pós-impressão: outras usadas para venda

Stack height: 530 mmfeeding depth: 320 mmInsertion width max.: 340 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

surface of working table: 650 x 410 mmconnected load frequency: 230 Vweight of the machine ca.: - kgBook spine warming platefor warming the book spines before rounding.Tabletop unit.Adjustable inclination. Temperature control via integrated thermostat.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture 1985 4 drilling spindles Adjustable drill spindle spacing Underframe electr. Foot switch Delivery date: immediately from stock Price on request. We deliver and install worldwide!  ... mais informação

ESKO Kongsberg XL 20 - sample making, short run production, cutting and creasing year 2010 Work area 1680 x 1270 mm max. sheet size 1750 x 1620 mm max. speed 50 m/min - 33 IPS Standard Material Clearance 30 mm FlexiHead for 3 tools MP-HF Multi Purpose High Frequency cutting tool new XL/iXL/V20 V1612 reinforced underlay good condition

weight: - kgconnected load frequency: 0 Vnumber of stapling heads: 2 St.For normal stitching (straight)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Paper, cardboard, plastic: 100 - 600 g/m2Cutting width max.: 740 mmspeed: 150 m/minFolding and gluing machineOperating hours 1st module: approx. 4,800 hours | Number of pieces: approx. 27 million.Operating hours 2nd module: approx. 1,700 hours | Number of pieces: approx. 4.3 million.Basic machine including standard equipment:- Suction belt feeder, top loader- 2x transport module (2.80 m) with roller drive- Delivery (1.00 m) with press rollerHotmelt premelter Baumer HHS XM-04-2, 2 hoses, 2 point nozzles, 1 surface nozzleCold glue device with 7 point nozzles and a pressure container- PLC with 8 control channels (Omron), colored touch panel- Pressure rollers (2x10, 4x6, 2x3, 2x1)- 14 pcs. cross members for tool attachment- 28 pcs. clamp connections- Tools for plow, tab plow and tipper folding- Connection value 400 V, 3 phases, 50 Hz- Technical machine documentationAdditional equipment:- Adh ...

Petratto macchine MINI BAT 2 – creasing Year: 2009 Die creasing Touch screen control Sheet size: Max. 900mm x 450mm; Min. 200mm x 150mm. Creasing length: 450mm. Min. creasing distance: 0,1 mm. Paper weight: 80-600g/sqm.- up to 30 programmable points in one sheet Air compressor : 6bar Pile feeder with vacuum belt Max speed in A4 size and one creasing: 11.000 sheets per hour Power: 4kW (50/60Hz) Dimensions: 2500x900x1500mm. - Weight: 350kgs

Year of manufacture 2004 automatic feeder Sniffer Delivery date: immediately from stock Price on request. We deliver and install worldwide!  ... mais informação

M. No.: 2069056 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed syste ...

Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/sin ...

-Year 2001 -Five feeders model 370 -Cover feeder model 1529 -Two stitching heads Hohner M 50/8 plus other spare heads for Omega points -Three knife trimmer model 0361 -Normal delivery or Stacker -Air pumps, manuals, electric diagrams, all parts and accessories -Can be seen in production in Italy

Sitma C960H-961 bundle wrapper with optional side sealing and heated  ... mais informação

connected load frequency: 230-240 Vweight of the machine ca.: 30 kgSpine width: 10-120 mmRounding machine for book casesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Standard equipment incl. compressor  ... mais informação

One used book sewing machine Meccanotecnica Aster 160 Year of man.: 2000 Description: - Digital display - Optical sheet control - 4 4 opening possibilities Technical specifications: max. signature size. 320 x 420 mm min. signature size 75 x 150 mm max.number of stitches: 11 max. mechanical speed: 160 cycles/min

Hohner Orion 4 wire stitching machine; cleaned and tested; 3 stitching heads 70/20 with coarse tool; Max. Staple thickness 20mm; Clamp spacing 70-550mm; Table size 1000x330mm. Wire stitcher Hohner Orion 4; cleaned and checked; three stitching heads 70/20 with tool rough; max.thikness 20mm; distance between heads 70-550mm; table size 1000x330mm.

Horizon PST 40 Shed delivery with press roller / Press stackerTechnical data: Format max: 440 x 310 mm Format min: 60 x 64 mm Maxi height 1000 mm Min height 280 mm Speed max: 50 – 230 m/min Pressing pressure: 20,000 N Adjustable height 280-1000 mm Capacity: 50-230 m/min Power supply: 230V; 50 / 60Hz – 0.9kW Weight 280 kg

Good working conditions  ... mais informação

Max. size= 76 x 66 cm, Availability= 042024, UV coater with suction pile feeder, UV and IR drying, pile stacker delivery. • Max. Sheet: 30" (76cm) x 26" (66cm) • Material thickness: 150-600 g/m² • Sheets per hour: up to 4,800 • Power: 220V, 3Ph, 60Hz, 55A Modular design with automated feeders and delivery Apply gloss-satin and matte coatings Quick change textured rollers for an array of finishes From start to coating in less than 5 Minutes Less than 10 minutes to switch between different coatings All steel construction 3 roll application system with quick-change roller design Stainless steel doctor bladeLOT Loaded in truck or container

Professional pallet wrapper with stretch film height adjustment Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph  ... mais informação