Fabricante:
(Categoría: 1403)
Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 500 kg -Documents: crane inspection book, operating instructions, -Base plate: Ø 710 mm -Projection: 3045 mm -Total height: 4,075 mm -Hook height: 3,305 mm -Chain hoist: DEMAG type DKUN5-500KV1F4 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Chain length: 3300 mm -Transport dimensions: 3850/810/H1110 mm -Own weight: 720 kg
Cantilever rack, heavy-duty rack-Cantilever rack: base field double-sided, 2 uprights-Cantilever arms: 4 per side, length 500 mm-Compartment height: variably adjustable-Quantity: 2x shelves available-Price per piece-Dimensions: 1180/1195/H2960 mm-Weight: 139kg / 140kg ... más información
P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, blea ...
Heavy Duty Transport Chassis, Armoured Castor, Heavy Duty Castor, 4 pcsPAGUS350 x 300 x 67 mmMinimum height: 67 mm bearing surface (machine): 350 x 300 mmMounting thread: M16 x 2.0 / M20 x 2.5 ( in the steel plate )2x Bore in the frame: Ø 20 mmMaterial thickness: 6 mm ( contact surface ), 15 / 30 mm ( frame )Number of rollers per chassis: 4 pieces Roll diameter: Ø 45 mm Roll length: 120 mmWeight: 20.5 kg per chassisOther quantities on request !as good as new !Dimensions ( single chassis ): 350 x 300 x 67 mmDimensions (packaging): 800 x 400 x 310 mm
: Leimholzplatten number: zahlreich, 2 Größen height: 15 cmsize of pallet: 160 x 124 cmsize of pallet: 105 x 120 cmfloor-plate height: ca. 37 bis 45 mmcondition: trocken, sehr stabil The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 1000 kg year of manufacture 1985 -Documents: crane inspection book, operating instructions, -Base plate: Ø 685 mm -Projection: 4,390 mm -Total height: 4,350 mm -Hook height: 3,140 mm -Chain hoist: DEMAG type PK5N with main stroke 5 m/min, built in 1973 -Chain length: 3300 mm -Transport dimensions: 950/4630/H1890 mm -Own weight: 1160 kg
Industrial vacuums, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet and dry vacuums, liquid and chip vacuums-Manufacturer: Ringler, liquid and chip vacuum-Type: RI 300 W2E-Connection: 230 volts-Power: 2.6 kW-Speed: 15000 rpm-Number: 1x industrial vacuum cleaner available-Dimensions: 800/720 / H1420 mm-Weight: 72 kg
Description: Dimensions per crate 400 x 300 x 230mmApprox. Onsite Dimension. (l x w x h): 400x300x230 (20pcs) mm, weight approx.: 45 kg ... más información
Description: without content , Please note that transportation is possible on standard trucks, but some welding points are separated for this purpose.Approx. Onsite Dimension. (l x w x h): 8,900 x 6,200 x 1,650 mm, weight approx.: 700 kg ... más información
Description: Contents: various screws, dowels, polishing disks, puller rollers Attention: without paints, varnishes and liquidsApprox. Onsite Dimension. (l x w x h): 1,220 x 500 x 1,100 mm, weight approx.: 300 kg ... más información
Description: Contents consisting of clamping devices such as anchors, screws, clamping plates (dimensions: 780 x 580 mm), a clamping table (table dimensions: 800 x 600 mm with 5 grooves) Please note: the disk sander on the shelf is not included in the scope of delivery Dimensions of the shelves: 1200 x 610 mmApprox. Onsite Dimension. (l x w x h): 3,100 x 700 x 2,000 mm, weight approx.: 500 kg
Description: Dimensions of the support surface: 1700 x 600 mm Max. load: 6000 kgApprox. Onsite Dimension. (l x w x h): 3,500 x 650 x 1,900 mm, weight approx.: 150 kg ... más información
Description: 1 x META, with 5 bays, shelf 1000 x 400 mm, installation dimensions 5000 x 450 x 2500 mm 1 x MITA, year 2013, shelf type MS-230 III, shelf load 230 kg, frame type T 2-N, installation dimensions 2600 x 800 x 2500 1 x SCHULTE, year 2018, shelf load 150 kg, bay load 1700 kgApprox. Onsite Dimension. (l x w x h): 2,500 x 800 x 1,500 mm, weight approx.: 200 kg
Description: Installation dimensions: 2700 x 1050 x 2500 mm, with 4 levels 2700 x 650 x 2500 mm, with 6 levels  ,without visible contentApprox. Onsite Dimension. (l x w x h): 5,400 x 1,050 x 2,500 mm, weight approx.: 250 kg ... más información
Description: Dimensions per crate 400 x 300 x 230mmApprox. Onsite Dimension. (l x w x h): 400x300x230 (40 pcs) mm, weight approx.: 90 kg ... más información
Description: Contents consisting of various clamping elements, bolts, colletsApprox. Onsite Dimension. (l x w x h): 700 x 500 x 1,800 mm, weight approx.: 70 kg ... más información
Description: Contents consisting of approx. 22 VDI 25 tool holders from the manufacturer WTO Suitable for Lot 1, Lot 10 and Lot 20Approx. Onsite Dimension. (l x w x h): 700 x 500 x 1,800 mm, weight approx.: 70 kg ... más información
84 sets, pallet attachment type 65, Cordes, ideal for stacking goods on Euro pallets – used- : Price for complete acceptance from site: 6.950.-€ (net)! Manufacturer: Cordes Type: Pallet Attachment Type 65 Year of manufacture: unknown With hook connection for pallet size 1200 x 800mm Effective depth; 800mm 800mm high 800mm wide Load capacity: 1.500kg Own weight per set approx. 22kg 4 stacking plates for safe stacking folding Original price: approx. 150.-€ Condition: very good Available: now Location: 74080 Heilbronn
Pallet wrapper, stretch machine for pallets, second-hand - : Price ex location: 4.250.-€ (net), incl. loading! Very robust device! Type HAD 1500 Completely overhauled by the manufacturer Equipment of the machine: Electrical control system completely overhauled (frequency converter) Foil brake (magnetic particle brake newly powder-powdered) adjustable Foil carriage restored Photocell for pallet height scanning Manual Functions Turntable remounted Drive-on ramp used Additional design: with wheelchair access (can be moved with forklift) Condition: very good Available: now Location: 91177 Thalmässing
Option to purchase a hall ensemble of approx. 6000 m2 in total (90 x 66 x 6.3 / 8.3 m) or parts thereof. 3-span steel hall in portal construction, which will soon be dismantled. It is a thermally insulated hall, whose supporting structure and most of the cladding as well as various accessories can be reused. APPROXIMATE DIMENSIONS Covered area: approx. 6000 m²; Width of the hall: approx. 66.40 m AK wall Wingspans: approx. (15 + 15) + 15 + 21 m center-center supports; Length of the hall: approx. 90.40 m AK wall; Frame spacing: approx. 5.00 m MM truss; Eaves height: approx. 6.30 m at the intersection of roof and wall; Ridge height: approx. 8.30 m building height; STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to support the building envelope is made of galvanized strip steel and ...