espalhadores de cola usadas para venda

IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition  ... mais informação

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

gluing unit: yes, snipping unit: yes, rough trimming unit: yes, fine trimming unit: yes, flat scraping unit: yes, edge buffing unit: yes, Approx. Onsite Dimension. (l x w x h): 5,000 x 900 x 1,400 mm, weight approx.: 1,200 kg ... mais informação

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the des ...

Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , serial number: 201011RX0 ...

Description: Curved edging machine. Power: 3.53kw ,  ,serial number: 130,201, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,800 x 1,300 mm, weight approx.: 950 kg ... mais informação

Description: Semi-automatic edge bander for straight, round and shaped panels shear device and roll-holder plate for the application of rolled edges with 3 mm max. thickness serial number: 193,150, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,700 x 1,300 mm, weight approx.: 900 kg ... mais informação

Description: Single-side edger with Gluing unit Eva. , Two -motor trimming unit. Trimming unit Tilting trimming unit ne-motor rounding unit. Variable speed drive in the feed. ,  ,serial number: 3,790, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,000 mm, weight approx.: 2,000 kg

Description: Single-sided gluing edger composed of: Eva Glue unit End trimming unit, Trimming unit Cleaning brushing unit Maximum edge height 40 mm Edge from 0,4 to 2 mm Feed speed 5 m/min, Minimum working width: 60 mm Minimum working length: 200 mm Power of the milling unit 0,33kw at 12000 rpm Double row of upper clamping rollers: ,2 rollers of the pressure glue unit Double knife trimming unit Double trimming unit  , Large board support arm serial number: 11-L-1759, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 1,400 mm, weight approx.: 600 kg

Description: This machine ,is ,checked and refurbished by the distriutor , and he offer 6 months guarantee Single-side edging machine Joint triming unit , EVA gluing ,unit. Two - motor end trimming unit. Straight trimming unit. Inclined trimming unit. Profiling unit, 1 motor . Scraping ,unit. Scraping - edge unit. Cleaning brushes unit.  ,serial number: 117, joint trimming unit: si, gluing unit: si, snipping unit: si, edge buffing unit: si, return system: no, total power approx: 12,3 kW, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,000 x 1,950 mm, weight approx.: 700 kg

Description: Single-side edging machine composed by: Inlet spindle moulder unit , Inlet Liquid unit ,at the entrance. EVA glue unit. End Trimming unit 2 motor. Straight refilter unit. Two-motor rounding unit. Scratch-off group. Scraper-cleaning unit Cleaning brushing unit . Approx. Onsite Dimension. (l x w x h): 8,000 x 2,000 x 2,300 mm, weight approx.: 3,600 kg

Description: One-sided edge gluer for machining straight workpiece edges and for gluing and finishing different edge materials in longitudinal and transverse grain Free space for MF21 router set Extended pressure zone / 6 emphasis rollers instead of 2 Automatic displacement of run-in ruler one side Retraction system 2 rolls Workpiece overhang 40 mm Sliding slide Workpiece support for single-sided machine Workpiece support extension Feed continuously adjustable 18-25 M/min. Pre-installation boomerang Spray unit anti-adhesive top/bottom Spray unit with 4 nozzles with anti-friction agent Joint cutter/joining cutter aggregate KAL300/S2 Jointing cutters manual displacement system Basic bonding part A3 Extension walk-in 500 mm Quick clamping system for application unit QA/PU Compact bonding unit PU65 Application unit PU65 (exchangeable) Automatic displacement of pressure zone Hood unit HL84 p ...

Description: Edge Bander: STREAM B1 8.0 with LIGMATECH ZHR 05 BOOMERANG Return System Machine Specifications STREAM B1 8.0 S/N: 20798 Distance between centers: 8000 mm Total length: 9200 mm + Return Panel length: min 150 mm - max 3200 mm Panel width: min 100 mm - max 3200 mm Panel height: min 10 mm - max 60 mm Thickness of edgebanding strip in rolls: min 0.3 mm - max 3 mm Thickness of edgebanding strip in strips: max 20 mm Edgebanding strip height: min 15 mm - max 65 mm Working line height: 950 mm Panel projection from drive belt: 35 mm Drive track speed of advance: min 10 m/min - max 24 m/min Suction air speed: 30 m/sec Air supply pressure: 7 ÷ 10 bar Machine length: 9140 mm Width: 2600 mm Height: 2100 mm Return System Specifications LIGMATECH ZHR 05 BOOMERANG Longitudinal Processing Panel length: 300 - 2500 mm Panel width: 60 - 800 mm Cross Processing Panel length: 300 - 800 mm P ...

Description:  , Brand: Brandt Type: KDF 210 Year of construction: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ Speed-controlled track control with optical start-stop indication sensors Control screen: LCD, 4 lines of text, ergonomically integrated on the input side on the hood  , Configuration: Chain conveyor transport Central lubrication Upper pressure/ guidance: via central adjustment with 2 rows of rollers positioned offset to each other Joint cutters: (2x) 0.75 kW, 200 Hz Diamond-tipped tool, manual positioning (Siko counters), max. 3 mm overhang and max. 40 mm workpiece thickness Glue unit: A3 glue unit for hot-melt and possibility for PU glue application Glue output roller under workpiece in following or counterflow mode Heavy-duty cutter Pressure zone: Pneumatically driven 1st pressure roller, 2nd roller running freely ensures good compaction Hacksaws: (2 ...

Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (Bündig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or  ...

Equipment: - Gluing part for hot-melt adhesive granules - Cross-cut saw unit - Flush milling unit at the top and bottom - Scraper unit for PVC edges - Buffing unit 2 motors - Control panel at the machine inlet Specifications: Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: Fixed lengths 0.4 - 3.0 mm max. (3 x 45 mm) Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3075 mm

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for max. workpie ...

Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is WORKING IN GOOD CONDITION from stock Lieboch

edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,800 mm, weight approx.: 700 kg ... mais informação

Description: main engine power: 1 kW serial number: 9915 pneumatically driven pressing length approx. 2500 mm tabletop approx. 2500 x 620 mm with electronic temperature control safety light barriers dimensions in mm: approx. 3200 x 1500 x 1900, weight in kg: approx. 1300 serial number: 9,915, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,500 x 1,900 mm, weight approx.: 1,300 kg