tracks for 1000 mm extension Turntable New ball screws and bearings Tools & Equipment

I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)

bore capacity in steel (diameter): 32 mmarm length: 410 - 1000 mmworkpiece height max.: 765 mmcoolant: ja boring spindle diameter: 38 mmdiameter of quill: 70 mmspindle stroke: 225 mmboring spindle: MK 4 mm/minspindle turning speed - stepless: 70 - 2000 U/minfeed range - spindle: 0,04 - 0,32 mm/Ucolumn diameter: 225 mmbore radius max./min: max. 1130 mmtable surface area: 630 x 1320 mmheight adjustment: 500 mmbase plate: 1500 x 1000 mmT-slots: 4 StückT-slot - distance: 18 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mshift of supports: 590 mmwithout turntable and toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 2000 mmz-travel: 1400 mmspindle stroke: 1000 mmturning speeds: 5-800 U/minRadial face slide: 700 mmRadial face slide: 2,2-115 U/minspindle taper ISO: 50 table surface area: 2000x1800 mmTable load: 14000 kgtotal power requirement: 42 kWweight of the machine ca.: 24,5 tdimensions of the machine ca.: 6,3x5x4,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t

spindle diameter: 130 mmx-travel: 3000 mmy-travel: 2000 mmtotal power requirement: 4,5 kWweight of the machine ca.: 30 tSpindle Ø 130 mmSpindle taper SK 50Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mmLower table 3,300 x 2.400 mmMax. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mmFeeds 0.9 - 2,000 mm/minQuick feed for headstock and column 5,000 mm/minQuill feed 0.5 - 1,200 mm/minSpeed range, partially infinitely variable 4.5 - 1,250 rpmWeight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel.  ...

spindle diameter: 125 mmx-travel: 2360 mmy-travel: 1570 mmz-travel: 780 mmw-axis: 410 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Description: ELHA radial drilling machine - Distance from spindle center to column center approx. 470 - 1470 mm The machine is equipped with: - Quill feed from 0.1 to 1.12 mm/rev. - Dice table - Voltage 500 V (can be changed to 380 V, if costs are covered by buyer) For further technical data, please see the photos with the illustrations on the machine card!boring diameter: 40 mm, spindle taper: MK 4, turning speed range: 28 - 1120 rpm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 800 x 2,900 mm

Description Grande San Boring Machine Price Negotiable Rocco Al 76 Used a little Made In Italy ... mais informação

The machine is functional and immediately ready for operation XYZ 1500x1000x800 ... mais informação

spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: ICEM 402 total power requirement: kWweight of the machine ca.: 80 tdimensions of the machine ca.: mStocknumber 1210050Type of machine CNC Floortype Boring MachineMake SKODAType W 160 CNCBuild in 1974/retrofitted in 2002Type of control ICEM 402Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.000Z-stroke (mm) 1600W-stroke 1250 mmSpeeds (Rpm) 1 - 1.200Feeds (mm/R) 0,5 - 8.000 mm/min.Rapid feeds 8.000 mm/minTotal Power (KW) 180 KvAWeight 80 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrleistung in Stahl (-Ø: 35 mmthroat: 1000 mmworkpiece height max.: 200 - 1400 mmheight adjustment: 745 mmbase plate surface area: 1200 x 930 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mmturning speed range: 60 - 1850 U/minfeed range: 0,09 - 1 mm/Upower capacity: 3,7 kWweight of the machine ca.: 3,7 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.