máquinas para el estiramiento y soplado de moldes usadas para la venta

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002  ... más información

year of construction 2002 - completely refurbished in 2021 Extruder 45 mm, 22 D Control Beckhoff new pinola head new wall thickness control new hybrid pump Denison were installed. The machine was running 50 h since the refurbishing, and is as new. Further informations on request!  ... más información

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition  ... más información

Used molds, in good condition. Available ex stock  ... más información

Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition  ... más información

used double head, with WDS adjustment, in good condition. Stitch 125 mm, nozzles up to 55 mm.  ... más información

Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged  ... más información

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system  ... más información

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds  ... más información

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds  ... más información

6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit  ... más información

Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition!  ... más información

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour  ... más información

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.  ... más información

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.  ... más información

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit  ... más información

Manufacturer | Manufacturer: Uniloy Machine Type | Machine type: BWF 16 E Stations | Stations: Single Station | Single station Year of construction | Built: 2004 – overhauled in 2019 | 2004 – refurbished in 2019 Location | Location: Germany | Germany Clamping force | Clamping force: 160 kN Control Type | Control system: Beckhoff Extruder | Extruder: S 90/24D Extrusion Head | Extrusion Head: Single Head PWDS | Single head PWDS Mold dimensions mm | Mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 520 x 520 x 2x180 Bottle Volume Max. | bottle volume max.: 15 L Screen Language | Monitor language: German / English | German / English Operating hours | Working hours: approx. 3000 | Around 3000 Accessories | Accessories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: ...

Head type: 3-SH/60-125-PE/T (DeCo) ​Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No  ... más información