espalhadores de cola usadas para venda

Description: - Inlet ruler with automatic adjustment and extension 500 mm - BONDING PART A20 BASIC - Pressure zone C with automatic adjustment - Release agent spray unit - Pre- and profile milling unit with pneumatic adjustment - Edge sanding unit KS10 - Profile sanding unit top/bottom PS41 / PS42 WITHOUT returnedge magazine with: 2 -fold roller, serial number: 0-200-21-6055, edge thickness: 0,3 - 3 (20) mm, workpiece thickness: 8 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 25 m/min, joint trimming unit: 2 x 3 KW, gluing unit: A20/QA34/C, snipping unit: HL84 (2 x 0,8 KW), rough trimming unit: 2 x 1,5 KW, fine trimming unit: 2 x 0,4 KW, profile trimming unit: FF12 (4 x 0,4 KW), edge sanding unit: KS10 / PS41 / PS42, flat scraping unit: ja / yes, profile scraping unit: MN21 automatic, edge buffing unit: ja / yes, control: Power Control PC 22, return system: Nein / No, Approx. Onsite Dim ...

 ... mais informação

 ... mais informação

Machine line Combiform / single-sided edge banding machine, consisting of: Feeding by means of 1 lifting table, 1 one-sided edge banding machine IMA, type: Combi-Form/K/I/R75/885/V/vR3, year of construction: 1997, comp. no.: 15018, with 3 conveyor belts, partly as a waste inclined conveyor belt, 1 brushing unit WANDRESS, type: BIQ 46/1/2200, year of construction: 2007, no.: 070838, 1 output roller conveyor SYSTEMATIC, type: AR-2, year of construction: 1997, machine no.: 97.052

SED edge banding machine, consisting of: 1 loading roller conveyor with tine pick-ups for forklift loading, 1 automatic rail transverse carriage QVW 38, 2 loading boxes, with lift tables and stacking portal or gantry loader WAMHOFF, type: Robomat-M-II-B, year of construction: 2001, machine no.: 111.10, 1 double-sided edge banding machine IMA WEHRMANN, type: Combima/FC/K/II/1410/V/VR/R/S02, year of construction: Ü99, machine no. 249/262, with marking spray unit REA JET HR, 1 brushing unit WANDRESS with humidification, 1 rotary cone station VENJAKOB, type: VDK/M, year of construction: 1999, machine no.: A99 09 001, with control WEHRMANN Micromat, 1 double-sided edge banding machine IMA, type: Combima/K/II/885/F/SR, year of construction: 1981 / Ü1999, machine no.: 149/268, 1 automatic drilling machine BIESSE, type: Techno FDT, year of construction: 2004, serial no.: 44258, weight: 5,890 k ...

Wemhöner press, consisting of: 1 loading roller conveyor with tine pick-ups for forklift loading, 1 stacking portal with lifting platform embedded in the floor, 1 HELMUT FRIZ dust collector, 1 OMMA glue applicator, type: NSC.1600, year of construction: 1992, serial no. 4185, 1 foil laminator HELMUT FRIZ, nameplate not traceable, 1 belt and buffer line with cutting device, as station, 1 foil press WEMHÖNER, type: VS003/1086, machine no.: 9600377, operating pressure: 320 atm, pressing pressure: max. 1,086 tons, 1 double trimming line WAMHOFF, with brushing unit WANDRESS, machine no. 10 05 14, 1 BÜTER lift table embedded in the floor, 2,800 kg, with acceptance roller conveyor ALTEK, year of construction: 2013, factory no. 20.15.0913

 ... mais informação

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: machine number: 0-261-20-8279 workpiece thickness: 8 - 50 mm edge material thickness: 0,4 - 3 mm feed speed: 11 m/min extraction diameter: 3x80/1x100 mm pneumatics: 6 bar  , please also have a look at the PDF document of this machine serial number: 0-261-20-8279, edge thickness: 3 mm, workpiece thickness: 8 - 50 mm, feed: 11 m/min, Approx. Onsite Dimension. (l x w x h): 4,153 x 1,525 x 2,182 mm, weight approx.: 1,300 kg

Description: supply voltage 3 x 400 (50 Hz) V standard installed power 11 kW, with the airmotion option 16 kW feeding table with air cushion 1050 x 400 mm milling group application group cutting group at the ends rounding group at the ends radia finishing group surface finishing group finishing group with brushes constructive characteristics, standard working dimensions: the minimum width of the processed part - 70 mm the minimum length of the processed part - 140 mm the minimum height of the processed part - 8 mm the maximum height of the processed part - 60 mm the thickness of the applicable PVC/ABS edge film - 0.4 - 3.0 mm applicable thickness of solid wood wand - 0.4 - 12.0 mm compressed air working pressure (min/max) >,7 / 12 bar compressed air system pressure >,8 bar internal diameter of compressed air installation connection: 13 / 1/2' mm for more details see 4-Tempora F800. ...

