- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- ABS Trading (2)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- Allround (3)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARCUS (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- BALLERSTAEDT (1)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMASCH (1)
- BAUMER (3)
- Bavelloni (6)
- ... mais
Fabricante:
(Categoria: 1300)
Ano de construção: 2007
usava
Sand feeding/mixing/reactors (modernized in 2007): Control system: Siemens S7, number of machines: 23. 5x Jöst discharge chutes, sand screen, mixer, Eirich UE 62 discharge unit, bucket elevator, reactors, twin-shaft mixer, various weighing belts and conveyor belts. Press plant (modernized in 2012): Control system: Siemens S7, number of machines: 6. 2x Atlas presses incl. table removal and stacking device, scraper, empty trolley platform and Semet turntables, Atlas blank transfer table, 2 press tools in use and 22 additional tools available, various conveyor belts. Hardening shop/steam boiler (modernized in 2015): Control system: Siemens S7, number of machines: 13. Dapf boiler standard burner Saacke, 9x hardening boiler Scholz with automatic condensate drainage, water treatment Grünbeck, condensate collection tank, low-pressure feed water tank, approx. 130 hardening scales. Packaging sy ...
Ano de construção: 2021
usava
Materials: Paper from 10 to 250 g/m², plastics, polypropylene, siliconized papers. Max. Width: 1200mm, max. diameter of parent roll: 1300mm, max. weight of roll: 1200kg. Min. length: 180mm, max. length: 1000mm, tolerance: +/- 0.2mm. Max. mechanical speed: 180 cuts/minute, max. stack height: 1300mm. Static current elimination system.
Ano de construção: 2007
usava
Mixer for the soap industry. Volume: 1063l, dimensions X/Y/Z with frame: approx. 3000mm/2800mm/2800mm, weight with frame: approx. 3000kg, weight without frame: approx. 2000kg. On-site inspection is possible. ... mais informação
usava
Various hydraulic aggregates are available as a package. Year of manufacture and technical data unknown. The blue RexRoth is available 4x. The machines are only sold as a package deal. Individual machines cannot be sold separately. ... mais informação
Ano de construção: 2005
usava
Load capacity: 2500kg, unladen weight: 4115kg. The forklift is still in use and in perfect condition. ... mais informação
Ano de construção: 2007
usava
Operating modes: Automatic (at regular intervals) and pedal control. Volume range: 200ml-5000mm, material of product contact parts: AISI 316 stainless steel. ... mais informação
Ano de construção: 1987
usava
One forklift including charger. Operating hours: approx. 22000h. Battery defective. Documentation available. ... mais informação
Ano de construção: 2006
usava
The staple fibre plant for sale specializes in the production of regenerated fibres from recycled raw materials and is designed for demanding applications in the automotive and textile industries. With a daily capacity of 35-40 tons per titer range, the plant is designed for two production lines and a downstream belt line with semi-automatic baling press. The production line includes important process stages such as drying and dehumidification, extrusion, spinning, fiber drawing, drawing and crimping, followed by a cutting process and packaging in bales. Extensions and modernizations were carried out, including 5x SCHOLZ dosing systems (2013), 4x extruder screws for line C (2014), 24x spinning pumps for line C (2015), 25x spinning pumps for line D (2016), as well as a conversion of all systems in the sliver line to individual drives from SIEMENS (2015). In addition, various components su ...
Ano de construção: 2005
usava
Number of heads: 16, weight: approx. 800kg. Including 4 additional weighing heads with electronics. ... mais informação
Ano de construção: 2016
usava
KUKA robots are used in a wide range of applications, e.g. handling, welding, assembly, packaging and other automation tasks. Payload: 10kg, reach: 900mm, weight: 52kg. On-site inspection is possible. ... mais informação
usava
There are 7 lift stacker (low and high lift) with chargers and batteries available. Riders: 3x Linde D14AP double-decker, operating hours: (2876h, 3354h, 3005h). 1x Linde L14LAP, operating hours: 823h. Carrier: 1x Linde D14AP double-decker, operating hours: 2500h. 1x Linde T20 (low pusher truck), operating hours: 2192h. 1x Stöcklin stainless steel pusher, operating hours: 3500h. 2x batteries for the D14 AP, 1x battery for the L14LAP driver, 6x chargers. Available from July, 2024.
usava
There are 6 baskets full of servomotors available. More detailed list available in the pictures. All servomotors work perfectly. Documentation available. On-site inspection is possible. ... mais informação
usava
There are 4 Kuka robots with various grippers, control cabinets, housing and conveyor technology (Interroll) available. Designed for handling a power unit of wallboxes and handling the entire wallbox. KR120) Load capacity: 120kg, reach: 2700mm. KR50) Load capacity: 50kg, range: 2700mm. List with specifications of the accessories in the pictures.
usava
There are 3 cabinets full of frequency inverters available. More detailed list available in the pictures. All frequency inverters work perfectly. Documentation available. On-site inspection is possible. ... mais informação
Ano de construção: 2019
usava
A Binar Quick-Lift 100 vacuum glass handling robot is available. Load capacity with vacuum suction cup for glass: 40kg, reach: 5000mm. Including base plate, which can be moved as required, and documentation. On-site inspection is possible. ... mais informação
Ano de construção: 2010
usava
A Scheugenpflug A300 dosing system including drum station is available. For use with a 2-component casting compound consisting of PU resin and hardener. Dimensions X/Y/Z: approx. 740mm/1570mm/1760mm, weight: approx. 420kg. On-site inspection is possible. ... mais informação
Ano de construção: 2006
usava
Vacuum chamber dimensions X/Y/Z: 800mm/670mm/550mm, max. product carrier size: 730mm/570mm, container volume: 60l, max. workpiece weight: 120kg. Dynamic mixer for 2 potting materials. On-site inspection is possible. ... mais informação
Ano de construção: 1996
usava
Measuring range X/Y/Z: 1000mm/1200mm/800mm, measuring head: Renishaw motorized rotary and swivel head with measuring probe model PH10M (without probe), control: Wenzel CNC controller WPC2040/3, software: Metrosoft CM 3.112. Panel: hard stone, panel dimensions X/Y/Z: 2400mm/1440mm/500mm, space requirement: 17m², weight: approx. 5500kg. Including manual control panel, PC and monitor. Documentation available. On-site inspection is possible.
Ano de construção: 2014
usava
A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. workpiece weight: 2kg. Transport dimensions X/Y/Z: 775mm/1600mm/730mm, working position X/Y/Z: 775mm/1900mm/960mm.
usava
Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).