máquinas de borracha usadas para venda

machine measurements: 2.200 x 1.200 x 2.260 mmmachine weight: 1.000 kgpower capacity: -- kWCondition: usedSpecification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations- year of construction approx.: 2011 - pick-up stations: 16- measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm)- Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day- Technical application: surface defect and crack detection on O-rings- Sorting function: Good, Bad, Undefined- Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm-  ...

Wind-u for AUMA / Rotocure, Calender,.. transportable, plug and play E+L centering  ... mais informação

Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).

Pattern Making Router for composite mould tooling CMS Athena 5 Axis Router Manufacturer: CMS Industries Model: Athena 2015 Z 800 Six station tool changer Uses HSK63 tool holders. A set of 6 holders with various gauge lengths included With new un-machined table Blower type vacuum pump Powered through a normal red 3 phase plug Year 2011 In full working condition and regularly serviced

clamping force: 11000 kNinjection volume: 12500 cm³screw diameter: -- mmplaten size: -- mmCondition: used,Specification: injection moulding machine for rubber - used, in very good condition machine was serviced annually by manufacturerclamping unit:- Euromap (size): 11000-25600- clamping force: 11.000 kN- size of heating platens L/W/H: -- x -- x mmInjection unit:- Injection volume max.: 12,500 cm³- Injection pressure: 2050 bar- Dosing force: 118 kN- Control: Siemens S7- Connected load: 3x 400 V, 50 Hz, N- Total current: 276 A- Back-up fuse: 300 A- Pump drive: 277 bar- Driving power: 45 kW- Weight approx.: 43.8 tOperating hours approx.: 33,130 hoursThe data for this ad was created with ModulMWS - t ...

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads  ... mais informação

Automatic hardness testing device with 3 heads Shore 00 Shore A Shore D The device needs gibitre software installed on the computer to work. The device consists of a stand and 3 heads  ... mais informação

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.  ... mais informação

Sample marker S1  ... mais informação

Machine number 205557/2012 Without softwear! Head failure!  ... mais informação

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

available GK-190-E as option available Gear Box, Set of Spare Rotors, DC Motor  ... mais informação

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs  ... mais informação

QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5,  Year of manufacture: 2014 (New),  CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.

Qty 1 x HF/Pomini VIC95X (IM110VIC), Hydraulic hopper (IM90-E type), Refurbished complete chamber and hopper installed new in August 2016, Machine number: 487, year of rebuilding 2014, CE marked, Chamber volume approx: 104Litre, Useful volume at 0.75FF: 78Litre, Batch weight at SG 1.15: 90kg, Hydraulic dust seals (PYH Type), Hydraulic drop door with linear actuator and toggle latch, Rotor geometry adjusted by 2 x 2.2kw, 1420rpm motors, Unidrive gearbox, Ratio 20.6:1, With Ansaldo 352KW, 1030/1230rpm, 875Amp, 440V water cooled DC variable speed motor. Siemens S7 PLC control system (cpu 315-2DP, step 7). Complete and in very good working condition. All manuals and documentation available. Used spare chamber parts available/included:- Qty 1 set (2pc) used rotors Qty 2 sets (4pc) used drilled sides Qty 2pc used door tops Qty 1pc used weight The mixer has now been r ...

machine measurements: 2.900 x 6.300 x 3.300 mmmachine weight: 3.500 kgpower capacity: 9,7 kWCondition: used, very good conditionSpecification: Cryogenic drum deburring- Operating hours: 11,499 hours- welded stainless steel cell- insulation: 120 mm PU foam insulation- batch volume up to: 300 litres- drum volume: 540 litres- Drum speed: 5 - 60 rpm- Temperature control: PID controller down to -150°C- Feeding: swivelling conveyor belt- Dedusting: integrated, insulated cyclone deduster with maintenance flap- Control: Siemens S7-1500 with KP900 Comfort key panel incl. barcode reader- Process documentation: Data management via LAN and/or USB- Article memory: 4.000 pieces- Dimensions W/D/H: 2,900 x 6,300 x 3,300 mm- Weight approx.: 3,500 kg- Heating capac ...

Z-Splicing Machine Make: Z-AUTOMATION Model: Z splicing stand alone Year 2014 8 kW, 6 bar Profile Cross sections 50 x 40 mm 2 - 4 splicing cavities Length 4600 mm Siemens Simatic HMI touch screen control Foot pedal control Emergency kill switch  ... mais informação

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs  ... mais informação

machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação