máquinas para produtos farmacêuticos e cosméticos usadas para venda

Rotative tablet press of 27 stations Max. diameter of the tablet 16 mm Filling depth 18 mm Pressing capacity 80 Kn Prepressing capacity 20 Kn Production from 48.000 to 100.000 h Dimensions : 1.000 x 950 x 1876 . Weigh 1850 Kg. Force feeder Type of tool : B  ... mais informação

Cremer CF 830 tablet counter from 1986 8 lanes tablet counter Programmable control panel with vibration control. Stainless steel and powder coated construction. Tablet dust extraction ports. Quick release for easy cleaning. Dimensions: 1.500mm x 1.000mm & 2.200mm (LxW&H) ... mais informação

Elec: 380V / 50Hz, Pressurized air: 6 to 7 bar, Integrated vacuum pump: Yes, A (mm): 20-85, B (mm): 17-65, C (mm): 50-200, Dimensions (mm): 3700x1860 H2060, Documentation: Yes ... mais informação

Type: two-door pass-through type Sterilization method: superheated water Camera size: 900х1450х2500mm Chamber volume: 3.25m3 3 carts can be placed in the camera. Each cart can accommodate 5 trays. The set includes more than 20 carts and more than 200 trays. ... mais informação

• Set up for ALU/PVC operation • Output 15-50 forming cycles/min, max. 100 punching cycles/min, max. 400 blisters/min • Format range and die-cutting area max. (feed x width) 220 x 188 mm • Drawing depth max. 12 mm • Vibratory feeder with brush box for tablets/capsules • Product inspection from underside of blister with colour camera Scanware Lynx-Spectra HR and own PLC Bachmann MX 207/DIO 248 for error carry-over (retrofitted in 2010) • Roller stand • Perforating station • Film monitor • Bad ejection • Ejection counter control • Vacuum pump • Waste cutter • Transfer belt to cartoner • Electronic cam control Digitronic CamCon • MC control system • Drive 220/38V/50Hz • Without format tools

Used bachiller model PC-200 stainless steel vacuum mixer. 338 litre total capacity, 126-200 litre working capacity. Mixing bowl approximately 866 mm diameter x 650 mm straight side. Flat top and inverted dished bottom rated full vacuum. Stainless steel jacket rated 3 bar pressure. Anchor agitator with teflon scrapers driven by 2.2 kw 220/380 volt 3/50 1415 rpm or 2.55 kw 440 volt 3/60 1715 rpm motor through sabre model mas55df gearbox 69:1 reduction ratio. Approximately 220 mm diameter dispersion blade mixer direct driven by 7.5 kw 380 volt 3/50 1450 rpm or 8.6 kw 440 volt 3/60 1755 rpm motor. Lid raised and lowered by 0.55 kw 220/380 volt 3/50 1400 rpm or 0.63 kw 440 volt 3/60 1695 rpm hydraulic power pack. New 1987.

• Package dimensions L 45-300 mm, W 40-190 mm, H 16-100 mm depending on format set • Output max. 47 cycles/min, the max. output depends on the format and product • For all heat-sealable films (PP/PVC/PE/Cellophane) • Film roll outer diam. max. 320 mm, width max. 425 mm • 90 degree infeed belt • Knife bridge with new knife • Eltex film unloader with discharging bar • Perforation knife • Without tear thread device • Without multi-layer stacker • Various format parts • Contactor control • Electr. connection 230/400V/50Hz

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150  ... mais informação

Powder Mill powder mill Manufacturer: Glatt Model: TR 160 ... mais informação

Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge

Power installed :11 Kw. Power consumption :5,5 Kw. Production :15, 50 strokes per minute for 12 mm depth forming 15, 40 storkes per minute for 28 mm depth forming Index :Max. 145, 222 mm Format range :forming area 220 mm length 188mm width Depth forming :12 and 28 mm, forming reel : 460 mm, covering reel :Max. 300 mm Forming thickness :Min. 0,1 mm, max. 0,5 mm Width covering foil : min. 90mm max. 210mm, of the internal reel : 70..76 water consumption :aprox. 0,1 m3/h. Compress air consumption :aprox. 6 Nm3/h , without pre heating :aprox.14Nm3/h, with pre heating

equipped with a LAETUS system flask tilter Was previously used on a syrup line, Elec: 380V 50Hz, A + B (mm): 140mm max, A (mm): 15 - 90mm, B (mm): 12 - 70mm, C (mm): 50 - 200mm, Dimensions (mm): 2280 x 1570 mm, Height (mm): 1755 mm, Documentation: X in Spanish ... mais informação

