Fabricante:
(Categoría: 502)
used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, - ...
automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side
automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx. 23.0 t Machine will be dismantled in January 2021. Subject to errors in the technical data!
Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2011 Machine no.: 407.00.360 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.016 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
used box press Manufacturer: PAAL Type: HS 34 specifications: Filling box size: 1,000 x 700 x 2,200 mm (W x D x L) Filling opening: - 1st filling: 2,200 x 1,000 mm - 2nd filling: 1,200 x 1,000 mm Press pressure: approx. 18 t Drive power: 4 kW Lifting speed pre-pressing and retraction: 2.5 m/min. Lifting speed repressing: 1.25 m/min. Bale size: approx. 700 x 1,000 x 1,300 mm Bale weight: up to approx. 300 kg Weight of the machine: approx. 2000 kg Machine dimensions: 3,500 x 1950 x 1,450 mm (L x W x H)
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.024 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
used cabinet press Manufacturer: HSM Type: 155.2 VL Year of construction: 05/2002 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling chamber - 1100 - 700 x 1130 mm Bale size: 1.100x700x950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Capacity: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
Horizontal Hydraulic Press Function: Making Bullets Tying: Automatic Brand: Jovisa Model No.: JS-400-VA Engine: 7.5 KW (10 hp) Bullet size: 800x500 mm Bale weight: 300 Kg approx Feeding mouth: 1200x800 mm. Reference: MF-0090 ... más información
Horizontal hydraulic baling press with manual tying, brand: HSM, model: HL4010 Re, engine: 9 KW (12 hp), year: 2013, bale dimensions: 750x750 mm, bale weight: 280-300 Kg. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Horizontal hydraulic press with automatic vertical tying, exit tunnel: 800 x 700. Inlet: 1.05 x 720, engine: 15 hp, with electrical panel. ... más información
Horizontal hydraulic baling press with manual tying. Engine: 40 hp, bullet size: 1000x900 mm, bullet weight: 600 Kg. ... más información
Hydraulic press for metal cans, make: Serman, model: HI, year: 2012, engine: 4 Kw (5,5 hp), drawer: 550x450 mm. MF-0068 ... más información
Horizontal hydraulic baling press, with manual tying, brand: Faes, bale size: 0.80x0.60 m, material inlet mouth: 1.15x0.75 m, engine: 10 hp. ... más información
Baling press, make: Imabe, motor: 25 hp, bullet measurement: 800x800 mm. Semi-automatic side tying. Entrance mouth: 1,10x0,80. With electrical panel and mounted on multilink. Second-hand hydraulic press at the best price. Machinery checked and guaranteed by expert technicians Save money! ... más información
This Bench Top Press from Craver is in machine storage at Plastima Used Machinery. The machine is from 1994 and is in good condition – Brand: Carver – Model: 3393-682 – Year built: 1994 ... más información
Baler Balemaster EO 399, built in 2012, with tamper Specifications: Manufacturer: Balemaster Europe Type: EO 399 Year of construction: 2012 Hours: 60,924 Drive power: 55 kW Press force: 103 t Filling opening: 1000 x 2000 mm Bale dimensions: 800 x 1100 mm Capacity: 211-495 m³/h Binding: 4-fold, automatic Dimensions: 9900 x 2200 x 2450 mm Weight: approx. 20,000 kg Material: Corrugated cardboard, paper, foil The press was serviced annually and the wear parts were replaced. In 2020, the master cylinder was replaced.
Specifications Maximum pressure: 82 tons Year of construction: 2012 Pressing force: 97 tons/m² Number of bindings: 5 - fold vertical Trunking cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Weight: approx. 25 tons Power supply: 400 V/ 55 kW Bale binding: automatic Press capacity at idle: max 576 m³ / hour Press capacity under operating conditions: max 267 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9 tons/hour Theoretical throughput to density 60 kg/m3: approx. 14 tons/hour Theoretical throughput to density 100 kg/m3: approx. 21 tons/hour
Maximum pressure: 95 tons Year of construction: 2008 Pressing force: 115 tons/m² Number of ties: 4-fold vertical Duct cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Power supply: 400 V/ 75 kW Bale tying: automatic Specifications No-load capacity: max 340 m³ / hour Theoretical throughput to density 35 kg/m³) 11.5 tons/hour Theoretical throughput to density 60 kg/m³) 20 tons/hour Theoretical throughput to density (100 kg/m³) 32 tons/hour Brief description of the features: • Open hopper allows filling with the conveyor belt • Knife on the press plate and on the frame of the press to cut off the excess raw material • Automatic rod • Automatic channel regulation • Choice of the length of the finished bale • Compact hydraulic power unit with low noise level emissions • Press plate stably guided ...