Fabricante:
(Categoría: 203)
4-sided planer Fabr. Vinous Type U 23 E blue class YOC 2001 with 6 spindle + horizontal sawing unit 1 Sp. U-5,5 Kw 2-3 Sp. R/L 7.5 Kw 4 Sp.R 5,5 kw 5 Sp. Ø 7,5 Kw 6 Sp. U 5,5 Kw 7 horizontal sawing unit 2.2 kw (glazing bead saw) with button pressure yes-no Working width 20-230 mm Working height 8-120 mm Spindle 40 mm Feed rate 5-24 m/min 4 Kw Dressing table 2.5 m manuele waxilite pump two driven rollers in machine table
Spare parts for REX JUMBO and REX SUPERMASTER ... más información
Description: serial number: AB/146367 Technical specifications: spindle diameter 50 mm spindle height 180 mm height adjustment useful stroke 140 mm rotation spindle speed: 3000 / 4500 / 6000 / 7000 / 10000 maximumum tool diameter 250 mm table top dimensions 1200 x 730 mm height from base 925 mm voltage 400 V, 3 phases, 50 Hz, 12 A motor power 5.5 kW serial number: AB/146367, planing height: 180 mm, length of surfacing-table: 1,200 mm, spindle diameter: 50 mm, total power: 5.5 kW, packing measure approx (l x w x h): 1,200 x 730 x 925 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,300 mm, weight approx.: 600 kg
SPECIFICATIONS: Total length : 2200 mm Width: max. 410 mm 4 planing knives Dressing height: max. 200 mm Installed power 3 KW ... más información
I am selling an industrial planer LEDINEK ROTOLES 400 D-S. Built in 2001. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. material take-off 8mm Rotating Shaft 48 Knife Feed speed 10-45 m/min. Motorized thickness adjustment with digital display. Diameter of the extraction hood 200 mm (30m/sec. required) Main spindle motor 22.0 KW. Feed motor 3.0 KW. Total power 26 KW. Total weight 1800kg. European product, manufactured in the EU, with CE certificate and instructions for use. Machine in stock in Kežmarok, Slovakia, possibility to test.
Description: WEINIG moulder model PROFIMAT (260×180) FORTEC, in configuration for carpentry and laminated beam machining: - useful working dimensions 260x180mm - electronic control of 2 axes, SIEMENS SIMATIC OP7 programmer - cardanic drive and differentiated pneumatic pressure - variable feed speed 5 - 24 mt/min - feed motor KW 4 - HP 5.5 - upper feed unit before 1st shaft - lower feed unit after 5th shaft - machine table with air curtain - short infeed table 1050 mm - foot pedal lubrication pump - protection cabin - shafts D=40mm at 6000rpm - complete with tools D=120mm - Z=2 Shafts: 1- under kw 11 - hp 15 2- right 3- left (right and left with single motor kw 11 - hp 15) 4- above kw 11 - hp 15 5- under kw 7.5 - hp 10Approx. Onsite Dimension. (l x w x h): 2,300 x 2,000 x 1,900 mm, weight approx.: 2,200 kg
Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000m ...
Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards
– German production – year of manufacture 2002 –DTR TECHNICAL PARAMETERS: planing width 230 mm planing height 170 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW spindle diameter 40 mm electric height adjustment five steel top rollers four rubber top rollers pneumatic pressure table top length 1980 mm central lubrication feed adjustable on the inverter 6-26 m/min feed on cardan shafts feed motor power 4 kW connection diameter 140 mm machine dimensions (L/W/H) 520 / 210 / 210 cm weight 4000 kg
Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz ... más información
Description: • Moulder • Serial number 91450 • Total installed power 59.60 KW • Working width from 15 mm up to 230 mm • Working height from 10 mm up to 150 mm • Total table length 4930 mm • Entrance table length 2000 mm • 6 heads: below 7.50 KW - right 7.50 KW - left 7.50 KW - above 11 KW - above 11 KW - universal 11 KW • Spindles diameter 40 mm • Spindles rotation speed 6000 rpm • Feeding motor 3.80 KW • Variable feed speed from 6 m/min up to 24 m/min • Control  ,with digital reader for feed speed, width and height of the workpiece • Some accessories are includedApprox. Onsite Dimension. (l x w x h): 4,960 x 2,150 x 2,320 mm, weight approx.: 5,500 kg
Equipment/Specifications: Working width: max. 630 mm Knife shaft: Tersa, Ø 125 mm, 4 blades Planing height 2.8 - 250 mm max. chip removal: 8 mm Table length: 1,260 mm Table height adjustment: electric Feed speed: 6/12 m/min Feed rollers: made of rubber Motor power: 5.5 kW Speed 5,000 rpm Power ratings: 400 V, 50 Hz, 3~ Nominal current: 16 A Suction nozzle Ø 160 mm Weight: approx. 1115 kg Dimensions: 1,260 x 1,140 x 1,200 mm 1,800 mm with hood open All information is subject to the actual equipment!
High-performance industrial planing machine In good condition, lots of accessories ' ... más información
SPECIFICATIONS Pre-planer mm: 2000 Number of spindles: 5 Spindle configuration: I below - week 5,5 II - III right- left - KW 7,5 IV above - week 5,5 V below - week 4,0 Cardan shaft Speed-controlled drive KW: 4.0 Spindle diameter mm: 40 Revolutions per minute: 6,000 Max. working width mm: 230 Max. machining height mm: 120 Complete with: - Soundproof cabin - Grooved table -Tools CE-compliant
High-performance planer With chamf device good condition 223 kW Year of construction 2003 Many spare parts ... más información
Description: • 5-fold combined machine • Serial number KK/072448 • SURFACE PLANER: working width 350 mm, table length 1910 mm, spindle with 3 knives, spindle speed 5300 rpm, motor power 4 KW • THICKNESS PLANER: working width approx. 350 mm, table length 780 mm, maximum working thickness approx. 240 mm, feed speed 8 m/min • DRILL: maximum drill diameter 16 mm, table is missing • SLIDING TABLE SAW: max. saw blade diameter approx. 315 mm, shaft rotation speed 4000 rpm, carriage length 1900 mm, with saw scoring unit, tilting saw 0°- 45°, motor power 4 KW • SPINDLE MOULDER: spindle diameter 50 mm, max. tool diameter under the table 210 mm, max. tool diameter to tenon 275 mm, 4 speeds: 1400/3500/6000/8000 rpm, motor power 4 KWApprox. Onsite Dimension. (l x w x h): 2,000 x 2,600 x 1,200 mm, weight approx.: 800 kg
I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.
Planer WEINIG UNIMAT SUPER 4 – German production – very good condition – year of manufacture 2004 –DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools adjustable top head 1) bottom head 11 kW 6000 U/min 2) top head 18,5 kW 7000 U/min 3) bottom head 5,5 kW 6000 U/min feed motor 2,2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic pressure three upper fixed pulling rollers one rubber top roller corrugated top length of the pre-worktop 1950 mm total power 37 kW central lubrication Trzansport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg
Year of manufacture: 2004 Planner: High-speed Moulder/Planer Waco Maxi Working height: 14 - 150 mm Working width: 30 - 300 mm Complete moulder line with High-speed Moulder/Planer Waco Maxi and mechanization from Almab Planer/Moulder: - High-speed Planer/Moulder: Waco Maxi - Year of manufacture: 2004 - Feed speed: 30 - 350 m/min - Spindles: 7 Technical description: - Working width: 30 - 300 mm - Working height: 14 - 150 mm - Cutting circle: 180 - 260 mm - Combination: bottom/top/left/right/top/bottom/bottom - PLC system: Siemens - Weight: 16 500 kg
TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004