Fabricante:
(Categoría: 1403)
Max. load: 16t, span width: 20m, lifting equipment: GM5000.16000 ... más información
Cardboard strapping, Mosca, RO-TR 5, fully automatic –used-: Price per piece ex location: only 3.950.-€ (net) Manufacturer: Mosca Type: RO-TR-5 Year of construction: 2010 Currently, the machines work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm Nr.: 875 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2.5 A Control Voltage: 24V, DC Condition: good Available: now Location: Hanau area
RAKO Euro container blue 600x400x325 and 600x400x170 (lengthxwidthxheight) Over 10000 pieces per variety directly available. Simply pass on the required quantity, graduated prices possible! Very good and clean condition. Shipping per full pallet (32/56 pieces) possible, possible for an extra charge. Price net per container, plus VAT Cf9uhnejcv Minimum order 600x400x325 = 32 pieces! and 600x400x170= 56 pieces.
Gas-powered film shrinker, rollable, Ripack – second-hand - : Construction site price for pick-up this week from location: 5.500.- € (net), dismantled, packed and loaded! Later price from warehouse Frankenberg/Saxony: 5.950.- € (net), dismantled, packed and loaded! Manufacturer: Ripack, FR Type: Turbopack Year of construction: 2010 Gas: Propane Connected pressure: 3 bar Weight: 110kg Max. shrink height: 220cm Nominal heat load: 190kW Connected load: 163,400 Kcal Condition: good Available: immediately Location: Rhein Main / later Frankenberg / Saxony
Chassis, electric motor, DC motor, traction motor, drive motor-Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker type: ERC 205-Motor: Type GF106-G3 24V 2.0 kW-Motor brake: Type IQ BFK458-10E-Wheel: 230082mm-Dimensions: 300/210/H650 mm-Weight: 64 kg ... más información
Landing gear, support wheel, swivel wheel-Manufacturer: Jungheinrich, chassis jockey wheel swivel wheel from pedestrian stacker type: ERC 205-Wheel size: 140 x 54 Type GF106-G3 2.0 kW-Dimensions: 240/190/H280 mm-Weight: 16.6 kg ... más información
Approx. 20,000 shepherd's boxes / open fronted storage bins Suitable for the currently available Stow racking system with a length of 1,100 metres 3 sizes 50 cm deep Types: Open fronted storage bins LF532 LF533 LF543 These open fronted storage bins are currently available at SSI Schaefer. We would be happy to plan the new use Stock: •8,700 LF532 red/blue Approx. 50x30x20cm •9.500 pcs LF533 blue Approx. 50x30x30cm •1.400 LF 543 blue Approx. 50x45x30cm Partial quantities are also available General conditions: The containers can be purchased by the buyer himself. Palletized and packaged Or we can organize the Packaging and palletizing SSI Schaefer Shelf boxes are universally applicable and worldwide Standard Scheduling: The plant will be in operation until summer 2024, Viewings in the current Operations are possible. In late summer 2024, th ...
Description: a total of 2 fields, total width approx. 6150 mm, shelf height approx. 2760 mm, maximum compartment load 3700 kg, maximum field load 10800 kg, without contentsApprox. Onsite Dimension. (l x w x h): 6,150 x 1,250 x 3,300 mm, weight approx.: 180 kg ... más información
3x available. Manufacturer: Kardex Model: Shuttle-XP-500-2450x813 Version: H/N55/N22D18B/N75D13/20 Total payload: 2x 33500kg and permissible shelf load 370kg Very good condition, fully functional. Built in 2010 and inspected annually by Kardex. All documents for the devices are available. Dimensions: 3mx2.8mx10m (depthxwidthexheight) The fire protection system/smoke extractor can be purchased optionally if required (see last picture). Price incl. VAT & incl. dismantling, packing and loading by our team. Delivery possible throughout Europe for an extra charge.