Zig - Zag Veneer Splicing Machine Kuper Type: FW-Pimus (special model) Year of construction 2008 Nominal current 4 A Voltage: 230 V Specifications: Stand projection: 920 mm Working height: 950 mm Veneer thickness: approx. 0.4 to 2.0 mm (also thick veneer) Feed in 3 stages: approx. 10 to 23 m/min 3 K heating system. The new temperature control ensures optimal melting results of the adhesive thread and thus ensures a perfect connection. Discus discs with tolerance compensation mechanism Electrically controlled thread tear-off roller new heating system with standstill control Frequency converter controlled drive Space requirement: approx. 1,400 x 560 x 1,470 mm Incl. accessories

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 50mm; Workpiece width: minimum 110mm; Glue basins: granules, quick-change basins; Cross-cut scissors: yes; Caps / flush sawing: yes ; Milling Station: Bevel / Radius; Corner copying: yes; Flat - Scraper: Yes; Radius Scraper: Yes; Schwabbel: Yes; Anti-Adhesive Spray Unit: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 3314 mm; Machine width: 1085 mm; Weight: 545 kg; Convenient and simple control of all important functions via control panel at the frontExcellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reductionPrecise and proven units enable optimum machining and perfect finishing of the edgePre-milling unit equipped with two slide milling cuttersHigh-fr ...

pre milling unit: yes; edge thickness: max 3mm; workpiece thickness: 8mm - 50mm; workpiece width: min.110mm; glue system: granulat, quick-change glue pool; cutting knife: yes; cutting saw: yes; milling station: chamfer / radius; corner copy unit: yes; flat scrapper: yes; radius scrapper: yes; buffing unit: yes; anti-adhesive spraying unit: yes; inlet ruler adjustment: manual; workpiece thickness adjustment: manual; motor power: 5 kW; machine length: 3314 mm; machine width: 1085 mm; weight: 545 kg; Convenient and easy control of all important functions via control panel on the frontExcellent accessibility to the working units thanks to large hood, which provides additional protection and noise reduction.Precise and proven units enables optimum machining and perfect edge finishingJoining unit equipped with two slide cutters High-frequency motors for edge processing Stan ...

single-sided CNC edge processing machine, manufacturer: OTT, type: Storm+, year of manufacture: 2017, serial no.: H/321 75, connected loads: 24 kW / 400 V / 42 A / 50 Hz, CNC control BECKHOFF, touch screen, automatic return unit OTT Translift+, year of manufacture: 2017, no.: TS/81075, belt conveyor, return belt conveyor belt FOURTEC SFB 90/110, conveying speed: 40 m/min, 1 roller conveyor at working height approx. 300 cm, various roller conveyors, mobile edge magazine, various cabinets with accessories, Hot Melt Gluing Unit OTT 40456C01V2, Year of manufacture: 2016, No.: CMS/207, 5.9 kW

Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... mais informação

Description: Workpiece: Workpiece thickness: min. 6 mm, max. 45 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Maximum edge thickness: 3 mm Drive: Feed rate: 10 m/min Power: 1.5 kW Control voltage: 24 VDC Compressed Air: Operating pressure: 6 Bar Limit pressure: 8 Bar Connection: Quick coupling, nominal width 7, hose inner diameter at least 12 mm. Air consumption: 5 L/min Machine comes without RETURN ,serial number: 98/1-003, Approx. Onsite Dimension. (l x w x h): 5,335 x 1,670 x 1,415 mm, weight approx.: 3,000 kg

Compact and mobile edge banding machine Bi-Matic 4.5 Starter Plus for gluing and processing edge material Including extensive supplies of glue and edge material., Aggregate: 4, Aggregate 1: Caps, Aggregate 2: Round, Aggregate 3: Pulling blade, Aggregate 4: Babble ... mais informação

Description: Number of rollers: 2, roller length 1330 mm, roller diameter approx. 200 mm, voltage 380 volts, without additional accessories, without CE certificateApprox. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,500 mm, weight approx.: 300 kg ... mais informação

Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.

Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (Bündig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or r ...