cintas transportadoras usadas para la venta

Lippert Belt Conveyor Riser with arch and straight GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveyor length (NL): 6150 mm (ascending conveyor 2310mm + upper straight 3840mm)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Deflection roller (UR): Ø = 34  ...

Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø  ...

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller  ...

Lippert belt conveyor ascending conveyor GF 6960-650-500 RA1459 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6960 mm (ascending conveyor)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): Ø = 81 mmBelt: Type  ...

Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Deflection roller (UR): Ø = 34 mmDriv ...

Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 4820 mmFra ...

Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 3900 mmFrame widt ...

Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 640 mmFram ...

Transnorm belt curve conveyor right GKF 22.5°-850-650 IR1200 RA1523 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data:Conveying length middle radius (NL): 726 mmFrame width (NB): 850 mmbelt width (GuB): 650 mmheig ...

Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 759 mmFrame  ...

Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 766 mmFrame w ...

Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 680 mmFrame  ...

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data:Conveying length middle radius (NL): 1100 mmFrame width (NB): 770 mm with Motor 940 mmbelt  ...

Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 1650 m ...

Transnorm belt curve conveyor 90° degree right GKF 90°-750-550 IR600 RA1408 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 1805 mmFrame width (NB): 750 mmbelt width (GuB): 550 mmheight (BH): 210 mm Inner radius (IR): 600 mmCon ...

Transnorm belt curve conveyor left GF50°-740-550 IR700 RA1948 Technical data: Conveying length middle radius (NL): 851 mmFrame width (NB): 750 mmbelt width (GuB): 550 mmheight (BH): 200 mm Inner radius (IR): 700 mmConveying angle: 50° degreessupport feet: optionally availableConveying speed (V m/s): 0,045-1,3m/sDrive: SEW gear motor Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1belt: double layer, green, smoothYear of construction: 2001 Optionally available:Supports:Side guide one- and both sideds Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001condition: good (used)Nominal / inner radius in mm: 700Nominal / outside width in mm: 740Belt width in mm: 550angle: 50°Driven: YESRunning direction: LINKSEngine type: SEW EurodriveKW: 0,55/S1Ampere: 1,60Conveyor speed m / s: 0,8scope of delivery: without supports and s ...

Transnorm belt curve conveyor 90° right GKF 90°-800-600 IR600RA2218Technical data:Type designation: Belt curve conveyor TS 1600-105Frame width (NB): 800 mmBelt width (GuB): 600 mmOverall height (BH): 210 mmInner radius (IR): 600 mmConveying angle: 90° degreesConveying speed (v m/s): 0.5Drive: SEW geared motor R17 DT71D4Electrical data: 50Hz V380-500, kW 0.37 / S1Belt: double-ply, green, smoothYear of construction: 2001The position of the motor may differ from the photos (inside / outside / below). Please specify if it is relevant for you.Optionally available:SupportsSide guides withFrequency inverter adjustable up and downPrices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 WürzburgFeatures: Construction year: 2001condition: good (used)Nominal / inner radius in mm: 600Nominal / outside width in mm: 800Belt width in mm: 600angle: 90°Driven: YESRunning direction: R ...

Transnorm spiral helix belt curve conveyor right GKF 90°-775-600 IR500 RA2009 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105Frame width (NB): 775 mmbelt width (GuB): 600 mmheight (BH): 210 mm Inner radius (IR): 500 mmConveying angle: 90° degreesIncline: 210 mm / ...

Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 759 mmFrame ...

Transnorm curved belt conveyor left 35°-780-600 IR600 RA1825 Make: TransnormRunning direction: 35° left runningbelt conveyor width (RB): 600 mmNominal/outer width (NB): 780 mmInner radius (IR): 600 mm 3x 300-500V Height frame: 280Scope of delivery:with motor, without supports (please enquire if required)Features: Construction year: 2001condition: gutNominal / inner radius in mm: 600Nominal / outside width in mm: 780Belt width in mm: 600angle: 35°Driven: YESRunning direction: LINKSEngine type: SEW Eurodrivescope of delivery: without supports and side guidesFor individual, expert advice, simply get in touch with us.Simply contact us by phone or email.We will be happy to help you plan and implement your projects.We look forward to hearing from you.With kind regardsYour team at Dr. Sonntag GmbH & Co. KGYour specialist and contact for intralogistics