máquinas de producción de ventanas usadas para la venta

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (length / width): 4800 x 1600 x 2400 mmweight: 1500 kgGötzinger Power Drill Type BF 297With the Götzinger PowerDrill you can, depending on the type and design:Griffoliven drill on the loose frame part or for finished wings,with multi-spindle drilling head, quick-change, also for millingof the lock case for WK 2 or intermediate gearEcklager drill on loose frame part, with Mehrspindelbohrkopf,quick-change, corner-oriented over stop or custom made (tilt window)Drill vertically from above for fitting, pre-drill for clip on loose frame partMilling vertically from above for pushers, profile cylinders, 3-D hingesHorizontal drilling with 2 drilling units, different drilling diameters,Dowel drill front and long side, plywood / fighter, sprouts,Corner connection, front door etc.Milling horizontal ...

Length: 2700 mmWidth: 1100 mmHeight: 850 +- 150 mmengine output: 0,37 kWElectric capacity: 0,5 kwcompressed air: 6 barHorizontal impregnation system Pro flow for individual parts with rinsing circuit.---------------------------------Features:Machine for horizontal flooding of individual parts. The product will go throughflooded a row of nozzles. The excess product is then removed through air jetsblown off.The pump and the air nozzles are controlled automatically and only thenoperated when the workpiece passes through. In this way theCompressed air consumption reduced. The circulation operation ensures minimalproduct consumption.---------------------------------Construction features:structureSturdy steel frame, painted with high-strength, water-soluble products.Machine body made of heat-sealed, thick polypropylene plates.4 independent chambers for inlet, flooding, blow-off and outlet.Hori ...

System: 68/78/88 IVNumber of tools: - St.Bore: 50 mmWindow tools Oppold IV 68/78/88 woodWindow tools Oppold IV 68/78 wood-aluminiumran on Weinig Unicontrol6 with fixed strokes----------------------------------(Technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 4400 mmprofile spindle: 1 Stückmain drive: 19,2 kWCNC machining center MASTERWOOD 4 WIN with automatic loading and unloading--------------------------------------------Specially designed for a rational and flexible wooden window u.door productionHIGHLIGHTS:- Various tool magazines for optimal tooling- Simultaneous feeding with up to 6 workpieces- patented clamping system for optimum machining of workpieces- CNC controlled work table with automatic positioning of the beams andStretcher- Automatic reclamping for changing between external and internal profiling- INTEGRATED windowing software, i. Machine does not have to (but canOf course) be controlled from the office with external industry software.- powerful engine with 19.2 kW HSK-63 E- Loading and unloading conveyorAsk for a quote and see for yourselfunbeatable value for money!VIDEO from the machine attached!At t ...

Number of milling spindles: 2 St.fence: 1 jaworkpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...

System: 68/78 IVNumber of tools: - St.Bore: 50 mmOertli window toolsIV 68/78 woodIV 68/78 wood-aluminiumbeen in useon Weinig Unicontrol 6 with CNC spindlesYou are welcome to receive the complete window sections and tool drawingsInquiryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. tool diameter: , mm0: , mmoperating pressure: , barfilling amount: 52 lQuicksonic QS 520------------------Ultrasonic cleaning device with lid and work basketUsable dimensions: L 500 x W 400 x H 260Usable basket dimensions: L 444 x W 364 x H 224Content: approx. 52 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (L/W/H): 6100x1500x2300 mmWeight: 950 kg1 NEW drilling and milling center Götzinger Power Drill 300With the Götzinger PowerDrill you can, depending on the type and design:- Drill on the front and on the long side- Dowels of front doors, pegs, fighters- The drilling patterns are freely programmable- You can drill: handle slides and corner bearings, with quick-change multiple spindle- You can: Milling lock case, pusher and PZ as well as 3D belts and drill- The machine has a horizontal and a vertical milling unit- A simple control lets you create drilling and milling programs, save and call againBase frame in sturdy design, covered with sheet metalTable top 1800 x 200 mmProcessing unit:X-axis - 500 mm working travelY-axis - 0-120 mmZ-axis - 0-105 mm (above table)Horizontal aggregates:1  ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig, PC-Nexus Weinig Unicontrol 12with radial and axial CNC spindles as well as VARIO table and milling carriage Machine can be seen in use for a short time!Technical data summary(please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable> Number of tools: 1 piece.> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser directional light to detect the saw section> Axial adjustment path 150 mm NC axis, electronically infinitely variable> Radial pneumatic adjustment path 8 positions for e.g. edge rounding from aboveRounding aggregate > Position: horizontally below> Motor power: 1.5 kW> Spindle diameter: 20 mm> Tool clamping length: 25 mm> Spindle speed: 9,000 rpm> Tool diamete ...

