subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 201)
DSB Singlehead NG XM / DSB 350 series Rated power of the main drive 32 kW Connection voltage 3 AC 400V / 50 Hz 3 AC 480V / 60 Hz 3 AC 575V / 60 Hz 3 AC 210V 50 / 60 Hz Max. cutting width 350 mm Band saw blade tension servo-pneumatic Band gear adjustment (band gear visible in the sight glass) Automatic adjustment of the belt run Feed speed, continuously adjustable (depending on Depending on the type of wood and dimension of the block) Standard feed rate: from 4 to 20 m/min Precision feed rate: from 1 to 15 m/min High-speed feed: from 8 to 45 m/min Band saw speed, infinitely adjustable Up to 60 m/s Diameter of band saw guide discs of band saw 915 mm Adjustment of band saw cutting height From 1.7 to 165 mm Band saw blade guide with increased durability Durability Carbon guide Compressed air connection Working pressure 7 bar Water connection 1/2 Cdooj7rci Required su ...
SPECIFICATIONS: Cutting dimensions mm: 4200 x 2050 Saw blade diameter mm: 250 Installed capacity KW: 4.0 Complete with workpiece roll ... más información
Striebig Standard III 6220A Disconnecting Machine It is not clean, but it is in perfect condition because we have used it very little here. It has 6 m ... más información
Cml PS 600 Band Saw. Band saw in good condition. Located in Italy ... más información
Pivoting cross-cut and mitre saw Graule Eisele LMS II with roller support table for wood, aluminum and plastics., cutting height: about 120 mm, cutting width: approx. 80 mm, Roller conveyor length: 350 cm each ... más información
The trimming saw or panel saw Altendorf type F45 is a circular saw with a sliding panel for sawing wood and similar materials with an electrically adjustable and swiveling saw blade, digital display and scorer. In addition, the machine has pneumatic hold-down devices for convenient one-person operation., cutting height: tba, cutting length: 3.200 mm, cutting width: 1.300 mm, saw blade ø: 450 mm, engine: 5,5 kW, Vorritzer: 0,75 kW
We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. sliding table saw FORMAT4 Kappa 400 x-motion S/n 605.09.011.16 Year of construction 2016 Manufacturer: Felder Austria Cutting length 2800mm X-Roll sliding table ( 10 years warranty ) Cutting width 1200mm Boom table 1500 mm with cut-to-length fence 3200 mm Cut-to-length fence 3200 mm, swivel 90°–45°, 2 stop jaws Control x-motion CNC engine control with LCD screen 5.7" (145 mm) in overhead control panel Positioning control for saw blade height Positioning control for saw blade angles Automatic cutting height correction when panning Circular saw blade speed indicator Positioning control for rip ...
Professional saw for cutting large materials -cutting width 4200mm -cutting height 95 mm -machine dimensions: width-6450 height-2100 length- 12300 -rear automatic loading -automatic material rotation -associated cuts -air tables 4 pcs -pneumatic disc change 380mm discs pre-cut 180mm -wheels 4500/min -electronic adjustment of cutting and pre-cutting height -optimization program -power of main motor 17,2 KW -total power input 24 kW -400V -year of manufacture 2012 The machine is continuously serviced and the following parts have been replaced: - servomotor of the main disc - servomotor of the pre-cutting - ball screws of the saw unit guide - 4 pcs of frequency converters - Replacement of air handling tables - Replacement of belts, valves, stops, end sensors, cables, cable lines, oil, etc.
- chainsaw REINHARDT NC 800 H ECONOMY LINE _ suction cup JOULIN REINHARDT NC 800 H crosscut saw cutting width 800mm computer for flow optimization saw motor 6.3 kw -blade diameter 500 mm variable feed speed 120m/min max - power 3.5 kw hydraulic power unit 1.5 kw motorized infeed rollers 2x5000mm 2 cutting positions: wide 800mm - narrow 150 mm right or left ejector rollers 2x2500mm total line length 17m VENTOUSE JOULIN 500TS on heavy-duty HEB 260 gantry crane 6.30X6.30M 2 gripping stations machines available
Cut-off band saw Canali Type: HBSG Saw roller diameter 1000 mm Cutting height approx. 500 mm Motor approx. 11 kW hydraulic feed table incl. some saw blades well-functioning condition ... más información
Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317
Kälin type KA 250 multi-blade circular saw for sawing, trimming, ripping or grooving boards with accessories and laser., chain width: 250 mm, cutting height: Max. 100 mm ... más información
Cross-cutting saw or pendulum saw Pfeiffer type EP-125 with stable roller conveyor., cutting height: 150 mm, cutting width: 450 mm, Roller conveyor length: 2.5 + 3.5m ... más información
Saw blade swivel: 45 °, carriage length: 3200 mm, cutting width: 1300 mm, motor power: 5.5 kW, saw blade diameter: 450 mm, machine weight, approx. 1000 kg, scoring unit, motor brake, eletr. Dissimulation. ... más información
From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm ... más información
SPECIFICATIONS: Flywheel diameter: 700 mm Installed power: 3.0 KW Voltage: 380 volts Complete with saw blades ... más información
cutting width: max. 330 mmCutting height: max. 150 mmSaw blade diameter: 550 mmMotor output: 7,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 550 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 220x150/330x50 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 7.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations and e ...
cutting width: max. 610 mmCutting height: max. 150 mmSaw blade diameter: 600 mmMotor output: 9,2 kWturning speeds: 2750 U/minRequired air-pressure: 7 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 770x1385x1370 mmSALVAMAC Legend 600 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 420x150/520x100/610x30 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 9.2 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibration ...
cutting width: max. 375 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 500fast semi-automatic chop saw-------------------------------------------------- -Maximum cutting areaOption A: 220x125/310x50mmOption B: 350x80/375x50mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 5.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations an ...
Optimization cross-cut saw Dimter type OptiCut 150 for full optimization with chalk line detection and inlet and outlet., Technical specifications: tba ... más información