Electrical consumption: 4.0 kW average consumption: 3.5 kW mechanical Speed max. 100 Cartons/minute product power supply: max. 300 blister/min Size: A x B x H Min. 30x15x70 mm Max. 100 x 85 x 150 mm Folding machine Prospectus Guk sizes. 3000 x 1300 x 1660 mm compressed air consumption 4-6 bar without elevation 1-2 Nm3/h with prospectus 5-8 Nm3/h Leatus for prospectus code, case and prospectus presence

For drive motors : 75kW - 100HP Rotor speed : ~3000 RPM Hammermill featuring: - Milling screen surface : 0,79m² - Rugged all steel casing in 14 mm steel plates - Solid steel rotor, electronically balanced, running in - Extra heavy duty sealed ball bearings - Specially hardened hammers, each row mounted on common shaft for fast changing of worn out hammers - Two milling screen sets, 0,7mm and 1,0mm with quick clamp device for convenient screen change. - Milling chamber with integrated stone trap. - Reversible infeed flap for rotor rotation in two directions to use both hammer-edges. - Large hinged doors for easy access to the milling chamber. - Whole unit mounted on anti vibration buffers. - With flex coupling male/female - With E-motor 75 kW, 2-pol 3000 rpm - with stands and outlet to discharge conveyor - with transition piece to connect filter suction pipe and airlock ...

GIUSTI mixing vessel 300mm dia x 470mm deep with shallow dish base, gross capacity 33 litres approx working capacity range 5-25 litres, top entry Silverson model AX3 homogeniser with 60mm dia workhead, 0.26kw 2730rpm 415v 3ph supply flameproof motor. Scraped surface main mixer, 30mm dia bottom product outlet. Stainless steel heating jacket, insulated and clad in rigid stainless steel, rated at 3bar w.p. 6bar t.p; Stainless steel control panel with 2 x amp meters, motor stop/start, LCD display for temp, variable speed control with RPM display for main motor. Overall dimensions 1350mm x 800 x 1660mm high. Supplied new in 1990, previously used on cosmetic product manufacture, excellent condition.

• Useful capacity 663 l • Double jacket 48 l • Operating temperature 160°C • Operating overpressure tank -1/2 bar • Double jacket max. 6 bar • Container can be tilted for emptying • Lift lid for emptying by external lifting device (not included) • Parts in contact with product made of stainless steel 1.4435 (AISI 316 L) • Propeller agitator 2.6 kW • Anchor agitator with side scraper 2.2 kW • Temperature display • Pressure gauge • Hose connection in pressure lid with spear tap • Sight glass • Lighting • Pressure fittings • Drive 380V/50Hz

N° of Stations 35 Output tablets per hour 70.000 - 210.000 Maximum tablet diameter 16 mm Maximum depth of fill 8.5 mm Upper punch entry 1.5 - 8 mm Die type B tooling Die diameter 30.1 mm Die height 22.22 mm Upper/lower punch length 133 mm Punch body diameter 19.05 mm Compression force 80 kN Power 3.75 kW Net weight 1143 Kg Can be also for doble layer.

• Format range folding box (5 inch) width 15-90, height 12-70, length 50-200 mm • Product length max. 155 mm • Output 20-120 cartons/min, clocked motion, the maximum speed depends on the format and product • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 81 • Code reading Laetus Argus 4 (2x brochure, 1x folding box) • Colour embossing unit on both sides • Bad ejection with ejection counter control • Vacuum pump • Electronic cam gear retrofitted • SPS CAM • Various format parts (insertion hopper) • Various spare parts • Electr. connection 400V/50 Hz

Model CAR-T5 is a reliable, totally mechanical cartoning machine for different types of products and very versatile. The robust construction of the whole system allows the production with almost all types of cardboard. The machine comes with the automatic bottle feeding system. The size change is simple and fast, adjustable with the handle and easy to maintain. The cartoning machine is built with state-of-the-art technology and is very robust. The application area of the cartoning machine is almost unlimited. This model is used worldwide in the pharmaceutical, cosmetic, chemical and food sectors. Technical data: Production: 120 cartons/min handling: intermitent carton measurements (A x B x H): Min. 20 x 16 (12) x 60 mm max. 95 (105) x 70 (80) x 200 (205) mm Electrical consumption: 4 kW Power: 9.5 kVA Compressed air: 9.5 m³/h 6 bar.

Rotary Press 23 Stations Kilian LX 23 A ST , the machine was recently updated with a rejection system and control unit C50V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept EURO-NORM Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm