outras máquinas para plástico usadas para venda

Agilista 3200W 3D printer from 2019 for sale. Accessories: Accessories: Modeling Studio Software, Support Material Removal Container, Maintenance Tools, Cleaning Kit. Device is ready for use, requires maintenance., Installation space (x,y,z): 297 x 210 x 200 mm, printing technology: Multijet technology, Layer thickness: 20µ, 15µ, resolution xy: 635 x 400 DPI, equipment: Software, cable, heat bath, file formats: STL, network connection: Ethernet, mass: 188 kg, Dimensions: 1360 x 944 x 700 mm (H x W x D), mains voltage: 100 - 240V, 50/60Hz,single phase, max. 750 VA, Legal regulations: CE approval mark, Installation: 2015, Accessories post processing: On demand, Net installation space for models: 297 x 210 x 200 mm, printheads: 1 piece, Interface: Modeling Studio, software: Windows 32Bit / 64Bit, printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing  ...

This Matsuura Lumex Avance-25 3D Printer was manufactured in the year 2018 in Japan. It is equipped with a Fanuc 31i Model B control unit and has 3 axis. The machine has a spindle speed of 450-45000 rpm. ... mais informação

This KEYENCE Agilista 3200 W 3D Printer was manufactured in 2022. It is in flawless condition, like new, with only 66 hours print time so far. It comes with several accessories: Modeling Studio Software DVD (not license-based), STL error correction function, Container for removing support material, Stainless steel water tank, Maintenance tools (spatula, mirror, LED flashlight), Cleaning set (disposable gloves 100 pieces, cleaning cloths 600 pieces) and Start-up liquid (4 liters of polypropylene glycol). The 3D Printer is still under production and can be visited at any time. Contact us for further details!

This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. ... mais informação

This MARKFORGED Metal X 3D Printer was made in 2018. ... mais informação

This HP MJF 580 3D Printer was manufactured in the year 2019 in Germany. It is equipped with a HP control unit. The machine has a printer resolution of 1200 dpi. ... mais informação

This Stratasys Objet500 Connex3 3D Printer was made in the year 2018 in Israel. Three materials can be printed at the same time, i.e. colored models are possible, hard/soft material combinations are possible, and transparent components can be printed. The high pressure cleaning system is included. Very low hours, only around 1600h. See tech specs PDF (English) and noozle test PDF attached for more details. Check out the video gallery to see the 3D Printer in action.

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015. ... mais informação

This MAS 120E Extruder machine was manufactured in the year 2015 in Austria. It has a load of 182 kVa. The machine was completely retrofitted by MAS 2019 and since then not in production, Its condition is like new. ... mais informação

VERTICAL MIXER, 5.000 lt.capacity, total height approx 4.500 mm including transmission group, max Ø 1.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 7,5 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 7.5

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw  ... mais informação

 ... mais informação

The machine for the production of polyurethane foam (polyurethane foam) MODEL BLCR35 is intended for mixing and feeding a two-component polyurethane system for the production of rigid foam with self-extinguishing properties into a mold (door leaf). The BLCR35 model is a low pressure foaming equipment. The mixing head is cleaned by flushing with a cleaning agent dichloromethane (dioctyl phthalate can also be used for cleaning).

Piovan MDW70 gravimetric dispenser, year of production 2007, new never used ... mais informação

Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination

Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.

I offer a carding machine along with the weight of the Befama brand after a general overhaul. The machines have been completely renovated, including painting. Equipped with sawing material with a working area of 2000 cm. I also offer a number of other machines for the textile industry - including a complete line for the production of drag.

Full Description Variable angle fences enable the Wegoma WSA-1-E to achieve welded angles between 30° and 180° on 150mm, 180mm and 225mm cills. The WSA-1-E boasts the ability to achieve double-reverse butt welding thanks to the large setting and heater plates. ... mais informação

ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials  ...

Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based