Fabricante:
(Categoría: 502)
Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual
Specifications H&G HG/SV 11, Presto SP screw compactor 15 pieces available, made between 2004-2014 Weight: 1 800 kg Year of construction: 2004-2014 Tank volume: 25 m3 Power supply: 400V/50Hz 11 kW New containers available for the presented screw press ... más información
Specifications Maximum pressure: 60 tons Power supply: 400V / 7.5 kW Pressing force: 4.54 kg/cm² Year of construction: 2002 Bale size: 1200x1100x1100-1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 600 kg Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of construction: 2004-2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.
Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape. ... más información
Vertical baler Dixi 60 SH, built in 2009 Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SH Drive power: 7.5 kW Press force: 60 t Cycle time: 36 s Pressing time: 16 s Filling opening: 1160 x 550 mm Filling height: 1180 mm Bale size: 1200 x 800 x 1100 mm Bale weight: 340-500 kg Setting: manual Dimensions: 1890 x 1400 x 2170 mm Weight: 2430 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
Filling opening: 950 x 1300 mm (W x L) Briquette dimensions: 200 x 200 x 100-300 mm (W x H x L) Briquette weight: approx. 200 to 450 kg/m³ (depending on material) For fully automatic compaction of cardboard, polystyrene, aluminium and plastic to briquettes ... más información
Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834
Pressing force: 3.5 tons Connection: 400 V Engine: 1.1 kW Container: 660-1100 litres Height open: 1930 mm Width: 1210mm Depth: 1200mm ... más información
Dimensions: Length 4240mm Width: 1850mm Height: 2015mm Weight: approx. 8.000kg Briquette diameter: 105mm Working pressure. 300bar Control pressure I.: approx. 70bar Required oil quantity: approx. 800l Control: Simatik Connection load of the machine: approx. 30kW ... más información
Cardboard press, paper press Horizontal version bale size 60x70x70 cm with cutting device Make HSM 14 to Presskraft older model year unknown. Very comfortable due to Insertion shaft and cutting device. The finished bale can be placed directly on a Pallet can be pushed out. Has a large hydraulic agregat runs very fast and quiet. Sale without guarantee/liability or warranty for VB 3.600,--€ plus VAT VAT. Peter Knam Sweden 7 D-88085 Langenargen peterknam.de 07543/4242
Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...
Styrofoam briquetting press With an innovative technology, the press compacts bulky foam waste from EPS (polystyrene®) into easy-to-handle blocks in an extremely economical way. The extreme volume reduction achieved in this way in a ratio of up to 40:1 not only saves transport and disposal costs to a considerable extent, the blocks produced can also be recycled as raw materials and contribute to a quick amortization. - Long service life due to robustly designed drive technology - Efficient process due to fully automatic pressing pressure control, with predetermined breaking point function and individual block length - Hours of operation without overheating and fusion due to optional water-cooled pressure channel - Convenient, fully automatic operation due to state-of-the-art control - High cost-effectiveness due to low operating and maintenance costs - Simplest commission ...
Dear customers, currently we offer a polystyrene press incl. shredder for sale. It is a new machine that has 0 operating hours! Here are a few more technical details: Material to be processed: EPS moulded parts and chips Maximum material density that can be processed: 18 kg/m³ Loading opening: 700 x 360 mm Filling height 1,402 mm Achievable compaction: up to 250 Kg/m³ System throughput: up to 15 kg/h Block dimensions: 130 x 130 mm Power supply: 3x400 VAC+N+PE 50 Hz Connected load: 1.5 KW, 400V 50Hz incl. automatic press pressure regulation with pellet holder Finish: RAL 7035 (light grey) combined with RAL 2011 (deep orange) Incl. water dosing system for direct screw cooling up to 10 litres/h with water shut-off valve. Price plus VAT, which will be shown separately on the invoice. Transport possible worldwide for an extra charge! If you have any questions, please d ...
Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!
Completely overhauled HSB 15 incl. certified oil pan and protective fence for a quick and Trouble-free commissioning. Overhauled in 2021 Optional new 8m3 bunker and conveyor screw available. Including. Used machine warranty ... más información
: gebraucht : 2005 : 7289 : prompt, Zwischenverkauf v : Italien : 13800 €: 1 : 20 to: 550 mm: 370 mm: 110 mm: 5 - 75 mm: 160 1/min: 187 x 143 mm: 35 mm: 38 mm: 185 mm: 225 mm: 225 mm: 1,5 kW: 1050 mm: 1250 mm: 2100 mm: 1150 kg2 V-guidesFront and side table shielding by safety doors2-hand control and foot pedalClamping plateThickness table and clamping plate 50/50 mmUser Manual in GermanCE Declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 70 to: 4 mm: 920 mm: 500 mm: 180 mm: 12 - 120 mm: 50 - 80 1/min: 8 : 80 mm: 260 mm: 560 mm: 7,5 kW: 1225 mm: 1865 mm: 3060 mm: 7000 kgouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakeAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.