Chassis, electric motor, DC motor, traction motor, drive motor, steering motor-Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205-Type: GNM 5460-G18.5-MIR1 Ser. H-Motor: 24V/240W-Dimensions: 135/130/H365 mm-Weight: 7.5 kg ... más información
Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack-Cantilever rack: one-sided, 2 bays type KR29 L height 2480 mm-Cantilever arms: 5 levels / shelf height adjustable in 60 mm increments-Cantilever arm length: 600 mm-Field load max. 1075 kg-Accessories: incl. 2 shelves-dimensions: 2220/730/H2480 mm-Total weight: 155 kg
Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well as roof and wall diagonals made of round steel (diameter 16 mm). ROOF: Hösch Isorock Integral D 115 MW roof panels, component width 1000 mm, sheet thickness 0.50 mm inside and outside (core thickn ...
Clocking film packaging machine, Beck with additional printer – used- : Price from location: 35.000.-€ (net)! Manufacturer: Beck Packautomaten Type: Serial packer SX / S 1115X Year of construction: 2011 Machine number: 1111 0215 Conveyor belt: Type: B 200/9,2, no.: 1111 4568, AB C514 Weaver Model 2050 CC Type: 20 – LH – CL412NX S/N 50018630 Year of construction: 2017 Sato Barcode Printer Model CL4NX Original price: approx. 100.000.-€ Condition: good Available: now Location: Wenkbach Information according to manufacturer: This fully automatic film packaging machine works according to the special beck series packer principle with 2 rolls of flat film for 4-sided product shrink-wrapping. The serial packer principle ensures a permanently guided and controlled product and film run for the production of tight, shapely packages with fine weld seams. The f ...
Description: System PR 600 , without contents, max. bay load 15900 kg, support profile P 15 , shelf load 4500 kg, with grating shelves and safety netsApprox. Onsite Dimension. (l x w x h): 12,900 x 1,250 x 5,000 mm, weight approx.: 1,200 kg ... más información
Wall slewing crane, hall slewing crane, hall crane, workplace crane-Manufacturer: Abus, wall slewing crane type VW, load capacity 1000 kg-Throat: 5230 mm-Swivel range: 270°-Chain hoist: ABUS-Lifting speed: 1.30/5.00 m/min-Chain length: 3.35 m-Transport dimensions: 5300/1450/H1320 mm-Weight: 750 kg ... más información
50 pieces of truss/carrying bar S70 L. 2.350 mm, top flush welded, max. Bel. / pair = 750 kg (assuming evenly distributed load), e.g. for 2 x industrial pallet of 1,000 mm / 375 kg side by side, colour RAL 6029 (mint green), very good condition Price of EUR 12.50 + VAT. + 100 hedging pins € 0.50 = net € 50,-
Hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve-Manufacturer: Toyooki, hydraulic control from CNC machining center Santenberg GTC S 2-Pressure switch: Parker Senso Control SCPSD-016-14-15-Control valves: coax 5-VMK 32 NC / 1 824 210 291-Individual components: see photos-Delivery/price: complete-Dimensions: 340/145/H510 mm-Total weight: 14.7 kg
Hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve-Manufacturer: Toyooki, hydraulic control block from CNC machining center Santenberg GTC S 2-Control valves: HD3-2W-BcA-025AY-WYD2 / HD3-2WD-BcA-025A-WYD2-Pressure reducing valve: HG3H-P-D3-025Y-Check Valve: HK3H-P-Q1-025Y-Individual components: see photos-Delivery/price: complete-Dimensions: 300/135/H250 mm-Total weight: 14.8 kg
Hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve, hydraulic distributor block, hydraulic distributor, block distributor-Hydraulic distribution: hydraulic distribution block from CNC machining center Santenberg GTC S 2-Individual components: see photos-Delivery/price: complete-Dimensions: 300/210/H190 mm-Total weight: 8.4 kg
Workplace equipment, swivel bracket for device holders, monorail ceiling system for device holders, mounting arm, mounting gallows, swivel arm, wall swivel bracket-Manufacturer: ZascheSwivel boom: Type WSK-45/6.0-Outreach: 6010 mm-Load capacity: 45 kg-Dimension: 6140/215/H700 mm-Total weight: 162 kg ... más información