máquinas inyectoras usadas para la venta

Clamping force: 200 t Year of construction: 2007 Injection weight in PS: 127 g Injection unit: .../350 Screw diameter: 35 mm Spec. Injection pressure: 2500 bar Spray volume: 139 ccm Injection weight in PS: 127 g L/D screw ratio: 23 Clamping unit: 2000/... Clamping force: 200 t Size of clamping plates: 728 x 728 mm Lights spar spacing: 520 x 520 mm Ejector force: 66 kN Aperture travel: 650 mm Max. plate spacing: 900 mm Ejector travel: 225 mm Fuel tank capacity OIL: 290 l

Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m

Year of construction: 1987 Injection weight in PS: 24 g Control type: Dialogica Injection unit: .../45 Screw diameter: 22 mm Injection weight in PS: 24 g Clamping unit: 150/... Lights spar spacing: 170 x 170 mm Aperture travel: 200 mm Max. plate spacing: 350 mm Ejector travel: 75 mm ... más información

Clamping force: 320 t Year of construction: 2007 Injection weight in PS: 131 / 131 g Injection unit: .../800 / 350 Screw diameter: 35 / 35 mm Spray volume: 139 / 139 ccm Injection weight in PS: 131 / 131 g Clamping unit: 320/... Clamping force:: 320 t Lights spar spacing: 720 x 720 mm Tool installation height: 300...1400 mm Ejector travel: 250 mm General information: Delivery Time: Natychmiast Weight: 17,000 kg Dimensions(m) LxWxH: 6.83 x 2.25 x 2.50 m Instrumentation: 1 x 8-speed water battery 1 x 12-speed water battery 1 x 4-way water battery 3 x hydraulic core pull control 4 x Air Valve Robot interface according to EUROMAP 67

Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions(m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x Hydraulic Core Pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm

We have an injection molding system for sale • Netstal Synergy 3500-2700Ε year 2007 machine • incl. Closing Mold 72Cavity 29/25 cap 1.32gr.with /3,5sec. cycle /year 2016 Plastisud • Hot runner year 2016 Plastisud • Controller Custom made • Belts • Packaging unit 5-1-5 The machine is in production in Greece until the end of March 2024 and will be available for sale in May 2024.

Description: Serial number 171 - 101 Model M 171 Designation EUROMAP 800H - 160 Maximum power 50 kW - 400 V - 50 Hz Rated current 75 A Interrupting capacity <,10 kA  ,Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 5,000 kg ... más información

 ... más información

screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:1250 kN ... más información

This ENGEL Victory 2050H/650v/350 Combi injection moulding machine was manufactured in 2015. It boasts significant capabilities with a clamping force of 350 tons and an injection pressure of 1480 bar. The machine offers a maximum injection volume of 808.17 cm³ horizontally and 294.52 cm³ vertically, enhancing its versatility. Additionally, it is equipped with special accessories like Valves + control, an Index plate, and a Viper robot 40 for automated removal. Reach out for more information about this injection moulding machine.

This HAITIAN MA 7000/6800 injection moulding machine was manufactured in 2011. It features a robust injection capacity of 3228 grams and an impressive maximum injection pressure of 1860 Bar. The machines mold clamping force reaches up to 700 tons, supporting mold thicknesses from 400 mm to 940 mm. The spacing between tie bars is a generous 1840 mm. Consider the HAITIAN MA 7000/6800 machine we have for sale. For more information about this injection moulding machine, please reach out to us.

KRAUSS MAFFEI KM 125-520C1 (1998) Clamping force: 1250 kN Mold opening force: 70 kN Traversing force opening/closing platen: 35/28 kN Clamping platen (hxv): 745 x 770 mm. Clear width (hxv): 470 x 470 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 10 kN Injection unit: SP520 Screw diameter: 45 Ls/D Ratio: 20 Injection pressure: 1878 bar. Swept volume: 275 cm3 Shot weight PS: 250 gr. Injection flow: 159 cm3/s Screw speed. Standard/ZE: 307/391 1/min Plasticizing flow: 31/40 Pump motor rated output: 18.5 kW Installed heating capacity: 13 kW Control zones, barrel heating: 5 Dry cycles: 1900 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 6.000kg Length x Width x Height: 4.48 x 1.51 x 2.19 m. Max mold weight: 1485 kg. Plasticizing u ...

KRAUSS MAFFEI KM150-1000C1 (2000). Clamping force: 1500kN Mold opening force: 86 kN Traversing force opening/closing platen: 45/34 kN Clamping platen (hxv): 780 x 790 mm. Clear width (hxv): 500 x 500 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 22/10 kN Injection unit: SP1000 Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 532 cm3 Shot weight PS: 476 gr. Injection flow: 197 cm3/s Screw speed. Standard/ZE: 194/272 1/min Plasticizing flow: 35/49 Nozzle contact force: 110 kN Pump motor rated output: 30 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Dry cycles: 1800 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 7600 kg Length x Width x Height: 4.99 x 1.51 x 2.19 m. Max mold  ...

KRAUSS MAFFEI KM200-1400C1 (2001) MC4 control Clamping force: 2000 kN Mold opening force: 101 kN Traversing force opening/closing platen: 42 kN Clamping platen (hxv): 915 x 915 mm. Clear width (hxv): 560 x 560 mm. Mold opening stroke: 700 mm. Mold installation height min: 350 mm. Maximum daylight: 1050 mm. Ejector stroke: 200 mm. Ejector force forward/back: 28 kN Injection unit: SP51400 Screw diameter: 60 Ls/D Ratio: 21 Injection pressure: 2000 bar. Swept volume: 679 cm3 Shot weight PS: 618 gr. Injection flow: 325 cm3/s Screw speed. Standard/ZE: 259/368 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 23 kW Control zones, barrel heating: 5 Dry cycles: 1400 (Euromap 6) Oil filling: 525 l. Dimensions: Net weight with control cabinet: 10.500kg Length x Width x Height: 5.69 x 1.90 x 2.24 m.  ...

KRAUSS MAFFEI KM250-1000C1 (1998) Clamping force: 2500 kN Mold opening force: 160 kN Traversing force opening/closing platen: 86 kN Clamping platen (hxv): 995 x 1050 mm. Clear width (hxv): 630 x 630 mm. Mold opening stroke: 820 mm. Mold installation height min: 330 mm. Maximum daylight: 1150 mm. Ejector stroke: 200 mm. Ejector force forward/back: 58 kN Injection unit: SP1000C Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 523 cm3 Shot weight PS: 476 gr. Injection flow: 428 cm3/s Screw speed. Standard/ZE: 65/80 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Oil filling: 720 l. Max mold weight: 3430 kg. Dimensions: Net weight with control cabinet: 12.500kg Length x Width x Height: 5.97 x 1.04 x 2.36 m

This ENGEL e-victory 740H/50W/220 combi + Viper 20 injection moulding machine was manufactured in 2016. It features dual injection units with maximum injection rates of 279.45 cm³/s and 103.67 cm³/s respectively, and high injection pressures up to 2400 bar. The clamping force is robust at 2200 kN, with a generous platen size for diverse mold sizes. Consider the ENGEL e-victory machine we have for sale. Contact us for more information about this injection moulding machine.

 ... más información

Description Electric charge Working hours: 6.300 ... más información

 ... más información

 ... más información