cepilladoras usadas para la venta

Heavy-duty single-sided planar calibration machine with ROTOLES system for demanding calibration of individual workpieces as well as for processing glulam panels.  ... más información

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Knife shaft below - as good as new Knife shaft on top - as good as new  ... más información

Knife shaft below as good as new Knife shaft top as good as new. Exhibit , as new  ... más información

Planing machine (automatic feeder + tools 6 pcs) + cross-cut saw + conweyors. Everything 100% new. Production date 2015. Production capacity aprox. 20 000 short cuts / shift. Adjustabel speed 6-36 m/min, feeder 300 - 1200 mm. ... más información

Saege bushins in various lashings in stock Copper mill DK 14 Copper mill DK 16 Copper mill DK 17  ... más información

Description: Chisel shaft: Helix shaft ø120 mm Chip removal: max. 8 mm main motor: 5.5 kW, serial number: 53,150,900, planing height: 4 - 300 mm, planing width: 530 mm, table length: 1,000 mm, turning speed range: 5,000 rpm, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,200 x 1,200 mm, weight approx.: 800 kg

Working width: 410 mmLength of the planing table: 2.600 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2.600 x 1.400 x 1.200 mmweight of the machine ca.: 561 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Working width: 410 mmLength of the planing table: 2.200 mmNumber of knives: 5 St.Motor output: 5 kWweight of the machine ca.: ca. 411 kg: Tersa : Ja Dust suction hood: 120 mmturning speeds: 5.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Working width: 520 mmWorking height: 300 / 3,5 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/18 m/min.weight of the machine ca.: 680 kgDust suction hood: 150 mm: Tersa turning speeds: 4.500 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Working width: 520 mmWorking height: 240 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/16 m/min.weight of the machine ca.: ca. 500 kg: Tersa : Ja Dust suction hood: 120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Feed gearbox LENZE GKS 07-3N i=11,378 / 123 min-1  ... más información

Feed rollers 310 mm steel smooth 1,200 EUR Feed rollers 310 mm steel toothed 1,900 EUR  ... más información

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin  ...

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head  ... más información

Description: Total processed length: 205,152 m Operating voltage 400 V Frequency 50 Hz Working width min. 10 mm (with tool diameter 125 mm) Workpiece width after processing min. 10 mm and max. 250 mm Working height min. 10 mm (for tool diameter 125 mm) Workpiece height after processing min. 10 mm and max. 160 mm Control: powerControl with Powertouch MOULDTEQ M-300 Feed: Feed system - 6 spindles Feed speed 24 m/min infinitely adjustable via powerTouch Feed speed min. 6 m/min and max. 24 m/min Maximum tool weight 22 kg with CE certificate and documentation without tools1. spindle: 7.5 kW, 2. spindle: 7.5 kW, 3. spindle: 7.5 kW, 4. spindle: 7.5 kW, 5. spindle: 7.5 kW, 6. spindle: 7.5 kW, serial number: 0-254-11-2760, planing width: 250 mm, planing height: 160 mm, length of surfacing-table: 2,500 mm, number of spindles: 6 pieces, feed: 24 m/min, Approx. Onsite Dimension. (l x w x h): 4,800 x ...

-Feed roller at the top -example-link feeder roller REX HOMS 860 price EUR 2700.- -Spare part for REX planing machine, expert and fast  ... más información

Working width: 530mm, planing height: 3-300mm, four-blade shaft diameter: 125mm, max. rotational speed: 5000/min, max. chip removal: 8mm, feed: 8/16m/min, motor power: 5.5kW, length: 1200mm, width: 1200mm, height: 1400mm, weight: 680kg, with electric table height adjustment, two adjustable rollers in the thicknessing table and handwheel with digital display for fine adjustment.

Description: The machine was only started for tests - maximum of 30 minutes. The test was made without any loads (wood) There for the item is brand new! serial number MP200/S/006/2020 , a reliable planer with a width of 410 mm Logosol DH410 has a lot in common with our PH260. The machine is built on the same principles and most of its components are the same as PH260’s, which means that it is a very sturdy machine with a cast-iron machine table and separate motors for each cutter and the feeder. Both the machines also have the same type of knives and cutter heads. The difference is that DH410 works with two cutters instead of four. Four-sided planing is made by running the board twice through the machine, while you only machine the board once when planing and dimensioning two sides up to a width of 310 mm and a height of 100 mm Improvements in the model 2 include: 2-sided planing/ ...

20-27-518 Reismusas WOODLAND MACHINERY (new) Type MOTO530 Max. Working width 530 mm Max. Working height 300 mm Max. Cutting depth 8 mm Engine 4kW/380V/50Hz Dimensions of the Working table 1050x532 mm Spindle rotation speed 4800 rpm Min. Working length 280 mm Knives 4-30x530x3 Electrical filing 0.5 kW Electric height adjustment 0.33 kW Feed speed 5-20 m/min Transport Dimensions Weight 835 kg