Fabricante:
(Categoria: 1300)
Beam balance bagging installation for filling open bags from 10 - 50 kg, with feeding screw (inkl. Paddles and 1,1 kW drive) for fine and coarse dosing, with pneumatically operated bag clamp (Ø 200 mm) and automatic bag drop function, mounted in base frame. Prior use: Bagging construction chemicals (dry mortar etc.); in good condition, last calibration in 2014.
Low pressure blower GMB 14.8, Y.O.M. 1994, with 11.8 m3/min. volume flow at delta-P = 360 mbar, P1 = 0.64 bar. Drive 44 kW / 1.485 UPM, with check valve, overpressure valve, tank, air filter, base and sound insulation hood. ... mais informação
Low-pressure blower GMB 14.8, built 1994, with 11,8 m³/min. volume stream at delta-P = 360 mbar, P1 = 0,64 bar. 44 kW / 1.485 RPM drive, with flow check valve, pressure-limiting valve, tank, air filter, base frame and sound insulation hood. ... mais informação
Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame. ... mais informação
Parallel shaft gear with e-drive 30 kW (e.g. for use with a ball mill), motor shaft diameter 45 mm, N1 = 1.450 RPM, N2 = 14,5 RPM, drive shaft diameter 130 mm, with electrical brake, clutch with counter disc 600 mm diameter. Oil 190 CSX/50°C - Wa-No. 369226. Complete on base frame. ... mais informação
Type: VK 1056, Y.O.M. 2006. Single-deck rod sizer with integrated feed channel, rod carrier and rod rake made of stainless steel, screen frame rubberized 60 shore, 2 unbalance motors 2.8 kW / 960 UPM, open screen box on compression springs, brake control, steel base. Current cutting at 8 mm; machine was only in use for 12 months, therefore in very good condition.
Type: VK 1056, built 2006. Single deck vibratory bar sizer with integrated feeding chute, bar mount and bar rakes in stainless steel, screen frame rubber lined 60° shore, 2 imbalance drives 2,8 kW / 960 RPM, open screen frame on coils, break control, steel construction. Current parting cut at 8 mm; Sizer has only been running for 12 months, therefore it is in very good condition.
Pressureless dust filters for mounting on silos, material bunkers, etc. in standard steel version. Equipped with 20 pcs. fabric filter hoses (200 mm x 2,000 mm long each), incl. electric vibro cleaning. Filter area: Approx. 25 m2. In very good condition, several filters available (same construction).
Stainless steel vibrating sieve for wet sieving, 1 deck with 915 mm, 2 outlets, with unbalance drive (approx. 1 kW) and springs. 2 pcs. available. ... mais informação
Vibrating sieve for wet screening, 1 deck with 915 mm (36) Ø, 2 outlets, with imbalance drive (ca. 1 kW) and springs. 2 pcs availabe. ... mais informação
Mogensen twin-sizer with 4 decks (each deck has 2 screen gauzes with a sieving area of 1,32 m x 0,98 m per gauze) and 4 outlets. Incl. 2 imbalance drives (4,0 kW / 380 V each), meshes, covers and supporting springs. Since sieve has a central division wall two separate material streams can be fed (after corresponding adaptation of the outlet hoppers).
Mogensen double-sizer with 4 decks with 2 screen coverings (screen area per covering: 1.32 m x 0.98 m) and 4 outlets each. With 2 unbalance scoundories (each 4.0 kW / 380 V), sieve coverings, lids and support springs. Two different grains can also be given up by means of a middle bar, provided that the outlet housings are adapted appropriately.
Type: RHS 1 U 200 GR 360, built 1995. Centrifugal blower in special steel, 3.000 m³/h, 1,2 kp/m³, Drive: Loher, 4.500 RPM, 5,5 kW, on base frame with suction- and pressure-bellows and 7 vibration dampers, in mint condition. ... mais informação
REF-2103 DOUBLE TWIST HARD CANDY WRAPPER CM•500 Double twist hard candy wrapper. Brand: S.A. Carle & Montanari. Model: CM-H500. Series number: 01/E. Machine number: 2001. Dimensions: 1.100mm width, 1.600mm length, 1.850mm height. ... mais informação
REF-2102 DOUBLE TWIST HARD CANDY WRAPPER GD BOLOGNA Machine number 1. Format: 1.2. Dimensions: 1.300mm width, 2.200mm length, 1.700mm height. ... mais informação
REF-2094 NAGEMA SIZE-GRADING MACHINE FOR SWEETS/CANDY Serial No.: 053. Year: 1989. 380V, 50Hz, 10A. Model: ZS2. 500Kg. Dimensions: length 1,380mm, width 550mm, height 1,430mm. ... mais informação
Dust extraction system in ignition source-free design ... mais informação
Otto Müller continuous furnace Max. temperature: 200°C Metrics Length: 12.50 m Width: 3.10 m Height: 4.18 m Dismantling and transport is to be carried out by the buyer. For an extra charge also possible through us. Item location: 31832 Springe More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Combined CNC glass cutting table with topiary for glass & straight cut for laminated safety glass - CNC control panel with PC & modem for remote maintenance - 2 crushing strips 1 x crosswise 1 x longitudinal - software package "Edit-Way" with 250 parameterized shapes - CAD program for free drawings - vinyl cutting system incl. software & head - Shape scanner for copying shapes with laser system (also used for aligning the glass) - graf. Interface for controlling, cutting process & machine functions - Movement of the glass by means of air cushion - Loading and unloading by hydraulic movement arms - Zero point displacement for laminated safety glass cut - Ball-bearing sliding bridge in aluminium design - UPS system for voltage fluctuations. Specifications: max working area 3700 x 2600 mm - incl. side table 1500 x 3600 mm - glass thicknesses 2-19 mm - working height 880 - 970 mm adjustabl ...
4 KUKA KR10 robots Axes: 6 Max reach: 1101 mm Max load: 11 kg KRC4 control panel and remote control No working hours Installed in the plant for the production of electric cars - never worked ... mais informação