cepilladoras usadas para la venta

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Weibert fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Four-sided planing and roll forming machine SCM COMPACT 23 max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle approx. 4 kW Motor power vertical spindles approx. 5.5 kW Motor power upper horizontal spindle approx. 5.5 kW Infeed table length 2000 mm Motorized height adjustment of the feed system Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION

heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION

- Exhibition machine - TERSA planing shaft, electric height adjustment, digital display for planing thickness---------- Technical data ----------planing width: 520 mm, thickness table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planing shaft: 120 mm, number of knives: 4 pieces, clearance height: 240 mm, min. workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min., speed: 5,000 rpm, suction nozzle: 120 mm, Motor power 400 V: 9.5 hp / 7.0 kW, weight: 695 kgnew exhibition machine

Equipment/Specifications: Working width: max. 630 mm Knife shaft: Tersa, Ø 125 mm, 4 blades Planing height 2.8 - 250 mm max. chip removal: 8 mm Table length: 1,260 mm Table height adjustment: electric Feed speed: 6/12 m/min Feed rollers: made of rubber Motor power: 5.5 kW Speed 5,000 rpm Power ratings: 400 V, 50 Hz, 3~ Nominal current: 16 A Suction nozzle Ø 160 mm Weight: approx. 1115 kg Dimensions: 1,260 x 1,140 x 1,200 mm 1,800 mm with hood open All information is subject to the actual equipment!

x-travel: 11000 mmy-travel: 2.500 mmworkpiece height: mmtable width: mmtable length: mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 8000 mmy-travel: 2.500 mmworkpiece height: 2.360 mmtable width: 2.240 mmtable length: 10.100 mmweight of the machine ca.: tdimensions of the machine ca.: 20,0 x 8,5 x 5,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

FOUR-SIDED PLANER VINOUS Type: U 23 B.j 1994 Max working height: 180 mm Max working width: 230 mm Bgooeilcyar 6 Spindle  ... más información

Weinig Hydromat 2000 planing and moulding machine for four-sided planing and profiling of wood with a groove bed, without Soundproof cabin., Spindles: 5, spindles: 5, spindle 1: Bottom / 7.5 kW, Spindle 1: Bottom / 7.5 kW, spindle 2: Right / 7.5 kW, spindle 3: Left / 11 kW, Spindle 2: Right / 7.5 kW, spindle 4: Bottom / 11 kW, spindle 5: Above / 15 kW, Spindle 3: Left / 11 kW, working width: 230 mm, working height: 160 mm, Spindle 4: Bottom / 11 kW, spindle diameter: 50 mm, Spindle 5: Above / 15 kW, working width: 230 mm, working height: 160 mm, Spindle diameter: 50 mm

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

Four-sided planerWorking height: 740-750 mmMax working width: 305 mmMin working width: 50 mmMax workpiece height on 2 sides: 310 mmMax workpiece height on 4 sides: 160 mmMin workpiece height: 17 mmFeed speed steplessly adjustable: 10-60 m/minmotors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kWfeed motor: 7.5 kWmotor height adjustment: 1.5 kWspeed 5,500 rpmdriven top and bottom feed rollers

Working width: 410 mm; Planing shaft: Tersa knife; Number of knives: 4; dressing table length: 2000 mm; Hollow pointed joint adjustment: no; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Indication of planing thickness: mech. Counter; Feed speed: 6 / 12 m/min; Feed roller: steel; Pull-out roller: steel; Pressure Beam: Yes; Table rollers: no; Motor power: 5 kW; Engine brake: yes, automatic; Suction port: 120mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 430kg; TERSA planing blade system enables particularly low-noise running.Diagonally toothed steel feed roller for constant and uniform material intakeMaterial feed with two speedsNumerical display for the thickness table heightThe 2,000 mm long dressing tables enable easy dressing of large workpieces.Work tables a ...

electric height adjustment, lubricant pump, dust tested---------- Technical Data ----------Planing width: 220 mm, Planing height: 120 mm, Number of spindles: 4, Motor spindle 1: 4 kW, Motor spindle 2 + 3: 7.5 kW, Motor spindle 4: 5.5 kW, Feed speeds: 6-22 rpm, Suction nozzle : 120/120/120/140 mm, Dimensions (LxWxH): 3,450x1,400x1,400 mmSold as is, without technical inspection

Year of manufacture: 2004 Planner: High-speed Moulder/Planer Waco Maxi Working height: 14 - 150 mm Working width: 30 - 300 mm Complete moulder line with High-speed Moulder/Planer Waco Maxi and mechanization from Almab Planer/Moulder: - High-speed Planer/Moulder: Waco Maxi - Year of manufacture: 2004 - Feed speed: 30 - 350 m/min - Spindles: 7 Technical description: - Working width: 30 - 300 mm - Working height: 14 - 150 mm - Cutting circle: 180 - 260 mm - Combination: bottom/top/left/right/top/bottom/bottom - PLC system: Siemens - Weight: 16 500 kg

max. ram stroke: 230 mmthroat: 230 mmtable diameter: 0 mmare offered :2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 12501x overhauled new1x has to be overhauled.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

SCM P64 four-sided planer Working width 180mm Working height 100mm 4 spindles Spindle system: Bottom 4kw Right/Left 5.5kw Mountain 4kw Spindle diameter 35mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Entrance table with a length of 2300mm Machine dimensions: 3300x1200x1600mm

Number of spindles: 6 St.Working width: 250 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6 bis 24 m/min.Dimensions (L/W/H): 4800x1900x2150 mmweight of the machine ca.: 5400 kgControl: powerControl HOMAG Moldteq M-300 (OPTIMAT LPP-306)--------------------------------------Four-sided planer in window versionwith electronic axial and radial adjustment of the spindles.Advantages:--------------------------------------- Flexibility thanks to variable feed and adjustable spindle speed- Intuitive machine operation via powerTouch2- Quick setup using proLock spindle clamping- High precision thanks to solid cast iron stand- Ideal power transmission as each spindle has its own motoris drivenTechnical data short version--------------------------------------Number of spindles: 6Working width: 250 mmWorking height: 160 mmDressing table length: 2500 mmSpindle s ...

Planing and molding machine Weinig Unimat 23E for four-sided planing and profiling of wood with groove bed for short and curved workpieces as well as mobile spindle and long dressing table., working width: 230 mm, working height: 160 mm, spindles: 6, spindle 1: Bottom / 5.5 kW / 50 mm, spindle 2: Right / 11 kW / 50 mm, spindle 3: Left / 11 kW / 50 mm, spindle 4: Top / 5.5 kW / 50 mm, spindle 5: Top / 5.5 kW / 50 mm, spindle 6: Bottom / 5.5 kW / 50 mm, Dressing table length: 2.500 mm, feed: 5,5 kW, feed: 5,5 kW, Axial stroke vertical spindles: 80 mm, Axial stroke horizontal spindles: 45 mm, table rollers: Driven table roller in the outlet, Short parts package: Yes, groove bed: Yes, Slot bed milling cutter: Included, Control: Mobile spindle, Axial stroke vertical spindles: 80 mm, Axial stroke horizontal spindles: 45 mm, short parts package: Yes, control: mobile spindle

Working width: 510 mmLength of the planing table: 2.250 mmNumber of knives: 4 St.Motor output: 5,5 kWDimensions (L/W/H): 2.427 x 1.340 x 890 mm: Ja weight: 750 kgDust suction hood: 140 mm: Keilleistenmesser The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información