compresores usadas para la venta

MADE BY KAESER TYPE AIRCENTER SK22T S/N 2324 YEAR 2012 POWER (kW) 11 SPEND. (m3/min) 1.85 PRESSURE (bar) 8 INVERTER no WBUD. DEHUMIDIFIER yes EXCHANGER no COOLED (POW/WATER) air ON THE TANK yes 350 L  ... más información

PROD. KAESER TYP ASD47 SFC S/N 3068 YEAR 2013 POWER (kW) 25 EFFICIENCY (m3/min) 1.07-5.27 PRESSURE (bar) 8,5 INVERTER YES EXCHANGER YES  ... más información

PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5  ... más información

oil-free compressor PROD. ATLASCOPCO TYPE ZT55VSD S/N API786865 YEAR 2011 POWER (kW) 55 PUMP (m3/min) 8.55 CIS (bar) 8.6 HRS (DOC/GENERAL) 45620/45924 WAVES yes BUILT. DRYER no EXCHANGER no COOLED (POW/WATER) air ON TANK no DOCUMENTATION no CONNECTION 2 1/2 NEW/USED USED

PROD. KAESER TYPE ASD50 T SFC S/N 1442 YEAR 2014 POWER (kW) 25 OUTPUT (m3/min) 1.07-5.27 CIS (bar) 8.5 HRS (DOC/GENERAL) 12822/15055 WAVES yes BUILT. DRYER yes  ... más información

Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer  ... más información

Screw compressor Manafacture: Atlas Copco Type: GA15 VSD FF Year of construction: 2022 Operating hours: approx. 4,400 Weight: 280 kg Pressure vessels on request  ... más información

Demag Compressor 080IIH Pressure generator from 1986, complete (closed module) 1 available 505 m3/h, 6 bar. Manufacturer: Mannesmann Demag Model No.: 080IIH Type: piston compressor Serial Number: 920 501 / 78 Capacity flow rate [m3/h]: 505 Pressure outlet [bar]: 6 Power [kW]: 45,5 Year of construction: 1986 Running hours [h]: – Weight [kg]: 1.978 Dimensions LxWxH [cm]: 246x122x143

PROD. DOOSAN TYP 12235 S/N UN512235FAY893775 ROK 2010 MOC (kW) 224 WYDAJ. (m3/min) 23.4 CIS (bar) 13.1 GODZ (DOC/OGÓL) FALOWNIK nie WBUD. OSUSZACZ nie  ... más información

PROD. KAESER TYP BSD81 S/N 1432 ROK 2009 MOC (kW) 45 WYDAJ. (m3/min) 7.12 CIS (bar) 8 GODZ (DOC/OGÓL) 12304 / 20984  ... más información

PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5  ... más información

PROD. KAESER TYP DS201 S/N 1001 ROK 2002 MOC (kW) 110 WYDAJ. (m3/min) 22 CIS (bar) 10 GODZ (DOC/OGÓL) ok 17500  ... más información

Wittig Compressor ROL 65 Pressure generator from 2000, complete (closed module) 1 available 357 m3/h, 8 bar. Manufacturer: Wittig GmbH Model: ROL 65 Type: piston compressor Serial Number: 920171/17 Flow rate [m3/h]: 357 Pressure outlet [bar]: 8 Power [kW]: 37 Year of construction: 2000 Running hours [h]: – Weight [kg]: 1.071 Dimensions LxWxH [cm]: 111x90x180

Functioning  ... más información

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

Capacity: 13 litres Pressure: 15 bar ... más información

Immediately available from stock - about 30 second hand screw compressors Boge from 7.5 kW – 200 kW ... más información

High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Work counter under load: 27.062 h Weight: 1800 kg Year of Build: 2007 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine

High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Load counter: 24.138 h Weight: 2300 kg Year of Build: 2012 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine

KAESER SK 26 compressor system • KAESER SK 26 screw compressor • Effective flow rate 2.27 m³/min. • Pressure 8.5 bar • Motor power / speed 15 kW / 3000 rpm. • KAESER – CONTROL – Command • Compressed air boiler 2,000 liter boiler capacity with automatic steam trap • Compressed air – TB 45 refrigerant dryer, volume flow 4.5 m³/min., automatic steam trap, nominal power 1.05 kW, voltage 230 V / 50 HZ, bypass and hose line to the boiler • Oil-water separator AQUWAMAT 4 Machine technically and optically in very good condition