máquinas inyectoras usadas para la venta

Inv. Num. : 6167 Type: GUIDANCE LWF 1300 -SV Producer: Leadway Created: 2016 Parameters: Clamping force: 130 t Screw diameter: 35 mm Distance between stands: 470x420 mm Ejector force: 45 kN Screw stroke length: 120 mm Mould height: 450 mm speed: 320 1/min Machine length: 4900 mm Machine width: 1400 mm Machine height: 1850 mm Spray weight: 5300 kg

Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable  ... más información

B&A REF: 9017 TON: 180 SHOT WEIGHT: 360 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 760 X 760MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 600MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 150MM CONTROLS: CC 200 AIR VALVES: 1 HEATING CAPACITY: 15.3KW ROBOT INTERFACE: EUROMAP 67

B&A REF: 9001 TON: 160 SHOT WEIGHT: 260 SCREW DIAMETER: 40MM STROKE VOLUME: 285CM3 INJECTION PRESSURE: 2100AR PLATEN SIZES: 780 X 740MM DBTB: 510 X 450MM MIN MOULD HEIGHT: 170MM MAX MOULD HEIGHT: 550MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1010MM EJECTOR STROKE: 200MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 19 HEATING CAPACITY: 12KW SCREW DRIVE: HYDRAULIC

B&A REF: 8827 TON: 120 SHOT WEIGHT: 211 SCREW DIAMETER: 40MM STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 800MM EJECTOR STROKE: 125MM CONTROLS: ORION CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9.3KW SCREW DRIVE: HYDRAULIC

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

WELLTEC TTI 450 FH injection moulding machine was manufactured in 2008 in Hong Kong. The machine of rigid steel construction, is ideal for the mass and unit production of plastic products. Plastic of sufficient plasticity is fed into an injection mould of minimum dimensions (L x W) of 125 x 125 mm, which is then clamped with a high force of up to 450 tonnes. The high clamping force and the reliable components used in the machine ensure that the user receives products of the highest quality and that productivity and efficiency are significantly increased. The WELLTEC 450 T injection moulding machine is also equipped with a CNC controller for the input and editing of all the necessary machining parameters. The total weight of the machine is 17600 kg. Technical data of the plastic injection moulding machine WELLTEC TTI 450 FH - CNC controller - maximum clamping force: 450 t (4500 kN)  ...

WELLTEC TTI 450 FH injection moulding machine built in 2008 in Hong Kong, is distinguished by its high clamping force of up to 450 tonnes and efficient high-end components. The machine designed for plastic processing uses the injection moulding method, which involves feeding plastic of suitable plasticity into an injection mould of minimum dimensions 125 x 125 mm and then clamping it with high force. As a result, high quality products are obtained in a very short time. The WELLTEC injection moulding machine has a steel structure, inside which are installed state-of-the-art components to maximise overall productivity and efficiency, and to ensure reliable operation of the injection moulding machine for many years of use. On the arm there is an operator panel with a convenient and easy-to-use CNC controller, with which the operator can enter and edit all the possible parameters of the p ...

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine, manufactured in 2003 in Germany, is used in the processing of thermoplastics by injection moulding. The robust steel construction is equipped with first-class components, characterised by high reliability and performance. The FERROMATIK MILACRON EE155 machine works with injection moulds with a height between 200 and 590 mm, which are mounted on 780 x 780 mm platens and closed with a force of up to 155 tonnes. The combination of the high closing force with a 45 mm diameter screw, rotating at 250 rpm, guarantees the best quality of the produced products. The total weight of the injection moulding machine is 7800 kg. Technical parameters of the FERROMATIK MILACRON ELEKTRA 155 injection moulding machine - clamping force: 155 t (1550 kN) - screw diameter: 45 mm - maximum screw speed: 250 rpm - screw stroke: 200 mm - mould ...

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...

ENGEL ES 330/80 HLS injection moulding machine built in 1998 in Austria is designed for processing plastics by injection moulding. The injection moulding machine is equipped with top-quality components that increase productivity and efficiency. All parameters are conveniently programmed on the ENGEL CNC control installed on the machine body. The plastic processing machine weighs 4900 kg. Technical specifications of the ENGEL ES 330/80 HLS injection moulding machine - CNC controller: ENGEL - clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum screw speed: 400 rpm - minimum screw speed: 20 rpm - injection pressure: 1600 bar - injection speed: 113 mm/s - minimum mould height: 200 mm - maximum mould opening stroke: 450 mm - mould mounting platen dimensions (L x W): 660 x 560 mm - maximum distance between platens: 650 mm - mould mounting hole dimension (fixed plate) ...

ENGEL ES 200/75 HL-V injection moulding machine was built in Austria in 2000. The highly reliable and robust machine is designed for processing plastics by injection moulding. The high-end components installed on the ENGEL ES 200/75 HL V injection moulding machine guarantee a significant increase in work efficiency and productivity. The machine operating with a force of 75 tonnes works with injection moulds of a minimum height of 200 mm, which are placed on 660 x 560 mm platens. All process parameters are programmed and controlled on the convenient and intuitive ENGEL CNC control, located on the body of the plastics processing machine. The total weight of the machine is 4700 kg. Technical specifications of the ENGEL ES 200/75 HL-V injection moulding machine - CNC control: ENGEL - clamping force: 75 t - injection volume: 135 cm3 - injection pressure: 1065 bar - injection speed: ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...

ELWIK RT-C hot runner control system is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The advanced technology and safety features included in the device guarantee uninterrupted and reliable operation of the mould temperature controller. The P, PI, PID parameters are set automatically by the temperature controller to the injection moulding machine, thanks to an auto-adaptation function that ensures that the pre-set temperature is not exceeded. The heater is dried when the supply voltage is reduced, completely protecting it from burning out. The mould temperature controller is equipped with six heating zones with a 16 A load per zone, making it possible to process any type of plastic. Technical specifications of the ELWIK RT-C ...

PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in 2005, is used in the process of processing thermoplastics by injection moulding. The characteristic feature of the machine is a two-plate hydraulic mould closing system with attached closing cylinders, working with a force of 25 tons. The machine’s screw with 22 mm in diameter rotates at a speed from 10 to 370 rpm and is driven directly by a hydraulic motor. The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows for high automation of the injection process with setting and control of the injection parameters from the control panel located on the body of the machine. The injection moulding machine is offered with a wide range of equipment, including a plastic feeder and a MITSUBISHI E600 HMI panel. Total weight of the machine is 1470 kg. Characteristics of PONAR ŻYWIEC UT-025 H injection moulding ...

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...