Fabricante:
(Categoría: 1107)
Nominal output: 364kW, max. ambient temperature: 27°C, weight: 4.2t, with Combined Heat and Power Plant Köhler Ziegler SY 050 GKT, electrical output: 50kW, thermic output: 80kW, rotational speed: 1500/min, fuel: natural gas. ... más información
Absorption Refrigerator System with cooling tower Karlsruhe KRD 1/12-28-3. Cooling output: 214kW, permissible temperature: 10-60°C, max. overpressure: 1bar, nominal volume flow: 87.1m³/h, with Radial Fan Wolter GmbH TRZ 900/80 KTK and Absorption Chiller Carrier SCS 16LJ-03E-LC. ... más información
Heating output: 140 kW, heating output switched in 4 stages of 35 kW each, air volume flow of 6500 m³/h, air speed of 9.8 m/s, stainless steel tubular heating element (1.4828) with a surface load of 3.9 W/cm², inlet temperature: approx. 20°C, outlet temperature: approx. 160°C, temperature sensor PT100, EC declaration of conformity. Two identical air heaters are available, with documentation, the heaters are still unused, an on-site inspection is possible.
Volume flow: 3000m³/h, coolant capacity: 20kg, coolant output: 43.8kW, weight: 1.27t. ... más información
Volume flow: 7650m³/h, heating output: 21kW, connected load: 87kVA, weight: 960kg. ... más información
There are two identical compressors available, max. final pressure: 8bar, rotational speed: 3000/min, motor power: 45kW, operational hours counter: ca. 80,000h, each with a Dry Air Dryer Atlas Copco MD 100W. ... más información
Four Hyfra TRK90-ÖF-S are available, cooling capacity: 11.6kW, max. ambient temperature: 42°C, connected load: 9.8/11.3kW, weight: 170kg. ... más información
There are two identical screw compressors available, operating pressure: 7.5bar, max. pressure: 8bar, volume flow: 0,82-2,57m³/min, width: 750mm, length: 895mm, height: 1260mm, weight: 337kg, were completely overhauled and always serviced. ... más información
Three identical chillers are available, refrigerant: R134a, connected load: 80kW weight: 1.44t, on-site inspection is possible. ... más información
Power: 1250kVA, max. voltage: 21kV, max. current: 120.28A, weight: 3.79t, without spare parts, accessories or documentation, an on-site inspection is possible. ... más información
Supply/exhaust air volume flow: 6500m³/h, total supply/exhaust air pressure: 992/881Pa, heating capacity: 48kW, cooling capacity: 22.6kW, connected load: 8.1kVA, with Hygromatik FLE80-T steam humidifier, pipework, control cabinet, AERMEC WLR 101° water-cooled chiller, condenser, frequency converter, other elements and documentation, on-site inspection is possible.
Volume flow: 0.93m³/min, rotational speed: 3000/min, motor power: 7.5kW, weight: 196kg, with compressed air tank OKSA, capacity: 1000l, and dryer, an on-site inspection is possible. ... más información
Operating pressure: 21-27.6bar, power: 2.,5-24kW. ... más información
Volume flow: 7.8m³/h, rotational speed: 2935/min, power: 55.3kW, length: 2350mm, width: 970mm, height: 1950mm, weight: 1,275t, operational hours counter: 37,429h, an inspection is possible. ... más información
Volume flow: 5850l/min, rotational speed: 5750/min, motor power: 37kW, length: 2000mm, width: 900mm, height: 1250mm, weight: 830kg, with documentation, an inspection is possible, has been out of service since 2011, until this date it ran without any problems. ... más información
Volume flow: 300m³/h, max. rotational speed: 2920/min, motor power: 0.42kW, length: 2850mm, width: 880mm, height: 1100mm, an inspection is possible. ... más información
Volume flow: 1000m³/h, max. rotational speed: 3000/min, motor power: 0.45kW, length: 6050mm, width: 920mm, height: 1370mm, an inspection is possible. ... más información
Cooling output: 5.4kW, length: 765mm, width: 930mm, height: 1680mm, weight: 187kg, an on-site inspection is possible. ... más información