subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 308)
Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination
Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.
I offer a carding machine along with the weight of the Befama brand after a general overhaul. The machines have been completely renovated, including painting. Equipped with sawing material with a working area of 2000 cm. I also offer a number of other machines for the textile industry - including a complete line for the production of drag.
Full Description Variable angle fences enable the Wegoma WSA-1-E to achieve welded angles between 30° and 180° on 150mm, 180mm and 225mm cills. The WSA-1-E boasts the ability to achieve double-reverse butt welding thanks to the large setting and heater plates. ... mais informação
ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials ...
Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based
Mixer for plastics CONBOPLAS SRL8002000754 The mixer combines hot and cold mixing. After hot mixing, the material automatically enters the cold mixer for mechanical cooling. - hot tank 800 l. - cooling tank 2000 l. - hot mixing time from 6 to 10 min. - cooling time from 10 to 15 minutes. - engine power 110 kW The device is adapted to the production of WPC terrace boards. Components needed for the product such as PVC and wood dust or MDF dust can be combined.
The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.
The Breaker device is used to form a foil on a roll, it enables the insertion of an opening-closing tape. The machine is powered by 380V. ... mais informação
Press mould Cap for injections 40 mm Turkey widely used in the medical industry. ... mais informação
Corner cleaning machine - ELUMATEC Very good Year: 2003 ... mais informação
Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003 ... mais informação
Spindle copy router - ELUMATEC Very good Year: 2003 ... mais informação
End milling machine - ELUMATEC Very good Year: 2003 ... mais informação
DRYER JPS/100, of the year 2014 (Equipamientos J. Puchades - machinery for plastics). ... mais informação
Brush machines with injection molds Our entire machine park from the brush department is for sale. We sell machines with injection molds. The full list of machines and injection molds is in the attachment. ... mais informação
BWU 1100 (2015) BWU 1100(2017) Max air pressure: 600 kPa Euroline – optimized for in- or off-line garbage bag production • Basic converting line for garbage bag production including a non driven C-folder • In- or Offline configuration – with or without surface unwind • Flexible unit, easy to operate and maintain • Servo driven • A combination of well proven FAS Converting units • Sealing from two sides with single sealing bars • Unique tensionless sealing system • Optional equipped with – PP-insert and TU220 tape unit Information taken from the documentation online (also attached to this listing) Master roll max diameter, mm [in]: 800 [31.5] Web width sealing max, mm [in]: 1060 [41.7] Bag length, min-max, mm [in]: 600-3000 [23.6-118] Machine speed, m/min [fpm]]: 20-100 [65.6-328] C-folding, mm [in]: 220-620 [8.7-24.4] Cycles/min, max : 160 W ...
Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice. ... mais informação
Conveyor belt Length: 5 m, width: 0.55 m. In stainless steel, height adjustable with sprinkler installation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice. ... mais informação
Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control ... mais informação