Number of motors: 2 Stück0: 2380 mmControl: , 0RUCHSER RU-GL-45°-----------------------------------------------------Glazing bead saw at the sliding work tableDeveloped for cutting glazing beads in pairs on the sliding work tableThe RU-GL glazing bead saw is mounted on a sliding work table withScanning and clamping device fortwo glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuckright saw on carriagemounted to be moved manually. Pneumatic clamping device from above and fromthe side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V.Sliding work table with felt pad, length with side shelf 3300 mm,Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerableCounter bearing for positioning the wings.Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000-----------------------------------------------------for glazing beads up to 30 x 70 mm (W x H) ! ...

Number of motors: 2 Stück0: 2650 mmControl: , 0Ruchser RU-GLS-ED 45° glass bead saw--------------------------------------Developed for cutting glazing beads in pairsThe RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. theMachine was designed for cutting glazing beads in pairs with acutting angle of 45° and features a fixed and amovable saw unit. The manual length adjustment is equipped withan electrical digital display. It can cut lengths from 240mm - 2650mmbe sawn. During the cutting process, the glazing beads with apneumatic clamping device clamped from above and from the front to prevent tiltingto prevent the glazing beads. Operation is via a safetytwo-hand operationItem 1: RU-GLS-ED45° double glazing bead saw-----------------------------------------------------with manual measurement, for the pairwiseCutting glazing beads, cutting angle 45°.Manual length  ...

0: 3.700mm, 5.100mm, 6.100mm mmWorking height: 160 mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Working width: 4500 mmWorking height: 3000 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5600x1350x3550 mmWeight: 3000 kgS&S frame press Bavaria 2000 L---------------------------------With automatic pressing cycle + manual controlfor corner connections tenon+slots and dowel connection/caulked tenon,Can be changed via selector switch on the control cabinet.With basic equipment for optional use of counter profiles if the sash is onloose part can be folded over.CE versionBasic machine in the strongest welded frame construction,with thick-walled special hollow profiles.Guideways of the pressure beams for the press cornersin a low-abrasion machined version.Fast, smooth, manual width adjustmentthanks to ball bearing carriage, fixation in 50 mmHole grid, optional motorized width adjustment withwith hydraulic clamping (for an additional charge).Height adjustment and pressing using long-stroke  ...

Working width: 3648 mmWorking height: 2485 mmNumber of cylinders: 6 St.Maweg Euronova Quickomat frame press----------------------------with automatic measurement adjustment.Cylinder max. opened (maximum working dimensions)W 3,648mm x H 2,485mmTotal length: 4,720mm + 400mm control unitTotal height: 3,550 mm(technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. tool diameter: 400 mm: 180 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

max. tool diameter: 400 mm: 310 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

Length: 5000 mmWidth: 750 mmHeight: 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max. workpiece length: 4500,6000 mmprofile spindle: 3 Stückmain drive: 24 kWControl: Siemens 840d Working Process Logos Life Evo XS 2345-------------------------------Vollautomatisches CNC-Fensterfertigungsanlage mit automatischerBe- und Entladung.2 Portale mit 3 Frässpindeln mit 4- und 5-AchstechnologieCNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität undProduktivität128 WerkzeugplätzeNEU:Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie fürkleinere Betriebe!Nebenstehend finde Sie aktuelle Videos dieser Baureihe.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung------------------------------------------------------ ----------komplett wie folgt :- Fahrbare Ausführung- Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert.- 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung- Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet- pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen fürnur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm.Dübellänge : min. 25 mm. – max. 60 mm.Tiefeinsetzen = 30 mm.Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung fürelektronische Dosierung in Verbindung ist, gespritzt .- Flexibler Arm mit Gegengewicht zu ...