máquinas inyectoras usadas para la venta

Krauss Maffei KM 110-700 C2 Year of construction: 1998 Injection unit: Screw diameter: 45 mm Spray weight: 278 g Injection pressure: 2336 bar Dosing volume: 305 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Parallel Movements Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) The machine was regularly serviced by the authorized service Krauss Maffei in Switzerland Metrics: Weight: 6200 kg Length/Width/Height: 4.66x1.51x2.19 m Drive: Pumps/motor: 18.5 ...

Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...

Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S robot / hybrid machine / operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 45 mm Spray weight: 289 g Injection pressure: 2336 bar Dosing volume: 318 ccm Clamping unit : Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touchscreen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nit ...

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of construction: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touchscreen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air Valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor, which is controlled by an inverter – very precise Automatic part feeding with quality control system Machine workstation protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...

Engel e-victory 170/80 Ecodrive / production line with the robot Engel Viper 20 / hybrid machine Year of construction: 2017 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 22,581 h Euromap 67 Robot Interface Air Valves Hydraulic core pull x 2 Control with hot runners Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Parallel Movements  ...

Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...

Engel Insert 80V/80V/100 2F/2-K Tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared Protective Curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine was regularly serviced by the authorized service Engel in Germany Metrics: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started by our serv ...

Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...

Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel Del ...

Engel Victory 200H/60W/180 combi / production line with the robot Engel Viper 20 Year of construction: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: 2K machine with the original robot Engel Viper 20 Tie-bar-less machine, hybrid: energy-saving, high-revving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Hydraulic Core Pull x 6 Hot runner control x 36 Reinforced Injection Units - Bimetal The second injection unit is angled, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main Motors - 2 x Servo Motor Controlled with Inverter Proport ...

Engel Victory 1060/180 Ecodrive / hybrid machine / operating hours: approx. 11,000 in automatic mode Year of construction: 2019 Injection unit: Screw diameter: 55 mm Injection weight: approx. 495 g Spray pressure: 2000 bar Dosing volume: 523 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 11,000 in automatic mode Total number of operating hours: 16,350 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Proportional ...

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 26,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 26,000 in automatic mode Total number of operating hours: 30,323 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Wittmann Battenfeld MicroPower 5/7.5 / Electric motor / Operating hours: approx. 300 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 14 mm Injection weight: approx. 2.5 g Injection pressure: 2500 bar Dosing volume: 3 ccm Clamping unit: Clamping force: 5 t Size of clamping plates: 240x400 mm Ejector: electric Control: UNILOG B6 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Built-in vacuum pump from the Becker brand Automatic height adjustment of the injection unit Metrics: Weight: 1370 kg Length/Width/Height: 2.09x0.97x2.50 m Drive: Heating capacity: 2.45 kW A ...

Battenfeld Plus 350/75 Year of construction: 2007 Injection unit: Screw diameter: 25 mm Injection weight: 44.6 g Injection pressure: 1575 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B2 Additional equipment: Air valve x 1 Metrics: Weight: 1000 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Battenfeld Plus 350/75 Year of construction: 1996 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Battenfeld Plus 350/75 Year of construction: 1997 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Euromap 12 Robot Interface Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Battenfeld HM 45/60S / Machine in very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 30 mm Injection weight: 20.8 g Spraying pressure: 1100 bar Dosing volume: 22.9 ccm Clamping unit: Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 37,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating capacity: 3.3 kW Total power: 14.3 kW All offered machines are started by our service  ...

Battenfeld HM 45/60S with the Wittmann W702 sprue picker / machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 30 mm Injection weight: 31.1 g Spraying pressure: 1100 bar Dosing volume: 34.2 ccm Clamping unit : Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Control Panel Additional equipment: Machine in very good technical condition Operating hours: approx. 39,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection It is possible to buy the machine with the Wittmann W702 sprue picker for additional payment Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x ...

Wittmann Battenfeld Smart Power 90/350 / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 35 mm Spray weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 90 t Tie bar spacing: 470x420 mm Size of clamping plates: 680x660 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 24,000 in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Proportional valve on the injection unit – precise injection It is possib ...