máquinas inyectoras usadas para la venta

The press is currently decommissioned, and is equipped with an inverter for which it has energy consumption reduced to 50% It is equipped with a pneumatic solenoid valve. The cylinder is Bimetal replaced new for 3 years (polystyrene has always worked) ... más información

Engel hose pouring machine type: IT 2000-350 controls: CC 90 construction year: In 1987 Schliesseinheit Schliesskraft t: 350 opening ways mm: 700 cross-beam measure mm: 735x735 installation height min / max. mm: 250/660 record size: 1080 x 1080 hose unity snail diameter mm: 70 hose weights gr: 1009 hose volumes cm?: 1154 hose pressure cash: 1400 mass and weights dimensions LxBxH m: 9.00 x 2.10 x 2.40 machine weights kg: 20500 other Euromap 12 angels Robot

Description: serial number 137300 Closing force 750 KN Size of mould platens 490 mm x 490 mm Distance between tie bars 320 mm x 320 mm Mould opening stroke: 375 mm Mould height min.: 250 mm Max daylight: 625 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: kN Screw diameter: 40 mm Ls/D ratio: 15 Injection pressure 1150 bar Stroke volume: 188 ccm Shot weight, PS: 158 g Injection rate: 201ccm/s Injection stroke: 150 mm Nozzle pressure: 72,3 kN Nominal capacity of pump motor: 15 kW Installed heating capacity: 5,56 kW Adjustable barrel heating zones: 3 + 1 Dry cycle time: 2 sec Reservoir capacity: 220 ltr. Operating voltage 420 V, 50 Hz Heating 5,56 kW Pump motor 15 kW Total load 20,6 kW Max. fuze rating 80 A Control voltage 24 VDC Dimension 4300 x 1850 x 1600 mm Weight 2400 kg Approx. Onsite Dimension. (l x w x h): 4,300 x 1,850 x 1,600 mm, weight approx.: 2,400 kg

Clamping force: 1600kN, stroke volume: 215cm³, injection pressure: 2020bar, power: 15kW, weight: 5.7t, including six Temperature Control Devices SINGLE and Dry Air Dryer PIOVAN. ... más información

Clamping force: 2500kN, clamping plate dimensions: 840x904mm, opening stroke: 520mm, screw diameter: 72mm, length: 6500mm, width: 1465mm, height: 2030mm, weight: 6.4t, operational hours counter: 100,662h. ... más información

Used injection moulding machine Dr. Boy 22 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Example photo of identical machine

Arburg 370cmd year 1988. Machine is ok but needs a pump. ... más información

the press has about 45,000 hours in good working order mounts 42 screw capacity PS 250 grams 1600 bar l/d 20 top dimensions 605x605 column passage 400x400 mold thickness 175-475 plate light max 895 12kw ceramic heating resistors double pump motor power 18kw press dimensions 5.60x1.52x2.06 weight 5500 kg. accessories included: second cylinder + screw (to be regenerated) double nozzle new tip with three spare valves - spare ceramic resistance 300 liter aluminum tank for cooling pieces in water

Engel hose pouring machine type: IT 1300/300 control: Construction year CC90: In 1988 Schliesseinheit Schliesskraft t: 300 opening ways mm: 600 cross-beam measure mm: 635 x 635 installation heights min / max. mm: 200/660 record size: 910 x 910 hose unity snail diameter mm: 60 hose weights gr: 661 hose volumes cm?: 735 hose pressure cash: In 1900 mass and weights machine weight kg: 12500 other Engel robot

Engel injection moulding machine Type: It with 7000 / 900, Sanzgiri robot system. Control: CC 90 built: 1988 Clamping unit Clamping force t Gap between 900 mm: 1000 Min/max height mm: 400/1000 plates size: 1500 x 1500 Injection unit Screw diameter mm: 120 injection weight gr: 4886 Injection volume cm 3: 5429 spray pressure bar: 1320 Dimensions and weights Dimensions Lxwxh m: 13.2 x 2.7 x 2.9 machine weight kg: 47,000/20,000 Miscellaneous EUROMAP 12 Sanzgiri robot system.

SANDRETTO series 7 1960/350 Clamping force: 350 T - 3500 KN Distance between columns: 600 x 600 mm Dimensions of the trays: 910 x 910 mm Minimum/maxi thickness of the mold: 200 - 650 mm Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Weight: 14,500 kg Mounted mixing screw + std screw + one-piece screw

Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t. ... más información

KrausMaffei-150 clamping force 1500 fixation plate size 720x710 distance between bars 500x450 mold height 300 opening stroke 600 coupling pin pneu ejector 250 ejector stroke 150 screw 50 disponible from September 2021 ... más información

Mould thickness: 100-440mm. ... más información

Mannesmann Demag D60 - 182 NC3 Plastic injection moulding machine  ... más información

Clamping force kN 2000 Mould thickness mm 200-500 Minimum mould diameter mm 315 Opening stroke mm 200-480 Distance between tie-bars V/H mm/mm 510/430 Stroke, injection unit mm 470 Nozzle contact force KN 75 Screw diameter mm 55 Injection pressure bar 1751 Max. injection volume cm3 465 ø centring ring mm 125 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M16 Robot Yes

Manufacturer Krauss Maffei Type KM 200 - 620 B Control MC 3 Built in 1989 Closing unit Closing force t 200 Opening path mm 750 Holm size mm 560 x 500 Installation height min/max mm 300 Plate size 830 x 770 Spraying unit Screw diameter mm 50 Spray volume cm3 377 Spray weight gr 339 Spray pressure bar 1638 Dimensions and weights Dimensions LxWxH m 7.10 x 1.70 x 2.30 Machine weight Kg 9500 Other 2 x Core pulls 3 x Air valves robot interface

clamping force: 4200 kNinjection volume: 572 - 1716 cm³screw diameter: 90 mmplaten size: 1040 x 1040 mmclosing stroke: 620 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

screw size: 115 mminjection shot weight in Polysterol: 3915 g/PSclosing pressure: 6600 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Machine series: Allrounder 370 CMD 850-325 Injection unit: 40mm Machine No.: 145464 Year of construction: 1989 Injection pressure: 1800 bar Clamping force 600kN Machine weight: 3700 Kg Clamping force 800kN Heating 8,31KW Engine 18,5KW Total power: 27.2KW accessories: - 50er injection unit thermoplastic - Selective switch - Hydraulic slide-in conveyor belt (height adjustable 3 steps, integrated in control) - External diskette drive (Arburg Original) - Electronic water battery - Documentation